DNS Records Hubspot Setup and Configuration Guide

Author

Reads 675

Close-up of ethernet cables connected to a network switch panel in a data center.
Credit: pexels.com, Close-up of ethernet cables connected to a network switch panel in a data center.

Setting up DNS records with HubSpot requires a few key steps. You'll need to create a CNAME record for your domain to point to HubSpot's servers.

HubSpot recommends creating a CNAME record for the root domain (e.g., example.com) and a separate CNAME record for any subdomains (e.g., blog.example.com). This will help ensure your website and subdomains are properly routed to HubSpot.

The CNAME record should be set to the value provided by HubSpot, which is typically in the format of a HubSpot subdomain (e.g., hbsales.example.com).

For example, if you're using HubSpot's sales software, the CNAME record might be set to hbsales.example.com.

Additional reading: Dns Records Example

Troubleshooting DNS Issues

Troubleshooting DNS Issues can be a real challenge, but don't worry, I've got some tips to help you out.

First, let's talk about common DNS issues. If you're unable to connect your domains, check for issues like incorrect DNS records or propagation delays.

Use tools like Whatsmydns to troubleshoot site domains. Navigate to Whatsmydns.net, enter your domain, and select CNAME. If the results don't match the values provided in HubSpot, try updating your DNS record again or reach out to your domain provider.

Credit: youtube.com, How to Set Up DNS Records in HubSpot

You can also use Dig to troubleshoot email sending domains. Enter your host name values provided in HubSpot, and the record Type should be already set to CNAME. If the CNAME records in your Dig results don't match the values provided in HubSpot, update your DNS records again or contact your domain provider.

Some common setup issues include SPF Record Not Authenticating, which can be caused by tiny syntax errors in the TXT record. Make sure your SPF record reads exactly like this: "v=spf1 include:spf.hubspot.com ~all".

Incorrect CNAME configurations can also cause issues with DKIM keys not verifying correctly. Double-check your CNAME values against those provided by HubSpot to ensure they match exactly.

It's also essential to review your DNS settings to avoid confusing email servers. Remove any irrelevant or outdated entries to ensure smooth email communication.

Here's a quick checklist to help you troubleshoot DNS issues:

  1. Check for common DNS issues like incorrect DNS records or propagation delays.
  2. Use Whatsmydns to verify DNS records and propagation.
  3. Use Dig to troubleshoot email sending domains.
  4. Verify SPF and DKIM configurations.
  5. Review DNS settings to avoid confusing email servers.

By following these steps, you should be able to troubleshoot DNS issues and get your domain up and running smoothly.

Configuring DNS Records

Credit: youtube.com, How to Show DNS Records of a Primary Domain on HubSpot - Quick Tutorial {2025}

To configure DNS records for HubSpot, you need to set up the correct DNS settings, which includes SPF, DKIM, and DMARC records. These records act as a safety net, telling other email servers that your domain is authorized to send emails on your behalf.

SPF ensures that HubSpot is authorized to send emails from your domain. To set up SPF, create a new TXT record in your DNS settings with the values: Type: TXT, Host/Name: @ (or your domain name), Value: v=spf1 include:spf.hubspotemail.net ~all, TTL: Default (or set to 3600 seconds).

DKIM signs your emails with a cryptographic signature to verify authenticity. To set up DKIM, add two new CNAME records in your DNS settings: CNAME 1 and CNAME 2, as instructed by HubSpot.

Here's a summary of the DNS records you need to set up:

After setting up the DNS records, verify them in HubSpot to ensure everything is correct.

Configuring Essentials

Credit: youtube.com, What is DNS? Setup for my domain? MX, CNAME, A Records Explained

Configuring DNS Records is a crucial step in ensuring your email marketing performance through HubSpot. You need to set up the correct DNS records to prevent unauthorized sources from sending emails on your behalf.

To fix this, you need to set up the correct DNS records: SPF (Sender Policy Framework), DKIM (DomainKeys Identified Mail), and DMARC (Domain-based Message Authentication, Reporting, and Conformance).

Implementing these settings significantly enhances your email marketing performance through HubSpot by improving deliverability rates and reducing the risk of your emails being marked as spam.

To set up these records, you need to connect your domain to HubSpot. In the Settings menu, go to the "Domains & URLs" option under the "Website" dropdown below the "Tools" heading.

Once you've connected your domain, HubSpot will generate the SPF, DKIM, and DMARC records you need. You'll also need to update your CNAME records in your DNS provider's dashboard.

