
MicroTCA is a versatile and compact platform that's perfect for a wide range of applications, including industrial control systems, data acquisition systems, and telecommunications equipment.
It's based on the Advanced Mezzanine Card (AMC) standard, which allows for hot-swappable modules and easy maintenance.
MicroTCA's compact size and high density make it ideal for space-constrained environments.
MicroTCA systems can be easily integrated with other systems, thanks to its open architecture and standardized interfaces.
The MicroTCA platform supports a variety of cooling systems, including air and liquid cooling, making it suitable for high-performance applications.
It also features a robust and reliable design, with built-in redundancy and fault-tolerance mechanisms to minimize downtime and ensure high availability.
History
The history of MicroTCA is a fascinating story. It all began with the rapid expansion of mobile telecommunications at the turn of the millennium, which created a huge demand for processing power in telecommunication systems.
The existing computing architectures of the time, known as "carrier grade", just weren't up to the task. They needed to be replaced with something more powerful.
In 2002, a group of about 100 companies came together to form the PICMG and developed the Advanced Telecommunications Architecture, also known as AdvancedTCA.
A few years later, in 2006, a standard was developed for smaller telecommunications systems at the edge of the network, called MicroTCA. It was designed to be more compact and less expensive than its predecessor.
MicroTCA systems soon found their way into non-telecommunication sectors, such as defence, avionics, and science.
Components
The MicroTCA architecture is built around a few key components. The MicroTCA Carrier Hub (MCH) is the central managing device of a MicroTCA card cage.
It manages power distribution and cooling, and often provides Gigabit Ethernet and/or PCIe/Serial RapidIO switching. Some MCHs also offer clocking capabilities.
In a typical setup, the MCH requires a dedicated slot on the backplane, but some backplanes support two MCHs for redundancy.
Card Cage
The card cage is a crucial component in many systems, and its primary functions are to provide mechanical stability to other components and ensure sufficient cooling.

It houses all the other components, so you can think of it as the main support system.
A card cage typically has two to 12 slots, and the type of modules it supports can vary, including MTCA.0 and MTCA.1.
The architecture of the installed backplane is also an important factor, but I won't get into that too much.
The cooling scheme used by the card cage is another key consideration, with options like airflow front-to-back, bottom-to-top, side-to-side, and conductive cooling.
Here are some common types of card cages and their characteristics:
Carrier Hub
The Carrier Hub is a crucial component in a MicroTCA card cage, managing power distribution and cooling.
It usually provides Gigabit Ethernet and/or PCIe/Serial RapidIO switching, making it a central device in the system.
Some Carrier Hubs also offer clocking, which is essential for synchronizing data transfer.
In a typical setup, there are dedicated slots for the Carrier Hub, often located on the backplane.
Some backplanes support two Carrier Hubs for redundancy, with one designated as primary and the other as secondary.
This redundancy ensures that the system remains operational even if one Carrier Hub fails.
Readers also liked: One Albania
Advanced Mezzanine Card
The Advanced Mezzanine Card (AMC) is a standard for hot-plugable PCBs that was originally developed for use in AdvancedTCA systems.
It specifies the dimensions of the PCB, with two width variants (single, double) and three height variants (Compact, Mid-size, Full).
AMCs have a huge variation of functionalities, including computing, storage, and graphics.
A computing AMC can be a module with a CPU, RAM, SSD, and on-board graphics.
Storage AMCs can be used as SSD carriers.
Graphics cards, FPGA cards, and FMC carriers are also examples of AMC functionalities.
Digitizer cards, which handle Analog-Digital and Digital-Analog Conversion, are another type of AMC.
AMCs can also be used for clocking and triggering.
Here are some examples of AMC functionalities:
- Computing
- Storage
- Graphics card
- FPGA card
- FMC carrier
- Digitizer card
- Clocking and Triggering
Rear Transition Module (MTCA 4)
The Rear Transition Module (RTM) is a key component in the MTCA.4 standard, designed to be connected directly to an AMC via a connector located in zone 3, requiring a double width AMC and RTM.
An RTM has about the same dimensions as an AMC, effectively doubling the available PCB-space per slot in an MTCA.4 card cage.
Its power is provided by the AMC, making it unable to operate on its own. A paired AMC is required for an RTM to function.
A mechanical code-pin was added to MTCA.4-compatible AMCs and RTMs to prevent the installation of an electrically incompatible RTM to an AMC.
The functionality of RTMs includes RF-signal pre-/post-processing, digital signal pre-/post-processing, clock-generation/-distribution, device interfaces, date storage, and CPU (only MCH-RTM).
