
RTL SDR technology has made it possible to tap into a wide range of radio frequencies using a small USB stick and some free software.
The RTL-2832U chip, found in most RTL SDR devices, is the key to this technology, allowing users to receive a wide range of frequencies from 24 MHz to 1850 MHz.
You can get started with RTL SDR for under $20, thanks to the affordability of the necessary hardware and software.
A good RTL SDR device, such as the NooElec NESDR Mini, can be had for around $20, making it an accessible entry point for hobbyists and enthusiasts.
Readers also liked: Software for Rtl Sdr
What is RTL-SDR?
The RTL-SDR is a $30 USB dongle that can be used as a computer-based radio scanner for receiving live radio signals in your area.
It's a very affordable option, considering it can receive frequencies from 500 kHz up to 1.75 GHz.
The RTL-SDR is based on the RTL2832U chipset, which was originally used in mass-produced DVB-T TV tuner dongles.
With the help of community developers, the raw I/Q data on the RTL2832U chipset can be accessed directly, allowing the DVB-T TV tuner to be converted into a wideband software defined radio.
This was made possible through custom software drivers developed by Steve Markgraf and others.
RTL-SDRs cannot transmit, so keep that in mind if you're looking for a device that can both receive and send signals.
The origins of RTL-SDR are rooted in the collaborative efforts of individuals like Antti Palosaari, Eric Fry, and Osmocom.
The RTL-SDR has become extremely popular over the years, democratizing access to the radio spectrum for hobbyists on a budget.
This is a significant change from just a few years ago, when similar SDR capabilities would have cost hundreds or even thousands of dollars.
RTL-SDR Basics
The RTL-SDR is a very cheap USB dongle that can be used as a computer-based radio scanner for receiving live radio signals in your area, no internet required.
It can receive frequencies from 500 kHz up to 1.75 GHz, and most software for the RTL-SDR is community-developed and provided free of charge.
Note that RTL-SDRs cannot transmit.
RTL-SDR Sample Rate
The RTL-SDR sample rate is a crucial aspect of its functionality. The maximum sample rate is 3.2 MS/s, but it's unstable at this rate and may drop samples.
If you're just visualizing the spectrum, dropped samples are okay, but they'll cause problems if you want to demodulate or decode signals. The maximum sample rate that doesn't drop samples is 2.56 MS/s, but some people have reported success with 2.8MS/s and 3.2 MS/s on certain USB 3.0 ports.
Keep in mind that the sample rate affects the quality of the received signals, so it's essential to find the optimal rate for your setup. Experimenting with different sample rates can help you achieve the best results.
Who Owns Rtl-Sdr?
RTL-SDR is a community-based phenomenon, with no single entity owning it.
The original pioneering discoverers of RTL-SDR are Antti Palosaari, Eric Fry, and Osmocom, with Steve Markgraf from Osmocom developing the first driver.
Chinese factories produce and sell generic TV dongles that can be used as RTL-SDRs.
Several companies, like RTL-SDR Blog, have created improved versions of these dongles for SDR use.
The wider RTL-SDR community includes anyone who has created software for the device, discovered and documented a hardware hack, or simply uses an RTL-SDR.
RTL-SDR Hardware
You can buy RTL-SDR Dongles (RTL2832U) that come with a wideband LNA and SMA male to SMA male adapter.
These dongles are a very inexpensive Software Defined Radio based on the RTL2832U, and can be transformed into an impressive, flexible SDR for under $20.
Some scanner enthusiasts have used them to receive satellite and many other VHF/UHF communications, and they can be nearly plug-and-play easy to install and configure.
The RTL-SDR Schematics are not officially available, but GGToshi has created a reverse engineered schematic which can be found at http://ggtoshi.at.webry.info/201406/article_6.html.
RTL-SDR Dongles
RTL-SDR Dongles are an affordable and powerful tool for radio enthusiasts. They're based on the RTL2832U chip, which is also used in digital TV tuners.
You can buy RTL-SDR dongles for around $20, which is a great deal considering their capabilities. Some dongles even come with a LNA (Low Noise Amplifier) and SMA male to SMA male adapter.
One of the best things about RTL-SDR dongles is their versatility. They can be used as a police radio scanner, listening to EMS/Ambulance/Fire communications, or tracking aircraft traffic control conversations. They can even be used to track maritime boat positions, decode POCSAG/FLEX pager traffic, or sniff GSM signals.
Some popular applications for RTL-SDR dongles include:
- Police radio scanner
- Listening to EMS/Ambulance/Fire communications
- Tracking aircraft traffic control conversations
- Tracking maritime boat positions
- Decoding POCSAG/FLEX pager traffic
- Sniffing GSM signals
It's worth noting that some dongles may require a USB OTG cable to connect to an Android device, and an extra power port may be needed to power the dongle.
RF Filters
RF Filters are a must-have when working with RTL-SDR hardware. They help to reduce out of band interference and noise.
By connecting an RF filter between your antenna and RTL-SDR dongle, you can significantly improve signal strength. We've seen it make a big difference in our own testing.