Here's a step-by-step guide to updating CNAME records in GoDaddy:

  • Log into your GoDaddy account and locate the existing CNAME record for your subdomain or create a new subdomain.
  • In the Host field, enter the subdomain that you're connecting.
  • In the Points to field, copy the value from the HubSpot setup wizard.
  • Click Save to finish and wait for the DNS provisioning to complete.

You can also update CNAME records in other DNS providers, such as AWS (Route 53), by following these steps:

  • Log into your AWS dashboard
  • click on the Hosted zones option in the left menu
  • In the list of domains, select the domain that you want to edit
  • Enter the subdomain into the Name field.
  • Set the Type to CNAME.
  • Enter the value provided by HubSpot.
  • Click Create or Save Record Set.

Setting Up Your Server

Credit: youtube.com, Mail server DNS records - setup and configuration explained

First, you'll need to set up your server, which is the foundation of your DNS configuration.

Your server will need to be running a DNS service software, such as BIND or PowerDNS, to handle DNS queries.

You can choose to use a cloud-based server or a dedicated server, depending on your needs.

Make sure your server has a static IP address, which is essential for creating reliable DNS records.

In our example, we used a cloud-based server with a static IP address of 192.0.2.1.

This IP address will be used to set up your DNS records, so it's crucial to get it right.

To set up your server, you'll need to configure the DNS service software to listen on port 53, which is the default port for DNS queries.

SPF, DKIM, and DMARC Setup

To add SPF, DKIM, and DMARC records to your DNS provider, log in to your DNS provider (GoDaddy, Cloudflare, Namecheap, Google Domains, etc.) and follow these steps.

Credit: youtube.com, DMARC, DKIM, SPF Configuration in HubSpot | Setup Email Domain Authentication

SPF records tell other email servers which email servers are permitted to send emails on behalf of your domain. Imagine SPF as a gatekeeper—it helps prevent spoofing or phishing attempts by only allowing authorized servers.

To add an SPF record, create a TXT record in your DNS settings that includes HubSpot's sending servers, usually in the format "v=spf1 include:hubspot.com ~all".

DKIM signs your emails with a cryptographic signature to verify authenticity. To add a DKIM record, generate the DKIM key in HubSpot and create a TXT record with the provided content.

DMARC gives email providers guidance on how to handle unauthenticated messages. To set up DMARC, create a TXT record that specifies your policy, usually in the format "v=DMARC1; p=none; rua=mailto:[email protected]".

Here's a summary of the DNS records you'll need to set up:

Implementing these records can significantly improve email deliverability, as emails authenticated with these protocols see up to 99% higher delivery rates compared to unauthenticated emails.

To ensure proper SPF configuration, verify that your SPF record reads exactly like this: "v=spf1 include:hs01._spf.hubspotemail.net -all". This form essentially tells other mail servers that only HubSpot's servers are permitted to send emails on behalf of your domain.

Broaden your view: Nordvpn Dns Servers

Credit: youtube.com, Setup SPF, DKIM & DMARC Records in HubSpot [Updated 2024]

It's essential to maintain updated SPF records, especially since HubSpot often uses subdomains for sending out emails. If your SPF is not set up correctly, your emails risk being flagged as spam.

Common setup issues with SPF, DKIM, and DMARC include syntax errors in the TXT record, incorrect CNAME configurations, and misconfigurations in the destination email address listed in your _dmarc TXT record.

Domain Management

To connect your domain to HubSpot, you'll need to navigate to Settings > Domains and URLs. Click on “Connect a domain” and choose what you want to set up: website, blog, landing pages, or all at once. HubSpot will generate DNS records for you (CNAME, A, and TXT).

In the “Domains” tab, click on the “Connect a Domain” button. This will take you to a dialog box where you can select the “Email Sending” option and click the “Connect” button. If you don't have an email for this domain yet, you can click on the “Don't have a domain yet? find one now” link to search for an available domain.

To find your HubSpot DNS settings, navigate to Settings ⚙️ > Website > Domains & URLs, then click on the Email Sending Domains tab and click Connect Domain if you haven’t already added your sending domain. HubSpot will generate the SPF, DKIM, and DMARC records you need.

Related reading: Email Dns Records

Find Your Settings

Credit: youtube.com, Domain Management Made Simple - Beginner's Guide

To find your DNS settings in HubSpot, navigate to Settings > Website > Domains & URLs.

In the Domains & URLs section, click on the Email Sending Domains tab.

If you haven't already added your sending domain, click Connect Domain to proceed.

HubSpot will generate the necessary SPF, DKIM, and DMARC records for you.