Here's a list of some of the technical specifications and functionalities of RTMs:
- RF-signal pre-/post-processing (i.e. filtering, Up-/Down-conversion, Vector De-/Modulation)
- Digital signal pre-/post-processing
- Clock-generation/-distribution
- Device interfaces
- Date storage
- CPU (only MCH-RTM)
Architecture
The MicroTCA architecture is a robust and flexible framework that enables the creation of high-performance systems. It's based on a backplane that connects AdvancedMCs, MCHs, PMs, and other system components, facilitating data and power transfer within the system.
At its core, a MicroTCA system includes at least one AdvancedMC, one MicroTCA Carrier Hub (MCH), and the necessary interconnect, power, cooling, and mechanical resources. A typical system can support up to twelve AdvancedMCs.
AdvancedMCs provide core functionality including processing, storage, and I/O, and are integrated directly into the backplane. They come in six different sizes to cater to various system requirements.
Consider reading: One Hungary
A MicroTCA Carrier Hub (MCH) performs the same functions as a Carrier Board within an AdvancedTCA system, managing the AdvancedMCs and controlling data flow within the system. A single MCH can support up to twelve AdvancedMCs.
The backplane is the backbone of the MicroTCA architecture, connecting AdvancedMCs, MCHs, PMs, and other system components. It's designed to support high-speed data transfer and includes slots for AdvancedMCs, MCHs, and other modules.
The backplane uses differential high-speed SerDes serial links for data communication, supporting speeds of at least 3.125 Gbps in each direction. This enables support for 100 GbE and PCIe Gen 5 fabrics.
MicroTCA supports various fabric topologies, including star, dual star, and mesh, allowing for flexibility in system design. These topologies determine how data is routed between modules within the system.
Rear Transition Modules (RTMs) are optional components that provide additional connectivity and interfaces, such as extra ports, storage interfaces, or other specialized features.
Check this out: Data Communication
Design and Mechanics
The MicroTCA design is centered around compatibility with standard equipment racks, adhering to IEC 60297M and ETS 300 119-4 standards.
The foundation of the MicroTCA mechanical design is the Subrack, a structural framework that holds the modules and the backplane. It's equipped with card guides for aligning and securing the modules in place.
The Subrack is designed to accommodate different module sizes and configurations, making it a versatile component of the MicroTCA system.
Shelves are larger enclosures that can house one or more Subracks, and they're designed to be compatible with standard equipment racks. They're engineered to support the weight of fully loaded Subracks.
Shelves ensure adequate airflow for cooling and allow for easy access to the components for maintenance. They're a crucial part of the MicroTCA system.
MicroTCA supports flexible Shelf arrangements, giving you the freedom to design your system to meet your specific needs.
Cube and Pico Shelves are also available for applications requiring smaller enclosures. They adhere to the same design principles as Shelves but are optimized for compact use cases.
For your interest: Global Telecommunications System
Power and Cooling
The Power and Cooling components of a MicroTCA system are crucial for maintaining a stable and efficient operation.
The Cooling Unit (CU) is responsible for providing controlled airflow in air-flow-cooled card cages, typically consisting of an array of fans and a controller connected to the backplane. Some CUs are detachable for cleaning or replacement, while others are integrated and non-detachable.
The Power Module (PM) converts AC power to DC power for the system, providing both Management Power and Payload Power. It senses the presence of a module in a slot and immediately provides it with management power.
The Power Module comes in various form factors, input voltages, and output powers, making it a versatile component. It uses its own type of connector, which can only be installed into designated slots that can't carry any other type of module.
Some card cages provide an additional power module slot for redundancy, with one slot being primary and the other secondary, providing power only if the primary does not.
Explore further: Telecommunications Management Network
Cooling Unit
The Cooling Unit is a critical component in air-flow-cooled card cages, providing controlled airflow to keep components at a safe temperature.
It usually consists of an array of fans and a controller, which is connected to the backplane.
The MicroTCA Carrier Hub (MCH) can read-out temperature sensors and fan speed, as well as change fan speed via IPMI.
Some Cooling Units are easily detachable, making it simple to clean or replace them if needed.
Other card cages come with integrated, non-detachable Cooling Units, which can be a more permanent solution.
Power Module
The Power Module is responsible for converting AC power from the power line to the necessary DC voltages for the system. It's a crucial component that ensures the system has the power it needs to operate.
There are various types of power modules available, each with its own form factor, input voltage, and output power. You can find them in different sizes, such as double width or single width, and they can handle different input voltages like 110V or 220V.
The output power of a power module can range from 600W to 1000W, depending on the specific model. This means you can choose a module that meets the power requirements of your system.
