What Size Shocks for a 3 Inch Lift?

Author Cory Hayashi

Posted Nov 20, 2022

Reads 38

Circuit board close-up

When it comes to selecting a set of shocks for a 3-inch lift, the options can be overwhelming. There are many types and sizes of shocks that can be used for a 3-inch lift, however, choosing the right ones is an important part of creating a safe and durable lifted setup.

In general, if you have lifted your vehicle by three inches then you need shocks that are capable of handling being elevated by this amount. This means selecting shocks with shock bodies that measure at least 12” tall in order to ensure they can provide enough resistance to keep your vehicle's suspension firmly in position while traversing off road trails or any other terrain with varying degrees of unevenness. Additionally, shorter body lengths will have difficulty handling these types of conditions without over compressing, potentially resulting in damage both to the shocks as well as suspension components like control arms and springs.

It’s also important to choose appropriately sized springs for your 3 inch lift. If you go too small on the spring rates then your vehicle won't achieve sufficient ride height from the shock alone; which could result in bottoming out or inconsistent contact patch when extraordinary conditions are encountered on-trail—causing loss of traction at worse case scenarios—and potentially damaging rocker panels or other parts due to continuously scraping over rocky terrain even at low speed driving conditions. Last but not least don’t forget about warranty considerations though some shock manufacturers may restrict their warranties if they detect that incorrect size springs were installed on them so make sure double check with each company before installing them!

At the end of it all keeping off road durability and comfort in mind is key when choosing what size shocks for a 3 inch lift since most aftermarket setups lack some level adjustable tuning capability directly within the shock its self though subtle changes within damper beyond what basic settings (i.e.. Rebound & Compression) offer can still be made depending upon spring rate selected combined with corresponding support hard parts such as sway bars links -all ultimately serving towards achieving preferable outcome after installation would be complete!

What size wheels and tires should I use with a 3 inch lift?

If you’ve recently installed a 3 inch lift for your vehicle, the next step is figuring out what size wheels and tires to use. The good news is that generally speaking, with a 3 inch lift it will give you enough clearance to use almost any wheel and tire combination.

To help determine what will work best for your individual setup though, there are just a few basic guidelines that it is important to consider. Firstly, when choosing the wheels determine their offset in relation to the center line of the wheel hub which can be found by measuring its backspacing or looking up specs online. For example, with a positive offset closer to 12mm-15mm will maximize appropriate spacing for most aftermarket rims and tires which ensures you have enough room between the wheel well fender and suspension components such as control arms and sway bars.

Along with this comes tire selection; aim for something in the 33x12x20 size range if possible as this tends to be one of the more popular combinations after installing a three-inch lift kit on most trucks or larger SUVs This size provides optimal performance on both pavement or off-road settings without sacrificing too much responsiveness since their slightly smaller sidewall will provide more stability overall when going through turns quickly or rough terrain alike. Be sure at minimum that your sidewalls are rated 10ply as this means they can better stand up against punctures due to rocks and other obstacles while driving off road settings too.

All in all getting exactly what size wheels & tires work best with any given vehicle setup may seem intimidating at first but following these simple guidelines should make it much easier when making your selection!

What type of coilovers are recommended for a 3 inch lift?

When it comes to lifting your vehicle, there is no one-size-fits-all option. The type of coilovers that are right for a 3 inch lift will depend on the make and model of your vehicle, as well as factors such as drivability, ride quality and offroad performance.

If you're looking to raise the suspension height of your car but still want everyday good drivability, it's generally recommended to choose coilovers which are stronger than stock spring rates. This ensures that they will be better at handling body roll while cornering and prevent them from bottoming out under hard braking or acceleration. A set of adjustable coilovers would also be advantageous in this scenario because you can tune the stiffness according to what you need for a comfortable ride without sacrificing too much handling ability or cornering grip.

For those who plan on using their vehicles primarily offroad or with heavier loads in tow, a stiffer setup is necessary since greater shock absorption is needed amid bumps and uneven terrain – this means choosing higher spring rates than typically seen with an overall 3 inch lift. It's normally suggested that these heavier duty applications should include either extended travel shocks or longer/stronger shocks combined with an external reservoir for proper dampening adjustment depending on terrain changes.

Ultimately, whether driving around town or headed up mountainside trails – selecting the right coilover setup can make all the difference so invest in quality aftermarket parts and remember to research options according to your specific needs!

What length suspension arms should be used with a 3 inch lift?

When it comes to lifting your vehicle, understanding the right suspension arm length can be critical. So if you have a 3 inch lift, what length of arms should you be using?

The majority of after market suspensions that provide 3 inches of additional ride height will come with two required lengths for the suspension arms. The first set of arms is known as OEM (Original Equipment Manufacturer) arms and are generally the same length as from stock. These are suitable for most day-to-day driving and general use applications, especially when you’re not going offroad or running increased spring rates in the suspension.

The second set depends on how much travel you plan on having with your offroading/rock crawling adventures! As a general rule it’s recommended that extending your front upper control arm by 2” will increase travel by at least 1” compared to the stock arm length. For example, if using a 3-inch lift kit then those longer control arms should ideally measure in at 5 inches longer than their factory counterparts; this provides an extra 2 inches of extended travel when airing out your truck along trails or taking jumps only daredevils attempt!

Of course, professional advice should also factor into your decision as some lifts potentially require custom length control arm depending on specific vehicles make/models due to axle angle changes or other details like drivetrain components involved - so always consult with experts who sell specific products before making any purchase decisions!

