How to Make Ice Cream in the Ninja Blender?

Author Cory Hayashi

Posted Dec 10, 2022

Reads 38

Circuit board close-up

If you are looking for a creative way to make delicious ice cream at home, look no further than your very own Ninja blender! With its powerful blade and auto-iQ intelligence, the Ninja blender can make incredibly smooth and creamy ice cream in minutes. Plus, you won’t need any special tools – just your trusty Ninja blender!

To start off, let’s gather the ingredients. You will need one can of sweetened condensed milk, two cups of heavy whipping cream (or half-and-half), one teaspoon of vanilla extract and a pinch of salt. These four ingredients are all you need to make tasty homemade ice cream.

Now it’s time to blend! Begin by combining the heavy whipping cream (or half-and-half) with the condensed milk into the jug or pitcher that came with your Ninja blender. Securely attach the lid and insert a sharp blade from your ninja set. Next up is adding in our flavorings such as 1 teaspoon of vanilla extract and pinch of salt – or whatever else flavorings you prefer! Now turn on your machine for about 30 seconds until everything is well mixed together into a smooth mixture.

Once all contents have been blended properly together turn off motor strength settings and bring out an extra large bowl before pouring out mixtures from jug/pitcher carefully over bowl – it helps if this bowl was placed inside freezer ahead time so that icy cold sensation would be present while stirring plus spooning servings afterwards without clumping up like usual normal substances do otherwise even with multiple removals coming back each time soon thereafter making cleanup job easier too surely thus part there =).

At last put contents down inside deep freezer checking again occasionally over next 4+ hours; then serve mixture according thereto onto cone or cup whatever preferred choice desired...Enjoy with family & friends alike essentially creating perfect dessert treat during those hot summer days too ha haa~

How to make milkshakes in the Ninja blender?

If you’re looking to make milkshakes in your Ninja blender, you’re perfectly in luck! Making milkshakes with a Ninja Blender is quite simple and easy, plus it guarantees smooth, creamy results.

Here are a few easy steps to help you make delicious milkshakes with your Ninja within minutes:.

1) Add the ingredients – Start by pouring 1 cup of ice into the blender cup then add ½ cup of milk. If necessary adjust the amount of liquid (milk or water) for desired consistency. Add two heaping scoops/scoops of your favorite ice cream flavor and mix until smooth.

2) Blend – Place lid on blender and set it on Pulse mode for better circulation and blending. You can also adjust settings if needed to ensure all ingredients have been thoroughly mixed together; aim for at least 20 seconds-30 seconds of Pulse time or Pulse setting depending on texture preference. Once finished pulsing, make sure the entire mixture has blended together nicely before continuing with next step. Lastly, add any additional extras such as chocolate powder or flavored syrup before moving onto blending once more (if necessary).

3) Enjoy! - After ensuring that everything is blended together well after pulse times have run their course—then all that's left is enjoying that freshly made milkshake! Pour into glasses and serve cold; enjoy an extra creamy result from a properly blended mix in no time flat thanks to your trusty Ninja Blender!

How to use the Ninja blender to make frozen smoothies?

Blending smoothies has never been easier with the powerful and versatile Ninja blender. Creating a delicious, frozen smoothie requires just a few simple steps.

First, you’ll need to assemble your ingredients: fresh or frozen fruit (keeping fresh fruit chilled in the refrigerator before getting started helps it blend better). Also consider adding yogurt or nut butters for additional flavor and protein, or healthful additions like ginger, spirulina powder, kale almond milk and oatmeal.

Now you're ready to get blending! Place all of your ingredients into the blender pitcher-and if freezing your ingredients ahead of time-add them while they are still partially frozen so they can be chopped quickly and easily. If using fresh fruits that may contain high amounts of liquid such as melons or citrus fruits add a cup of ice per serving to achieve a thick consistency. Tomato based liquids can also be added for flavor and color as well as greens such as spinach to boost nutrient density!

Next select the desired speed setting; for ideal results use high speed first to pulverize your ingredients then switch down low until desired level of thickness is reached. This should take no more than 45 seconds since Ninja blenders are designed with centuries-old blade technology that spins at an incredibly fast rate creating delicious texture from start to finish - perfect for smoothies! Once blended mix up inside of blender pitcher by gently stirring with lid on top making sure to ensure there are no chunks left behind before pouring into glasses for serving up on its own or over ice if desired. Enjoy!

What ingredients are needed to make ice cream in the Ninja blender?

If you're looking to bring homemade ice cream into your dessert repertoire, consider the Ninja blender! The powerful kitchen appliance can be used to make a variety of delicious recipes, including tasty and creamy ice cream. All you need are a few simple ingredients and some patience – it's worth the wait! Here is a breakdown of what you need for making ice cream in your Ninja blender:

- Ice Cream Base: This part of your recipe serves as a foundation for your concoctions. You'll need heavy cream or heavy whipping cream (1 ½ cup) and whole milk (1 cup).

