
The Rode Wireless Transmitter for Wireless Go II System is a convenient and efficient way to capture high-quality audio on the go. It's a small, lightweight device that can be easily clipped to a shirt or attached to a camera.
The transmitter has a long battery life, lasting up to 7.5 hours on a single charge, making it ideal for extended shoots or events. It also features a compact design that won't get in the way of your creative process.
The Wireless Go II System is designed to be easy to use, with a simple and intuitive interface that makes it easy to pair the transmitter with the receiver. This allows you to focus on capturing great audio without worrying about technical details.
Take a look at this: Wireless Audio Equipment
Key Features
The RØDE wireless transmitter is a powerful tool for capturing high-quality audio on the go. It's equipped with a versatile wireless transmitter that uses Series IV 2.4GHz digital transmission with 128-bit encryption.
This level of encryption ensures that your audio is secure and protected from interference. The transmitter also features a high-quality, built-in omnidirectional microphone that's perfect for capturing crisp and clear audio.
One of the standout features of the RØDE wireless transmitter is its on-board recording capabilities. It has over 40 hours of internal memory, allowing you to record for extended periods without needing to worry about running out of space.
The transmitter also has a 3.5mm TRS analog input for connecting lavalier and VideoMics, giving you a range of options for capturing audio. And with a 200m transmission range (line-of-sight), you can move around freely without worrying about losing the signal.
Here are the key features of the RØDE wireless transmitter at a glance:
- Series IV 2.4GHz digital transmission with 128-bit encryption
- High-quality, built-in omnidirectional microphone
- On-board recording – over 40 hours of internal memory
- 3.5mm TRS analog input for connecting lavalier and VideoMics
- 200m transmission range (line-of-sight)
Transmitter Unit
To pair your transmitters to the receiver, press and hold the power button on the transmitters one at a time. This is a straightforward process that should take just a few seconds.
The transmitter unit has a USB-C connector, which is a convenient feature for charging or connecting to your device.
To turn on your Wireless GO II transmitter, press and hold the power button.
Setup and Connectivity
To set up your RØDE Wireless GO II transmitter, start by taking both transmitters from the charging case and removing the stickers covering their charging pins. Then, place them back in the case.
The transmitters' LEDs will now flash, indicating they're ready to be paired with the receiver. To pair them, connect the receiver directly to your phone, and its LEDs will flash and then turn solid when paired to the transmitters.
You can connect your Wireless GO II to cameras and other devices with a 3.5mm TRS input using the supplied SC5 cable. Alternatively, use an adaptor like the VXLR Pro if you need to connect your microphone to a device with an XLR input.
To connect the receiver to a computer, use the supplied USB-C to USB-A cable. This essentially turns the receiver into a wireless USB audio interface, which you can select as your input device in your audio settings.
Related reading: Beats Audio Wireless
You can connect the Wireless GO II to a smartphone or tablet, but you'll need additional cables. For iOS devices with a Lightning input, use the SC15 or SC19, while for Android and other devices with a USB-C input, use the SC16 USB-C to USB-C cable.
To pair up to two Wireless GO II transmitters to the RØDECaster Series, access the channel set-up screen by pressing the physical button above the fader you wish to assign your wireless device to. Then, scroll to the left to select the ‘Wireless’ option and tap ‘Pair New Device’ to enter pairing mode.
The Wireless GO II is MFi-certified, meaning it will seamlessly interact with any iOS device. However, to use RØDE Central Mobile on iOS devices, you'll need to update your Wireless GO II firmware, which can only be done via the RØDE Central desktop version.
RØDE Central is an easy-to-use desktop and mobile companion app that allows for complete device configuration anywhere. You can use it to configure the on-board recording function, unlock advanced features, and more.
Here's a quick rundown of the cables you'll need to connect your Wireless GO II to different devices:
- SC5 cable for 3.5mm TRS input devices
- VXLR Pro adaptor for XLR input devices
- SC15 or SC19 for iOS devices with a Lightning input
- SC16 USB-C to USB-C cable for Android and other devices with a USB-C input
Settings and Controls
The Wireless Micro offers several features and settings adjustable via RØDE companion apps, including RØDE Central and RØDE Capture. You can connect the receiver to your computer or phone and pair the transmitters to access and adjust various system and transmitter settings.
Output Gain can be adjusted to control the volume level of the Wireless Micro. Split and Merged Modes allow you to record audio from both transmitters combined or send one transmitter's audio to the left channel and the other to the right.
Noise Reduction can be toggled individually for each transmitter to minimize background noise, and it comes in three levels: OFF, LOW, and HIGH. The gain control is a three-stage pad that cuts your output level in 12dB increments, allowing you to select between high, medium, and low gain settings.
You might enjoy: Audio Jack Wireless
Adjust Settings via Companion App
You can adjust settings on the Wireless Micro using RØDE companion apps, such as RØDE Central or RØDE Capture.
These apps allow you to access and adjust various system and transmitter settings, making it easy to customize your recording experience.
To connect your receiver to your computer or phone, ensure the transmitters are out of their case, powered on, and paired to the receiver.
You can then use the app to adjust settings like Output Gain, Noise Reduction, and Split and Merged Modes.
The RØDE Capture app also features a new Direct Connect feature, which allows you to pair up to two transmitters directly to your phone via Bluetooth connectivity.
This means you can record directly into the app without a receiver, and access key settings like Noise Reduction and Gain Control for each transmitter.
Noise Reduction can be toggled individually for each transmitter and has three levels: OFF, LOW, and HIGH.
