
Protractor is a powerful end-to-end testing framework for Angular 2 applications, and it's a game-changer for ensuring your app works as expected.
Protractor uses Selenium WebDriver to interact with your Angular 2 app, simulating user interactions and verifying that your app behaves correctly.
To get started with Protractor, you'll need to install it using npm, the Node Package Manager, as described in the "Installing Protractor" section.
Protractor's configuration file, protractor.conf.js, is where you'll set up your test environment, including the browser, test timeout, and other settings.
Here's an interesting read: 2 Messenger App
If this caught your attention, see: Android Studio 插件
What Is Protractor?
Protractor is an end-to-end testing framework for Angular 2 applications. It helps you test your application from the user's perspective, simulating real user interactions.
Protractor uses the Selenium WebDriver protocol to interact with your application. This allows it to control the browser and simulate user actions.
Protractor is built on top of Jasmine, a popular testing framework for JavaScript. This makes it easy to write tests that are readable and maintainable.
Protractor is widely used in the industry due to its ease of use and flexibility. It supports multiple browsers and platforms, including Chrome, Firefox, and Safari.
Protractor's main advantage is its ability to test complex scenarios and interactions, such as navigating through multiple pages and filling out forms. This makes it an essential tool for testing Angular 2 applications.
Setting Up Protractor
To set up Protractor, you'll need Node.js and the Java Development Kit (JDK) installed on your machine. Once you have these prerequisites in place, you can install Protractor globally using npm.
You'll need to type the following commands in your command line to install Protractor and the webdriver-manager: npm install -g protractorwebdriver-manager updatewebdriver-manager start This will install two command line tools, protractor and webdriver-manager, and start a local Selenium server on your machine.
You can verify that Protractor is installed correctly by running the command `protractor --version` in your command line.
Configure Your Machine
To configure your machine for Protractor, start by installing Node.js, which is used to build applications and manage JavaScript nodes. You can take the defaults for the Node.js Setup Wizard.
First, verify that Node.js is installed by typing `npm –version` in your command line. If you see a version, it means that Node.js was successfully installed.
Next, run the `npm install –g protractor` command to install everything on your machine that you need to run Protractor. NPM acts as Node's package manager.
Once Protractor is installed, verify that it's working by typing `protractor –version` in your command line. If you see a version, it means that Protractor is installed correctly.
To ensure that Protractor is working smoothly, you'll also need to update the Selenium WebDriver by running `webdriver-manager update`.
Finally, start a local Selenium server on your machine by running `webdriver-manager start`. This will start a server and output a bunch of info logs. Take note of the URL, which is `http://localhost:4444/wd/hub`.
A unique perspective: Next Js vs Angular
Choosing a Scripting Language
If you're using Angular 1, it's best to go with JavaScript for your Protractor automation scripts.
The choice between JavaScript and TypeScript depends on the version of Angular you're using - Angular 2 and beyond require TypeScript.
You'll need to decide which language to use early on, as it will affect your entire setup process.
Here are some key points to consider when choosing a scripting language:
- Angular 1: JavaScript
- Angular 2 and beyond: TypeScript
This choice will set the tone for the rest of your Protractor setup.
Writing a Test
Protractor needs two files to run a test: a Spec file and a Config file. The Spec file is the test file that defines your test case or suite, while the Config file defines the parameters that will be passed to Protractor to execute your Spec file.
You can use either JavaScript or TypeScript to develop your test, and Protractor will run it using a Jasmine-like wrapper called Jasmine WD. This wrapper allows you to write more concise and easier-to-read statements.
A fresh viewpoint: Run 2 Html5
The Config file is used to define the parameters such as Selenium server address, location of the Spec file, browser capabilities, and node options. You need to include your test case in the 'specs' array in the Config file.
Here are the parameters you need to define in the Config file:
Protractor will run your test and create a report with the test results. You can customize your report by using different options available in the protractor-jasmine2-screenshot-reporter package.
Discover more: Azure Soc 2 Report
Test Automation
Protractor is an end-to-end framework for Angular and AngularJS applications. It runs tests against your application using an actual browser, which allows you to test like a real user.
Protractor was specifically created for testing Angular apps; it supports out-of-the-box, Angular-specific locator strategies, which allows you to test Angular-specific elements without any setup effort on your part. This makes it a great choice for testing Angular 2 applications.
To run a test with Protractor, you need two files: a Spec file and a Config file. The Spec file defines your test case or suite, while the Config file defines the parameters that will be passed to Protractor to execute your Spec file.
Here are the key parameters you need to define in your Config file:
- Selenium server address
- Location of spec file
- Browser capabilities
- Node options
Protractor uses Jasmine as its default test framework, but you can also use other frameworks like Selenium and WebDriver. With Protractor, you can test your application's UI in a simple and fast way, creating fully automated test cases for web applications.
