Where Is the Refrigerator Air Filter Located?

Author Bessie Fanetti

Posted Jan 10, 2023

Reads 26

Circuit board close-up

When it comes to refrigerator air filters, the first question homeowners often have is “where is it located?” Knowing where your refrigerator air filter is located can help you regularly clean and maintain it to keep your fridge working properly and efficiently. Fortunately, the majority of refrigerators have an easily accessible filter that takes just a few minutes to change.

For most refrigerators, the air filter is located near the grille at the bottom of the unit. To find it, simply remove the grille either by unlatching it from the bottom or pulling it straight out from its hinge at the top. After removing the grill, you should be able to locate both your refrigerator’s condenser coils and its air filter. The air filter square should be attached towards the back of your fridge.

In some newer refrigerator models however, you may not actually see an air filter beneath your grille when looking for it because they are hidden in hard-to-reach parts of your fridge. This could be in a back corner near some evaporator coils or behind shelves within your refrigerator itself. It may take a bit more work if you have an older model fridge or one with this kind of arrangement but they will usually have a designated space marked where you can easily locate and access your refrigerator’s air filters.

It can be helpful to clean and replace your refrigerator's air filters every three to six months depending on usage and any issues that might arise along the way in order to maximize energy efficiency and optimize cooling performance while also reducing cross-contamination through bacteria growth in food products inside your appliance from unclean filters and vents over-time. With just a couple quick steps mentioned above, finding an easy access point for cleaning and replacing those important filters means maintaining a healthy environment for all those delicious things stored inside our refrigerators!

How often should I replace my refrigerator air filter?

Most people tend to overlook their refrigerator air filter, but it needs to be replaced every 6 months or so in order to keep your fridge running optimally. Replacing the filter is important as a worn and clogged filter can significantly decrease the efficiency of your appliance and lead to higher energy bills.

To establish a proper maintenance routine, consider marking each filter replacement on your calendar. Also, take time to clean the interior of your fridge out at least once a month. This reduces the buildup of moisture that would impede air flow through the unit. Pay attention for any kind of unpleasant odors emanating from food leftovers, as this can quickly spread throughout the entire appliance if gone unchecked.

Taking the time to replace and care for your refrigerator air filter will help ensure that it runs correctly and efficiently for years to come. Keeping an eye on its condition avoids unpleasant surprises like when you hear strange rattling or loud noises; these are signs that something is seriously off kilter with your device! Make sure to check in with maintenance professionals for additional upkeep advice if needed!

What type of air filter do I need for my refrigerator?

Having the right air filter for your refrigerator is essential in keeping food tasting fresher and lasting longer. Luckily, choosing an air filter can be quite simple.

First, find the make and model of your refrigerator. Your refrigerator will usually have a model number on the inside left-hand wall, working from the back of the fridge towards the shelves. With this information in hand, you can easily buy a filter for your specific brand.

When shopping for a filter for your fridge, there are several factors to consider. Filters vary in terms of capacity (the amount of air it can cleanse) as well as filter type (charcoal-based or electrically activated). Your manufacturer may also suggest using a specific filter with their refrigerator, so always double-check before purchasing any others. Additionally, there are filters made to last up to six months while others can be used up to twelve months or more between changes. Be mindful of how often you need to change your filters depending on how regularly you use it and how many people inhabit your home; otherwise you might end up running out too quickly!

No matter what kind of filter you choose, it is important that you check it monthly and change promptly if needed—this will ensure that your refrigerator will continue functioning optimally and all food stored inside will always be kept fresh!

Which side of my refrigerator do I find the air filter?

If you’re having trouble finding the air filter on your refrigerator, you’re not alone. Fortunately, there are a few tricks to help you locate it quickly and easily.

Most air filters in modern refrigerators are located behind grilles at the base of the appliance, near the bottom and towards the back. The grilles may be tricky to identify since they often appear as plastic and sometimes blend into the fridge’s background. When attempting to locate them, look for slanted lines that indicate a grille or sometimes a triangle pattern. If the grilles cannot be seen because of their location against a wall or obstruction, you may need to remove items from around your refrigerator to be able to easily see them.