The ADS-B HABAmp is a great option for receiving ADS-B signals. It's a filter + LNA combination that works very well and will improve ADS-B performance.
We've tested the ADS-B HABAmp ourselves and found it to definitely work well, even with the activatable bias tee in our units.
Rtl Sdr Schematics
If you're looking for RTL-SDR schematics, you're in luck because there's a reverse engineered schematic available online. GGToshi has created a schematic that's available at http://ggtoshi.at.webry.info/201406/article_6.html.
Some application example schematics can also be found in the R820T data sheet.
The R820T data sheet is a valuable resource for anyone working with RTL-SDR hardware.
Frequency and Performance
The frequency range of an RTL-SDR is a crucial aspect to consider, especially when looking for a device that can receive a wide range of signals. The frequency range of an RTL-SDR is dependent on the particular tuner variant used in the dongle.
Some dongles, like the RTL-SDR Blog V3 and V4, have hardware enhancements that enable reception below 24 MHz. The Elonics E4000 tuner variant has a frequency range of 52 – 2200 MHz with a gap from 1100 MHz to 1250 MHz.
The Rafael Micro R820T/2/R860 tuner variant has a frequency range of 24 – 1766 MHz, which can be improved to ~13 - 1864 MHz with experimental drivers. The Fitipower FC0013 tuner variant has a frequency range of 22 – 1100 MHz, while the Fitipower FC0012 has a frequency range of 22 – 948.6 MHz.
The dongle's frequency range can greatly impact its performance. If you're looking for a device that can receive a wide range of signals, consider the following options:
The dongles with the greatest frequency range are the Elonics E4000 and Rafael Micro R820T/2/R860 and R828D dongles.
RTL2832U for HF & Trunk-Tracker Scanning
The RTL2832U is a $20 SDR that can be used for HF scanning, but it may have issues with adjacent signals and strong stations within the HF spectrum.
Jeff Benedict has an external board that adds HF capabilities, but he hasn't tried it yet.
Neil has successfully used his RTL-SDR system for demonstrations, including a remote receiver setup with a Raspberry Pi.
The RTL-SDR can be overloaded by strong signals, as Neil experienced with a nearby 2 Meter repeater.
Using two RTL2832U dongles at once could create a trunk-tracker scanner, a project that's both expensive and complicated without SDR technology.
Neil is interested in trying this project out and thinks it could be impressive with a web-updated database controlling the rig.
What Is the Frequency Range?
The frequency range of an RTL-SDR is determined by the tuner variant used in the dongle. The range can vary depending on the implementation.
The Elonics E4000 has a frequency range of 52 – 2200 MHz with a gap from 1100 MHz to 1250 MHz. This is one of the most common tuners used in RTL-SDR dongles.
The Rafael Micro R820T/2/R860 has a frequency range of 24 – 1766 MHz. With experimental drivers, the range can be improved to ~13 - 1864 MHz.
The Rafael Micro R828D has a frequency range of 24 - 1766 MHz in the RTL-SDR Blog V4 Model, while other models may have a cutoff around 1 GHz.
The Fitipower FC0013 has a frequency range of 22 – 1100 MHz, making it suitable for a variety of applications.
The Fitipower FC0012 has a slightly narrower frequency range of 22 – 948.6 MHz.
Here's a summary of the frequency ranges for some popular RTL-SDR tuners:
As you can see, the Elonics E4000 and Rafael Micro R820T/2/R860 and R828D dongles have the greatest frequency range.
System Requirements
To get started with RTL-SDR, you'll need a basic computer setup. At least a dual core processor is required for most general GUI based software defined radio software.
Command line tools and ADS-B decoders can run on less powerful hardware, which is a plus for those on a budget.
A single board PC like the Raspberry Pi 3 can also run several applications, making it a great option for those who want to try out RTL-SDR without breaking the bank.
Minimum PC Requirements

For most general GUI based software defined radio software, you'll need at least a dual core processor.
Command line tools and ADS-B decoders may work with less powerful hardware, but a dual core processor is still the minimum requirement for most software.
Single board PCs like the Raspberry Pi 3 can also run several applications, showing that even lower-end hardware can be used in certain cases.
No person or company owns RTL-SDR and its supported software and hardware, but it was the combined efforts of several individuals who first discovered that certain TV dongles could be used for SDR.
The first RTL-SDR driver was developed by Osmocom, specifically Steve Markgraf, and was released as open source.
Is It Compatible?
If your TV tuner contains an RTL2832U chip, it's probably compatible. If not, it's not compatible.
You can check if your tuner has this chip by looking for it specifically. A list of compatible and incompatible tuners can be found on this reddit wiki page, but keep in mind it's somewhat out of date.
The RTL2832U chip is the key to compatibility, so if you've got one, you're good to go. If not, you'll need to look elsewhere for a compatible solution.
Some popular brands that sell RTL SDR units include RTL-SDR Blog, NooElec, Radioddity, Zerone, and many others.