You can adjust this setting via RØDE Central or RØDE Capture when the receiver is connected, or via RØDE Capture when a transmitter is directly paired.
Split and Merged Modes are also adjustable via the app, allowing you to customize your recording setup to suit your needs.
You might like: Wireless Access Point
Camera Presets
Camera Presets are a game-changer for filmmakers and videographers who use the Wireless GO II transmitter with various cameras.
You can access these presets by connecting your Wireless GO II receiver to your computer and opening RØDE Central. Click 'Gain Mode' to cycle through the options until 'Camera' is selected.
The presets automatically set the gain levels of your Wireless GO II to match the audio levels and settings of the camera you're using. This ensures optimal sound quality and minimizes the need for manual adjustments.
To load a preset, click the '+' button, select the manufacturer and model of your camera, and follow the instructions provided. You'll also find a link to a guide on setting up your camera's audio settings.
You can cycle through all the loaded presets by pressing the gain control/mute button on your receiver. This is super convenient when you're working with multiple cameras on set.
A fresh viewpoint: Wireless Set No. 1
A 'WIGO2' option is also available, which acts as a default preset. You can adjust the gain level of this preset within the RØDE Central desktop app.
You can also create your own custom presets by selecting 'Custom' from the list of manufacturers. This is a great way to save your favorite settings for specific projects or cameras.
In 'Record' mode, tapping on the transmitter's Ø button will begin the on-board recording, and another press will end the recording.
Battery and Power
The Wireless GO II's battery life is impressive, lasting up to seven hours on a single charge.
You can extend this battery life by using power saver mode, which turns off the LED backlight after 10 seconds of inactivity.
The small sun icon on the receiver screen indicates whether power saver mode is engaged or not, with a full sun icon meaning it's turned off.
To turn power saver mode off, simply single-click the power button, and the backlight will stay on.
The transmitters have a built-in lithium-ion battery, and when the battery is low, the battery LED will start flashing, getting faster when it's very low.
You can easily check the battery level of each unit on the receiver screen, with a green outline indicating a fully charged battery and a red outline indicating a very low battery.
The Wireless GO II can be recharged using the supplied USB cables, and you can still use it while it's charging.
Each transmitter features a high-quality in-built omnidirectional condenser capsule, designed to pick up sound from all around in great detail.
To protect the capsules from wind or background noise, use the supplied furry windshields, which have been redesigned for a strong connection.
The Charge Case for Wireless GO II is an optional accessory that securely stores and recharges your wireless kit on the road or at home, giving you up to 21 hours of use in total.
To charge your Wireless GO II transmitters and receivers, place each unit in the case with the USB-C port facing down and the flat face of the transmitter or receiver aligned with the flat side of the cavity.
Here's an interesting read: Wireless Usb C Transmitter
App and Recording
The RØDE Wireless Micro offers a range of features and settings adjustable via RØDE companion apps. You can connect the receiver to your computer or phone and use RØDE Central or RØDE Capture to access and adjust various system and transmitter settings.
With the RØDE Capture app, you can even pair up to two transmitters directly to your phone via Bluetooth connectivity, allowing you to record directly into the app without a receiver.
Output Gain is a key setting that adjusts the volume level of the Wireless Micro, while Split and Merged Modes give you flexibility in how you record audio. In Merged mode, both transmitters' audio is combined, but in Split mode, you can send one transmitter's audio to the left channel and the other to the right.
Manage and Export Recordings
Managing your recordings is a breeze with this app. You can access your recordings from the home screen and view them in a list or calendar format.

To view a recording, simply tap on it and you'll be taken to a playback screen where you can listen to or delete the recording. Tap the three dots to view more options.
You can also edit the title and description of a recording, which can be helpful if you want to keep track of what a particular recording is about. Tap the pencil icon to make changes.
To export a recording, tap the three dots and select "Export". You can choose to export the recording as an MP3 or WAV file, depending on your needs.
Audio Compression vs. Original
Compressed audio is a convenient option for recording long sessions, storing over 40 hours of audio on the Wireless GO II transmitter.
Recording in a compressed format is only available when 'Backup Recording' mode is selected.
In this mode, you can store more audio than the initial 24+ hours stated when the Wireless GO II was launched, thanks to firmware updates that have optimized storage capability.
The uncompressed recording mode, on the other hand, uses a 48KHz, 24-bit audio stream and can store around seven hours of audio.
This mode is the only option available when using the 'Always' and 'Button' recording modes, resulting in high-quality WAV files that can be accessed as USB files.
Receiver
The Wireless GO II's receiver features a dual channel setup, allowing you to connect two transmitters for recording two sound sources into a single device.
Out of the box, the transmitters come auto paired to the receiver and will remember which channel they’ve been assigned to.
The receiver’s LED screen is split into four main sections, displaying icons for battery life, signal strength, input level, battery life, backlight mode, and output gain.
An output level meter for the receiver makes it easy to monitor the levels going into your camera or recording device and ensure your signal isn’t too hot.
If a transmitter loses connection with the receiver, the blue ‘∞‘ LED on the transmitter will flash and the icons for that channel will go blank on the receiver.
To reconnect a transmitter, press and hold the pair button (‘∞‘) on the receiver for three seconds, then single-click the power button on the transmitter.
The Wireless GO II utilises RØDE’s all-new Series IV 2.4GHz digital transmission with 128-bit encryption, delivering an extended transmission range of 200 metres (line of sight).
A unique perspective: Military Cofdm Wireless Signal Transmitter
Featured Images: pexels.com