Once you have located the grilles, your refrigerator will usually have either a grease filter or an activated charcoal filter located behind them. The grease filter is usually on the left side of the fridge, but this can vary depending on model and manufacturer so it’s best to always double check with your user manual for clarification. If your fridge contains an activated charcoal filter it will typically be found on either side or just below where the fan is located in front of the cooling coils.

Knowing exactly where your air filter is located can save you time and energy when it comes time for cleaning or replacement--so no matter which side of your refrigerator holds it's air filter will depend on what model and manufacturer you have, but following these helpful steps should help lead you in right direction!

What is the best way to clean my refrigerator air filter?

It is important to clean your refrigerator air filter regularly to prevent dust accumulation and better maintain its air quality. The best way to do this is by removing the filter and running it under warm water with a small amount of dish soap. Once the dirt and debris have been dislodged, rinse the filter thoroughly with water, making sure all the detergent has been washed away. Leave the filter to dry fully before replacing it in the refrigerator.

If you want a more thorough clean than just a rinse, consider soaking your air filter in hot boiling water. You can do this on an as-needed basis, every few weeks or months based on how frequently you use your fridge. Boiling your filter can remove any airborne pathogens that may have found their way onto it – such as germs or bacteria – making it safer to use over time. Allowing the air filter to dry completely before replacing it should be done in order for the machine to function properly.

It's also important to examine your refrigerator filters periodically for any signs of damage or wear-and-tear that could lead to malfunctioning machines, especially if you live in an area with a higher dust concentration. Visual inspections can help you identify clogged and dirty filters which may require more extensive cleaning or even replacement altogether. If maintained correctly, replacing and cleaning your filters regularly should be enough to ensure that they are working optimally and providing clean air circulation for years ahead.

Is it necessary to change the air filter in my refrigerator regularly?

Many people make the mistake of assuming that simply changing the air filter in their refrigerator periodically is enough to fend off dust, dirt, and other pollutants from entering their refrigerator. Unfortunately, this may not be the complete solution for the health and safety of your family and your food.

It is important to regularly change your refrigerator's air filter because dust gathers inside your refrigerator continuously. Even if the outside of your refrigerator looks clean, dust can still settle within its internal parts and get passed through the air filter if it’s clogged up. Additionally, keeping the air filter clean will increase air flow which can help to decrease energy consumption.

You shouldn’t wait too long before replacing a clogged air filter either as this can significantly reduce airflow. This can result in an inefficient use of energy which adds up over time and increases utility bills. It’s best practice to check your fridge's manual for manufacturer recommended maintenance schedules, but generally it is suggested that an air filter should be changed every three months or so.

Therefore, it is absolutely necessary to change the air filter in your refrigerator regularly if you want to maintain a wholesome environment with optimal cooling efficiency.

Are the air filters of all refrigerators located in the same place?

Air filters in refrigerators can certainly be located anywhere within the appliance, depending on model and make. While most homeowners are only familiar with the standard top-of-the-fridge filter configuration, the truth is that manufacturers have several options when it comes to positioning of the air filter system. Since an open fridge enables cold air to flow out, this can cost more energy when running and so some brands pay special attention to location areas for their air filters. It is not unheard of for a manufacturer to place their air filter inside the back wall.

The LG air filter is typically located behind a pull-out panel in the top right hand corner of the refrigerator interior. The panel has a label warning sign that reads ‘Hinge cover holds filter." Some French door models have an additional filter which can be found in between the two doors and needs to be manually replaced every 6 months or so.

Finally, most generic filters used to replace factory original models are typically installed above or below removable shelves; these shelves then act as an access point for installing or replacing a new one. To ensure your air filters are working optimally it’s important to check; regardless of how often depends on how much you use your refrigerator and how big it is. The bottom line is that if your fridge does not seem to be cooling properly, checking the locations of all its air filters might be a good start towards getting it back running efficiently again.

Bessie Fanetti

Bessie Fanetti

Writer at Go2Share

View Bessie's Profile

Bessie Fanetti is an avid traveler and food enthusiast, with a passion for exploring new cultures and cuisines. She has visited over 25 countries and counting, always on the lookout for hidden gems and local favorites. In addition to her love of travel, Bessie is also a seasoned marketer with over 20 years of experience in branding and advertising.

View Bessie's Profile