Protractor always executes test cases in a sequential manner, and both full and limited scope testing is possible through Protractor. This makes it a versatile tool for testing a wide range of applications.
To get started with Protractor, you can use the example project that comes with the Protractor installation. This project uses Jasmine and can be found under your User profile. To run the test, make sure your Selenium server is up and running, then navigate to the conf.js file and enter the command "protractor conf.js".
Recommended read: Watch Pretty Hard Cases Season 2
Troubleshooting
Troubleshooting can be a challenge, especially when dealing with complex frameworks like Protractor and Angular 2. If you're getting an error like "element is not visible" or "element is not enabled", check if the element is actually visible or enabled in the browser.
Make sure your Protractor configuration is set to wait for the element to be visible or enabled before trying to interact with it. This can be done by using the `element.all` method with the `visible` or `enabled` filter.
Common mistakes to avoid include trying to interact with an element that's still loading or hasn't finished rendering.
Notes & Problems
Some tests can be skipped in the test run by adding an x before the word it, i.e. xit. This will give a notice that one or more tests have been skipped.
If you have a large number of test cases, you can use the fit keyword to only run specific tests, but be aware that this will exclude all other tests.
Incorrect handling of Promises can cause asynchronous errors, so make sure to explicitly follow each Promise with a then to avoid errors.
Some events, such as pressing a button or querying whether an element is displayed, return a Promise, which should be handled carefully to avoid issues.
You can use the beforeEach function to write code that is executed before each test, like the navigateTo method, to ensure consistent setup.
Here's an interesting read: O Use Garmin Swim 2
Automatic Waiting in Testing

Automatic waiting in testing can be a real pain point, but Protractor makes it a breeze.
Protractor automatically knows when an Angular app is done loading, eliminating the need for explicit waits and sleeps in your tests.
This is a huge benefit, as waiting issues are a frequent cause of flaky Selenium tests.
Protractor's automatic waits are a game-changer, allowing you to focus on writing robust tests instead of worrying about synchronization errors.
In fact, you don't even need to add waits and sleeps to your tests with Protractor, as it recognizes the state of Angular components and waits for them to be available for interaction.
Protractor's ease of use is one reason it's preferred over Selenium with Java for some folks, due to its global variables.
Getting Started with Protractor
To get started with Protractor, you'll need to have Java JDK installed on your machine. If you haven't installed it yet, you can follow the instructions in the "How to Install Java" video.
Install nodeJS by clicking on the Install button on https://nodejs.org/. This is a straightforward process that will get you up and running with Protractor in no time.
First, open up the conf.js file using your favorite text editor. Make sure to change the name to joe_spec.js under the specs block.
Here are the basic steps to set up your machine and run a quick Protractor test:
- Install nodeJS
- Update the conf.js file to joe_spec.js
- Create a new file named joe_spec.js and add the necessary code
Save the config file and create a new file named joe_spec.js to get started with Protractor.
Example and Tutorial
Let's dive into an example of how to use Protractor with Angular 2. We'll create a simple test for a button that increments a counter.
First, you'll need to install Protractor using npm: npm install protractor.
To write a test, you'll need to import the necessary modules, including the Protractor API and the Angular 2 testing module.
The basic structure of a Protractor test is similar to a Jasmine test, with a describe block and an it block.
For example, to test a button that increments a counter, you might write a test like this:
```javascript
describe('Counter', () => {
it('should increment the counter when the button is clicked', () => {
// Get the counter element
var counter = element(by.css('counter'));
// Get the button element
var button = element(by.css('button'));
// Click the button
button.click();
// Get the new counter value
var newCounterValue = counter.getText();
// Expect the counter to have incremented
expect(newCounterValue).toBe('1');
});
});
```
This test uses the `by.css` method to find the counter and button elements, and then uses the `click` method to simulate a button click. The `getText` method is used to get the new counter value, and the `expect` function is used to assert that the counter has incremented correctly.
A different take: Angular Material Tutorial
Limitations and Considerations
Protractor Angular 2 has some limitations that you should be aware of.
A UI driven testing tool, Protractor Angular 2 provides only front-end testing. This means it's not suitable for testing backend functionality.
The tool doesn't offer detailed test reports, only test logs. This can make it difficult to track progress and identify issues.
Even though the framework is easy to understand, scripting tests can take more time than you might expect. This is because you need to define the test file using the Jasmine framework and set up the test suite.
Protractor Angular 2 is a sensitive tool with zero tolerance for errors. This means even a small mistake can cause the test to fail.
Unfortunately, mock modules are not yet supported on Angular v2+ apps. This can make it harder to test certain types of functionality.
Featured Images: pexels.com