Accessories and Upgrades
If you're looking to get the most out of your RTL-SDR, you'll want to consider a few accessories and upgrades. Normal USB cables have a length limit of about 5m before they stop working, but you can extend this up to 10 to 15 meters with an active USB cable.
We recommend using RG6 coaxial cable for most links between your antenna and RTL-SDR, as it's low loss and very cheap. It's also a 75 Ohm cable, but don't worry about the mismatch between 50 and 75 Ohm impedances for RX applications - it's completely negligible.
To reduce noise and interference, use clip on ferrite cores on the USB cable. These cores help to suppress unwanted currents in the USB shield and can make a big difference in your reception.
Antennas
When choosing an antenna, keep in mind that there's no one-size-fits-all solution. Every design has a trade-off, and the type of antenna you need depends on your specific requirements.
For a radio system, the antenna is the most important part. If you want to receive everything, a wide band antenna is the way to go. Wide band antennas can receive more frequencies, but will have less gain at any one particular frequency.
Discones are a type of wideband antenna that's ideal for the RTL-SDR. They allow you to receive at almost any frequency with decent performance.
Additional reading: 20-meter Band
Upconverters
Upconverters are a game-changer for RTL-SDR enthusiasts, allowing you to tune into HF frequencies between 0 - 30 MHz.
The lowest frequency an RTL-SDR can comfortably tune to is about 24 MHz. An upconverter shifts frequencies between 0 - 30 MHz "up" by a fixed amount into a frequency range that is receivable by the RTL-SDR.
The SpyVerter is our recommended upconverter, and it's a great choice for RTL-SDR users. It uses a 120 MHz oscillator and has excellent filtering.
It can be powered via USB cable or via the bias-tee on our RTL-SDR Blog dongles. This upconverter reduces overloading and has better SNR than other options.
The SpyVerter is a great value, with a metal case and adapters included, and it's priced similarly or even lower than other upconverters on the market.
Recommended read: Mix 5w 30
Low Noise Amplifiers
If you have long runs of coax cable, a low noise amplifier (LNA) can help improve your reception significantly.
Coax cable is lossy, and the longer it is, the more your received signal is attenuated.
Adding an LNA near the antenna can reduce this loss.
The LNA4ALL is a very affordable wide band low noise amplifier commonly used with the RTL-SDR.
It can be powered externally from any voltage between 6V - 9V, or with a simple modification, with 3V - 5V in bias tee mode.
We've tested the LNA4ALL in bias tee mode with the activatable bias tee in our units and found it to work well.
If you're using a long wire or random wire antenna with a HF modded RTL-SDR or an upconverter, a 9:1 impedance transformer is recommended to get good SWR.
Other Accessories
To get the most out of your RTL-SDR dongle, it's a good idea to keep the antenna and dongle as close together as possible. Normal USB cables have a length limit of about 5m before they stop working.
Related reading: Sdr Radio Rtl Usb

You can extend the length of your USB cable to 10 to 15 meters with an active USB cable, which is a great option for longer setups. Monoprice cables are a recommended choice as they have been reported to work successfully with the RTL-SDR dongle.
For links between your antenna and RTL-SDR, we recommend using RG6 coaxial cable, which is low loss and very affordable. RG6 is a 75 Ohm cable, but don't worry about the mismatch with the 50 Ohm impedance of the dongle - it's completely negligible for RX applications.
Noise and interference can sometimes be induced in the USB cable itself, which can show up in the RF spectrum. To stop this noise, use clip on ferrite cores on the USB cable to suppress unwanted currents in the USB shield.
If you're using an RTL-SDR on an Android phone with software like SDR Touch and Wavesink, you'll need a USB on-the-go (OTG) cable. Look for cables that come with power plugs so you can use them with a power pack - using an RTL-SDR can quickly drain a mobile's battery.
Software and Android
SDR Touch is an Android app that allows you to use an rtl-sdr dongle on your mobile device. It's a great tool for turning your phone or tablet into a portable software defined radio scanner.
You'll need a USB OTG cable to connect your Android device to the tv dongle, and a compatible rtl-sdr dongle that can be purchased for about $20USD. The app has a wide range of features, including the ability to listen to live on air FM radio stations, weather reports, and more.
SDR Touch currently supports a range of signals, including WFM, AM, NFM, USB, LSB, DSB, CWU, and CLW. However, some of these features are still experimental and may not work fully.
You can download SDR Touch for free from the author's website, but be aware that it's been removed from the Google Play store due to licensing issues. Upgrading to the Pro version for £5.99 removes a trial timer on the graphical spectrum viewer feature.
Many people are using SDR Touch as an Android in-car radio on their tablet, and the author has promised to integrate more features, including a Frequency Manager, to make this use case even easier.
SDR Touch also has an option for connecting to a networked rtl stick, which requires using rtl_tcp on the host machine and entering the host machine's IP address in the app.
Frequently Asked Questions
What is the maximum gain for RTL-SDR?
The maximum gain for RTL-SDR is 49.6 dB. However, optimal gain settings typically range from 20.0 to 40.0 dB, depending on your antenna.
Featured Images: pexels.com