A power module senses the presence of a module in a slot via a specified pin in the module connector, and immediately provides that module with management power. This is a convenient feature that ensures the module gets the power it needs right away.
The power module uses its own type of connector, which means it can only be installed into designated slots. These slots are specifically designed to accommodate the power module, and they can't carry any other type of module.
Some card cages provide an additional power module slot for redundancy, which is a great feature for ensuring system reliability. In such a case, one slot is the primary, which will provide power by default, and the other one is secondary, providing power only if the primary does not.
Here are some common features of power modules:
- Form factor: double width, single width
- Input voltage: 110 V, 220 V
- Output power: 600 W, 1000 W
Features and Benefits
MicroTCA is a technology that's all about flexibility and scalability. It's designed to work with the Advanced Telecommunications Computing Architecture (AdvancedTCA) standards, but in a smaller and more cost-effective way.
One of the key advantages of MicroTCA is its high performance. Revision 3.0 of the MicroTCA.0 specification introduces 100 GbE and PCIe Gen 5 fabrics that improve backplane performance by 4x.
MicroTCA is also very modular, which means you can easily add, remove, or replace components with minimal disruption to the rest of the system. This makes it perfect for applications that require ongoing maintenance and upgrades.
The standard Intelligent Platform Management Interface (IPMI) allows for failure detection and isolation, which is a huge plus for system management and interoperability.
Here are some of the key features and benefits of MicroTCA:
- High performance: 100 GbE and PCIe Gen 5 fabrics improve backplane performance by 4x
- Low cost: Consistent with Modular Open Systems Approach (MOSA) principles for reduced life cycle costs
- Modularity: Easy to add, remove, or replace components with minimal disruption
- Manageability: IPMI for failure detection and isolation
- Compatibility: Designed for integration into standard rack systems
In terms of specific configurations, MicroTCA supports fully redundant and non-redundant systems, including power budgeting and hot-swap configurations. It also defines complete component and system management, allowing for failure detection and isolation.
Here are some of the key components that can be managed with MicroTCA:
- Up to 13 AMCs (Advanced Mezzanine Cards)
- 4 Cooling Units
- 1-4 Power Modules
- Redundant architectures and fail-over procedure
- Configurable emergency shutdown of AMCs or entire system
Applications and Use
MicroTCA has a wide range of applications, including industrial control, mil/aero/avionics, automation, medical, communication, transportation, high-energy & nuclear physics, test and measurement, and telemetry.
These applications are diverse and can be found in various industries, such as energy, research and development, and civil aviation. For example, MicroTCA is used in high-density audio conferencing and MTCA solutions for wireless networks.
It's also used in various industrial automation applications, including operating telescopes at the European Southern Observatory (ESO) and controlling fusion reactors such as Wendelstein 7-X in Greifswald.
Some specific examples of MicroTCA applications include:
- High density audio conferencing
- MTCA solutions for wireless networks
- Energy industry
- Industrial automation
- Civil aviation
- Research and development
These applications showcase the versatility and reliability of MicroTCA, making it a valuable solution for various industries and use cases.
Products and Support
PICMG is a consortium of companies who collaboratively develop open standards for high performance telecommunications and industrial computing applications.
The MicroTCA Technology Lab offers a selection of DESY developments and products both on a commercial basis and as open source in support of the community. Its aim is to disseminate the MicroTCA standard and make DESY’s know-how in this area more widely available.
For an overview of offered products, click here to explore the portfolio, which ranges from solutions for MicroTCA management through high-performance image processing and various hardware components to the integration of complete systems according to customer-specific requirements.
If you need technical support or are interested in further topics and useful tools related to MicroTCA, the DESY website has a wealth of information on hardware design templates, PCIe drivers, the DESY Zone3 Recommendation, and other useful tools at your disposal.
Products and Developments
The MicroTCA Technology Lab offers a selection of DESY developments and products both on a commercial basis and as open source in support of the community.
Their aim is to disseminate the MicroTCA standard and make DESY’s know-how in this area more widely available.
The portfolio ranges from solutions for MicroTCA management through high-performance image processing and various hardware components.
They also offer the integration of complete systems according to customer-specific requirements.
For an overview of offered products, you can click here to find out more.
Support

If you need technical support, you can find information on hardware design templates and PCIe drivers here.
The DESY Zone3 Recommendation is also available for reference.
For further topics and useful tools related to MicroTCA, you'll find information on this page.
You can get started with your hardware design using the provided templates.
The DESY Zone3 Recommendation is a valuable resource for those interested in MicroTCA.
Discover more: At&t Important Information Letter
Featured Images: pexels.com