How much longer of shock absorbers are needed for a 3 inch lift?

If you’re looking to add a 3-inch lift to your vehicle, chances are you’re going to want the proper amount of shock absorbers needed for the job. The number of shock absorbers needed will depend largely on the type of suspension system your vehicle has, such as a leaf spring layout or coilover design.

For most vehicles with a leaf-spring setup, such as many pickup trucks and SUVs, an additional pair of extended shock absorbers may be required for a 3-inch lift. This is because extending the shocks too much can cause them to bottom out easily, especially when taking off-roading hits. If your vehicle uses coilover springs instead, then it’s likely that only one extended shock absorber per wheel is required for each corner due to their extensive range of height adjustment capabilities.

The amount of additional length required in an extended shock absorber depends upon the intended overall ride height increase during use and the intended application (off roading or casual street driving). Generally speaking though, 1" - 2" more than stock length should be sufficient enough when looking at lifts up to 3 inches tall. It’s important then that your selected shocks are rated with more travel than necessary so you have some extra room in case they start bottoming out occasionally during use when you hit deeper dips in terrain - as this is typically only an issue with larger lifts over 4 inches tall or so without further suspension upgrades / modifications present from factory standard builds like flipped axle setups.

Ultimately if uncertain it’s best to consult with a reputable automotive shop or specialized parts supplier who can provide custom advice tailored specifically towards your intended needs and vehicle specifications. With professional guidance behind you any worries about not having enough or too much lift from shocks should clear up quickly!

What are the spacers and bump stops needed for a 3 inch lift?

If you're looking to install a 3 inch lift on your vehicle's suspension, it's important to understand the components needed. Spacers and bump stops are absolutely essential for safely raising your ride.

Spacers can help offset the amount of pre-load on your shocks, as well as raise the center of gravity of your vehicle which affects how it handles off-road terrain. They can be made from a variety of materials such as steel or aluminum and are designed to fit around existing hardware like shock absorbers and steering dampers so that they can bolt in place without drilling any holes or making drastic modifications.

Bump stops, on the other hand, are designed to protect critical suspension parts like control arms and sway bars from damage by preventing them from bottoming out when exposed to an excess of shock load over an uneven surface. This cushioning effect allows the driver more control over their ride even when driving over rough terrains since it prevents sudden jerking motions created by contact with hard objects beneath the wheels. Bump stops should be adjusted according to your specific needs, but they typically come in two varieties: standard bump stop with a rubber cap or an adjustable type featuring multiple layers which can be burrowed down when needed for extra protection against damage caused by hard landings.

By taking into account spacers and bump stops when installing a 3 inch lift you ensure not only improved performance but also assure that each component is doing its job correctly for increased safety while driving off-road terrain.

What brands of shock absorbers are most compatible with a 3 inch lift?

Shock absorbers are essential for improving the performance and efficiency of your vehicle’s suspension system. If you recently lifted your vehicle by three inches, then you probably have noticed that its off-road capabilities and responsiveness have markedly improved. However, to ensure that you get the most out of your lift, it is important to choose a brand of shock absorber that is compatible with your new setup.

There are plenty of brands to choose from on the market however the ones most compatible with a 3 inch lift include Rancho RS9000XL, Skyjacker Softride Gas Monotube Shock Absorber & Strut Assembly, Billstein 5100 Series Shocks and Monroe Max-Air Shocks & Struts.

The Rancho RS9000XL shocks provide maximum suspension performance while also allowing for easy adjustability on more rugged terrain. They feature rebound adjustable velocities which give drivers greater control over their off-roading experience by allowing them to tune it in accordance with their exact driving needs. The closer velocity damping design improves manoeuvrability and traction without sacrificing ride comfort when travelling at higher speeds or turning sharply around corners.

Skyjacker's Softride Gas Monotube Shock Absorbers & Strut Assembly use advanced nitrogen gas charged technology ensuring that they remain rigid in harsh environmental conditions like mud or snow as well as providing superior ride comfort when compared to other brands on the market specifically designed for lifts up to three inches or more in height. The polyurethane bushings also help reduce road noise as well as improve longevity so drivers can enjoy not just long lasting peace of mind but more importantly smoother rides no matter what kind of surface they’re taking their vehicles onto next!

Then there are Bilstein 5100 Series Shocks which offer perfectly balanced off-road performance thanks to its nine stages adjustable rebound force setting allowing drivers greater flexibility so they can tune this particular shock absorber set depending on where they want their suspensions stiffness set: light if they wish an ultra smooth ride; heavy if they wish firmer handling around curves; or somewhere in between depending how much stability/comfort/efficiency tradeoff preference during any given drive! Last but certainly not least we have Monroe Max-Air Shocks & Struts providing excellent heavy duty load carrying capacity and support even under extreme loads over rough terrain without compromising tire grip or requiring frequent adjustments for optimal functioning within different operating conditions throughout any journey regardless if its roadside asphalt slaloms through city streets; backroads dirt paths weaving through countryside hillsides; etcetera...

Cory Hayashi

Cory Hayashi

Writer at Go2Share

View Cory's Profile

Cory Hayashi is a writer with a passion for technology and innovation. He started his career as a software developer and quickly became interested in the intersection of tech and society. His writing explores how emerging technologies impact our lives, from the way we work to the way we communicate.

View Cory's Profile