Connect Your Domain

Connecting your domain is a crucial step in setting up your HubSpot account. Go to Settings > Domains and URLs to get started.

You'll see a list of options to connect a domain, including website, blog, landing pages, or all at once. Choose what you want to set up, and HubSpot will generate the necessary DNS records for you.

HubSpot will provide you with CNAME, A, and TXT records. You'll need to update your DNS settings with your DNS provider to complete the connection.

If you're setting up a new email sending domain, you'll need to navigate to the "Domains & URLs" option under the "Website" dropdown. Click on the "Connect a Domain" button to get started.

Credit: youtube.com, How to use A records to connect your domain to a web host

You'll be prompted to choose the "Email Sending" option and click the "Connect" button. If you don't have an email domain yet, you can use the "Find a domain" tool powered by GoDaddy to search for an available domain.

Here's a step-by-step guide to connecting your email sending domain:

1. In the "Domains" tab, click on the "Connect a Domain" button.

2. In the dialog box, click on the "Email Sending" option and click the "Connect" button.

3. HubSpot will autodetect your DNS provider and prompt you to authorize with them.

4. You'll need to log into your DNS provider's website in a separate tab to complete the setup process.

Remember, connecting your domain is a crucial step in setting up your HubSpot account. By following these steps, you'll be able to improve your email deliverability rates and reduce the risk of your emails being marked as spam.

On a similar theme: Google Email Mx Records

What If You Have Multiple Domains or SubDomains?

Credit: youtube.com, How to Manage Domains in cPanel | Multiple Websites and Subdomains

Managing multiple domains or subdomains can be a challenge, but HubSpot makes it easy. You can add subdomains like blog.monsite.com or shop.monsite.com, and the configuration is similar to that of the main domain.

HubSpot centralizes your data and simplifies management, including marketing campaigns. This means you don't have to worry about juggling multiple systems and keeping track of everything manually.

You'll be guided through the process step by step, so you don't have to feel overwhelmed by the technical aspects. HubSpot's user-friendly interface makes it easy to manage even the most complex setups.

TXT and CNAME Records

TXT and CNAME Records are essential for verifying ownership and securing your emails.

You'll need to create a TXT record to store the information needed for verification, as explained in Step I – Create a DMARC Record. This record will help you set up DMARC, which is crucial for email deliverability.

In the "Name" field of your new TXT record, enter your domain name exactly as it appears in your email address. For instance, if your email is [email protected], you would enter "example.com" here.

Credit: youtube.com, What are CNAME records? (and how they compare to DNS A records)

To add a TXT record, follow the instructions in Step II – Add a TXT Record. Remember to double-check for typos; mistakes at this stage can lead to deliverability issues later on.

A TXT record typically looks like this: "v=spf1 include:hs01._spf.hubspotemail.net -all". You can also find examples of TXT records in Step II – Add a TXT Record.

Here are the main types of records you'll need to set up:

  • CNAME: To redirect sub-domains.
  • TXT: To verify ownership and secure your e-mails.

CNAME records are used to redirect sub-domains. To add a CNAME record, follow the instructions in Step B: Add the DKIM Record. You'll need to add two new CNAME records in your DNS settings, which will be used to sign your emails with a cryptographic signature to verify authenticity.

A different take: Add Ns Record to No Www

What Are For?

DNS is like the web's personal assistant, helping to connect domain names to websites. You can think of it as a middleman that gets the job done.

DNS handles three main types of records: CNAME, A records, and TXT. Each record has a specific purpose.

Credit: youtube.com, What exactly is a TXT DNS record? (and how to do a lookup)

CNAME records are used to redirect sub-domains. They're like a forwarding address that says, "Hey, I'm not here, but you can find me at this other address."

A records connect your main domain to an IP address. It's like giving your website a physical address that says, "Hey, I'm located here."

TXT records are used to verify ownership and secure your e-mails. They're like a security badge that says, "Hey, I'm the real deal."

TXT Record

A TXT record is a crucial part of email authentication, and it's essential to get it right. You'll need to create a new TXT record in your DNS settings, specifying the host or name as your domain name.

To add a TXT record, you'll need to enter the correct values, including the type, host or name, value, and TTL (time to live). The value for HubSpot's SPF record is v=spf1 include:spf.hubspotemail.net ~all. If you already have an SPF record, merge HubSpot's SPF with your existing record instead of adding a second one.

Credit: youtube.com, How to Add DNS Records - A, CNAME, TXT, Nameservers on Godaddy Domain

The name field of your new TXT record should match your domain name exactly as it appears in your email address. For example, if your email is [email protected], you would enter "example.com" here.