- Sweetener: For sweetness you can use either granulated sugar or corn syrup (¾ cup). Consider adding more if desired.

- Flavoring & Enhancers:These will give your homemade creation an extra oomph and can range from vanilla extract to coffee extract, as well as chocolate chips, chopped nuts, candies or any other flavors that pique your interest!

After gathering all the necessary ingredients above, place them into the bowl of the Ninja blender along with 4 cups of crushed ice. Turn on the “smoothie” mode setting and blend until smooth. Enjoy this freshly made dessert treat with friends or family members!

How do I adjust the settings on the Ninja blender to make ice cream?

If you're looking to make homemade ice cream with your Ninja blender, there are a few things to keep in mind when adjusting the settings.

First, you'll need the right ingredients that will help your ice cream turn out thick and creamy. Most recipes call for cream, milk, sugar, and flavoring like extracts or purees. Make sure to use high-quality ingredients to get the best results.

For most ice creams made in a Ninja blender, it's best to use one of the higher speeds on the machine. This helps incorporate air into your mixture as it whips up so that it comes out light and fluffy instead of dense or chunky. Depending on what type of ice cream you're making, you may need less speed than other recipes—again make sure to check specific recipe instructions before starting!

The last setting adjustment that's needed is using their pulse function. This chopped up any large pieces of fruit or nuts if they were included in the mix. Use several short pulses on a low speed setting rather than one long pulse at high speeds—we don't want any frozen chunks lingering in our creamy concoction!

Once you've carefully adjusted all of these settings according to specific recipe directions and chosen ingredients you can now start blending until everything is just perfect! Enjoy your homemade treats from fresh from your new Ninja blender–their professional quality blades guarantee delicious results every time!

How long does it take to make ice cream in the Ninja blender?

Making ice cream in a Ninja blender is one of the fastest ways to make a home-made, delicious treat. It takes about four minutes total for you to make your own ice cream – just the right amount of time for a quick dessert after dinner.

When it comes to making ice cream in your Ninja blender, there are three simple steps: freezing, blending and folding. You’ll need frozen fruit or other ingredients like chocolate chips and nuts as well as heavy whipping cream (or dairy-free alternatives) and sweetener such as honey or sugar.

Start by freezing the chosen ingredients overnight or until they are firm enough so that they can be blended without turning into mush. Place all of the frozen ingredients into the Ninja blender jar prior to blending them together until combined. It may take around 30 seconds on medium speed with scraping down the sides occasionally in order to get all chunks blended together smoothly.

After you’ve achieved your desired ice cream consistency – soft serve style– it’s time for folding! Folding will help evenly distribute any toppings such as peanut butter cups, oreo cookies, homemade cookie dough bites etc.. Fold them in gently with an rubber spatula before transferring mixture onto parchment paper covered baking sheets and placing them in freezer for at least two hours or overnight if desired firmer texture is wanted. Now its ready to enjoy!

So how long does it take? From start till finish - about 4 minutes (plus 2 hours if deciding firmer texture). You'll be able create wonderfully creamy homemade ice creams with little effort again and again thanks to your trusty ninja blender!

What type of recipes can I make with the Ninja blender to make ice cream?

Many people don't realize that their Ninja Blender can make delicious homemade ice cream just as easily as it blends smoothies, milkshakes, and other frozen treats. Making ice cream in a Ninja Blender is a great way to save time and expenses since you no longer have to purchase an expensive appliance that takes up extra counter space just for making ice cream. All you need is your blender and a few simple ingredients!

The Ninja blender is perfect for creating delicious homemade treats like frozen custard, sherbet, gelato, or frozen yogurt. For any of these recipes you'll need whole fat milk or heavy cream combined with sweetener of choice (sugar or agave nectar work best). You should also add some salt while making sweetened flavors; however omit any added salt if making unsweetened ice creams. You'll then place the ingredients into your Ninja Blender and blend until smooth! Depending on the recipe you're using, some additional ingredients such as fruit purees may be incorporated at this time.

Finally pour the blended mixture into a freezer-safe container and store it in the freezer for several hours until desired texture is reached - usually about four to six hours total depending on coldness of your freezer. It's best when checking on the progress every hour or so to break up large chunks with a fork since over-mixed blends can become hard instead of creamy after freezing for extended periods of time - diluting flavorful elements over time too if left unchecked! That's all there is to it - in no time at all you'll have delicious homemade ice creams completely made from scratch right in your own kitchen with nothing more than an awesome Ninja blender!

Cory Hayashi

Cory Hayashi

Writer at Go2Share

View Cory's Profile

Cory Hayashi is a writer with a passion for technology and innovation. He started his career as a software developer and quickly became interested in the intersection of tech and society. His writing explores how emerging technologies impact our lives, from the way we work to the way we communicate.

View Cory's Profile