You can paste the specific SPF record for HubSpot into the value field: v=spf1 include:hs01._spf.hubspotemail.net -all. This tells other mail servers that only HubSpot's servers are permitted to send emails on behalf of your domain.

Here's a summary of the required fields for a TXT record:

It's essential to double-check for typos in your TXT record, as mistakes can lead to deliverability issues later on.

III CNAME

CNAME records are used to verify the authenticity of your emails by adding a cryptographic signature. To add a CNAME record, you'll need to create two new CNAME records in your DNS settings, as instructed by HubSpot.

These records will typically include the hostnames and values you need to input, so it's essential to take note of the information provided by HubSpot. Log into your DNS provider's portal to add the CNAME records exactly as shown.

Credit: youtube.com, CNAME Records Explained

You can update CNAME records in various DNS providers, including GoDaddy, Cloudflare, and AWS (Route 53). The process typically involves logging into your account, selecting the website or domain you want to update, and then adding a new CNAME record with the required subdomain information.

Here's a brief overview of the steps involved in updating CNAME records in different DNS providers:

Email Authentication

Email authentication is a crucial aspect of maintaining credibility and protecting your brand from being associated with spam. Regularly monitoring your SPF, DKIM, and DMARC configurations can provide peace of mind and catch any issues before they affect deliverability.

Implementing SPF, DMARC, and DKIM for email authentication can significantly enhance your email marketing performance through HubSpot by improving deliverability rates and reducing the risk of your emails being marked as spam.

Businesses can see a 20% increase in open rates when these protocols are correctly configured. Emails with proper authentication are more likely to land in the inbox.

Credit: youtube.com, Verifying Primary and Email Sending Domains in HubSpot (DKIM,DMARC,SPF)

The authentication process is available to any HubSpot user on the Marketing, Sales, Service, or CMS Hub at a Starter, Professional, or Enterprise level. This process will differ from one DNS provider to the next.

You can review your DNS record authentication in your HubSpot portal by going to Settings and clicking on Domains & URLs under the “Website” dropdown under the “Tools” header in the left menu bar. The “Email sending domains” section of the “Domains” tab will show you the status of your authentication for all email sending domains you’re using.

Here's a quick step-by-step guide to help you authenticate your email domains:

  • In HubSpot, navigate to Settings ⚙️ > Website > Domains & URLs.
  • Click on the Email Sending Domains tab.
  • Click Connect Domain if you haven’t already added your sending domain.
  • HubSpot will generate the SPF, DKIM, and DMARC records you need.

It can take up to 80 minutes for HubSpot to verify that DNS records are set up correctly.

Setting Up Email Sending Domains

To set up email sending domains in HubSpot, start by navigating to Settings ⚙️ > Website > Domains & URLs. From there, click on the Email Sending Domains tab and click Connect Domain if you haven’t already added your sending domain.

Credit: youtube.com, How to connect email sending domains in HubSpot.

HubSpot will generate the SPF, DKIM, and DMARC records you need for email authentication. These records help improve deliverability rates and reduce the risk of your emails being marked as spam.

You can connect your domain to HubSpot by going to Settings > Domains and URLs, then clicking on “Connect a domain” and choosing what you want to set up. HubSpot will generate DNS records for you (CNAME, A and TXT).

The authentication process is available to any HubSpot user on the Marketing, Sales, Service, or CMS Hub at a Starter, Professional, or Enterprise level. However, the process may differ from one DNS provider to the next.

Here are the steps to connect a new email sending domain in HubSpot:

1. Go to Settings > Domains & URLs

2. Click on the “Connect a Domain” button

3. Choose the email sending option and click “Connect”

4. If you don’t have an email for this yet, click on the “Don’t have a domain yet? find one now” link to search for an available domain you can purchase.

Note that it can take up to 80 minutes for HubSpot to verify that DNS records are set up correctly.

DKIM and DMARC Configuration

Credit: youtube.com, How to Set Up SPF, DKIM & DMARC in HubSpot (Step-by-Step Guide)

To configure DKIM, you need to add two new CNAME records in your DNS settings. This will sign your emails with a cryptographic signature to verify authenticity.

DKIM signs your emails with a cryptographic signature to verify authenticity. It's an essential step in ensuring your emails maintain their integrity and reach your recipients' inboxes.

To set up DKIM, you need to generate DKIM keys in HubSpot. This will provide you with two unique DKIM keys that you'll need to add to your DNS records.

HubSpot will provide you with two unique DKIM keys that you'll need to add to your DNS records. These keys create a digital signature for outgoing emails associated with that domain.

To add DKIM records, you need to add a TXT record in your Domain Name System (DNS). This stores the information needed for verification.

Here's a step-by-step guide to adding DKIM records:

  • Generate DKIM keys in HubSpot
  • Add two new CNAME records in your DNS settings
  • Add a TXT record with the provided content

Implementing DKIM can significantly improve email deliverability. According to statistics, emails authenticated with DKIM see up to 99% higher delivery rates compared to unauthenticated emails.

Credit: youtube.com, SendPulse DMARC, DKIM, SPF - Configuring DNS Records

To set up DMARC, you need to create a new TXT record in your DNS. This will specify your policy and help email providers determine how to handle unauthenticated messages.

DMARC gives email providers guidance on how to handle unauthenticated messages. It's an essential step in ensuring your emails reach your recipients' inboxes.

Here's a brief summary of the DMARC record:

By configuring DKIM and DMARC, you can significantly improve email deliverability and ensure your messages reach your recipients' inboxes.

Monitoring and Maintenance

Monitoring your DNS records is a continuous process that requires regular attention. Saving changes in your DNS settings is just the beginning, as monitoring reports sent to your specified email address is vital to evaluate your implementation's performance.

These reports help identify any unauthorized access or strange activity related to your domain, allowing you to make adjustments as needed. Regularly reviewing these reports will further fortify your defenses against email spoofing or phishing attempts.

Proactive monitoring with HubSpot's built-in tools can prevent delivery hiccups and impact your sender reputation. You'll receive alerts right away when an issue occurs, such as a misconfigured DNS record.

Check Your Status

Credit: youtube.com, Home Lab Monitoring Made Easy: Uptime Kuma Tutorial

Checking your status is crucial for a smooth email sending experience. You want to ensure that your DNS records are updated correctly in both HubSpot and your domain host.

Regular monitoring is a good practice to adopt. This helps prevent delivery hiccups and keeps your sender reputation intact.

Think of it like checking your car's oil before a long road trip. By keeping an eye on the finer details, you prevent larger problems down the line.

To check the status of your records, start by logging in to your HubSpot account. Click the settings icon in the top navigation bar and navigate to Content > Domains & URLs.

Verify that the DNS records have been updated in HubSpot and in your domain host. If HubSpot cannot connect your domain, a banner will appear above the DNS records table.

You should also check the status of your DNS records in your domain host. Log in to your DNS host and confirm that the CNAME records match the Host(name) and Values provided by HubSpot during the connection process.

A modern data center featuring a computer setup with monitor and keyboard, emphasizing technology infrastructure.
Credit: pexels.com, A modern data center featuring a computer setup with monitor and keyboard, emphasizing technology infrastructure.

Here are the error types you might encounter:

If you've confirmed that your DNS records have been updated correctly, you can click either Refresh or check them again in the domain setup within HubSpot to confirm your records have been updated and your domain can be connected.

Save and Monitor

Saving your DNS settings is just the beginning. You've got to keep an eye on those reports sent to your specified email address, like [email protected].

Monitoring is vital, as it helps evaluate how well your implementation is performing and if there are adjustments needed. Regularly reviewing those reports will further fortify your defenses against email spoofing or phishing attempts.

You don't want to wait until a problem arises to check on your email configurations. This proactive approach prevents delivery hiccups, which could impact your sender reputation adversely.

Think of it like checking your car's oil before a long road trip. By keeping an eye on the finer details, you prevent larger problems down the line.

Keeping track of your email authentication status helps maintain credibility. Regularly monitoring your SPF, DKIM, and DMARC configurations can provide peace of mind, enabling you to catch any issues before they affect deliverability.

Frequently Asked Questions

What are the 8 DNS records?

There are 8 main types of DNS records: A, CNAME, AAAA, PTR, MX, NS, SRV, and TXT records, each serving a unique purpose in mapping domain names to IP addresses and routing internet traffic. Understanding these records is essential for managing and troubleshooting domain name systems.

Mona Renner

Senior Copy Editor

Mona Renner is a meticulous and detail-driven Copy Editor with a passion for refining complex concepts into clear and concise language. With a keen eye for grammar and syntax, she has honed her skills in editing articles across a range of technical topics, including Google Drive APIs. Her expertise lies in distilling technical jargon into accessible and engaging content that resonates with diverse audiences.

Love What You Read? Stay Updated!

Join our community for insights, tips, and more.