
Using a Raspberry Pi and OpenWebRX can make rtl sdr drone detection surprisingly easy.
The Raspberry Pi is a small, affordable computer that can be easily set up to run OpenWebRX, a software that allows you to visualize and decode RTL-SDR signals in real-time.
OpenWebRX can be accessed through a web browser, making it simple to monitor and detect drones from anywhere with an internet connection.
With OpenWebRX, you can create a custom dashboard to display the signals you're receiving, making it easier to identify and track drones.
Take a look at this: Rtl Sdr on Raspberry Pi
Drone Detection Methods
Using a KerberosSDR, a 4-channel phase coherent RTL-SDR unit, can make radio direction finding, passive radar, and beam forming possible.
This unit can be used to track a drone carrying an FM beacon, as demonstrated by researchers from the University of East China Normal University.
They set up both circular and linear antenna arrays for the KerberosSDR and flew a drone in front of the array while recording the bearings calculated by the system.
A linear array produced more accurate results, but it cannot differentiate if an object is in front or behind the array.
The pseudo-Doppler method requires an array of antennas arranged in a circle and rapid switching to achieve a "rotational" motion.
This method can reveal the drone's flight direction, known as the Angle of Arrival – AoA.
Drones can also be detected by detecting changes in waves from other transmitters, such as LTE or radio waves.
Hardware and Software
To detect drones, you can use a USRP B210 module, which is a more sensitive option, or a cheaper RTL-SDR Software Defined Radio, which will sacrifice some detection sensitivity.
A switching antenna system is also necessary for accurate drone detection, allowing you to not only detect the drone but also its approximate flight direction.
Using a regular SDR like RTL-SDR is a cost-effective option for drone detection, but keep in mind it may not be as sensitive as other options.
What You Need
To detect a drone, you don't need to break the bank. A USRP B210 module can be used for detection without unreasonable costs.
A regular SDR, like an RTL-SDR, will also work but you'll need to sacrifice some detection sensitivity.
A switching antenna system is essential for not only detecting the drone but also figuring out its approximate flight direction.
Remote Drone Spectrum Monitoring with Raspberry Pi and OpenWebRX
Remote spectrum monitoring drones are a game-changer for various applications, including emergency communications, ham radio, and 3D spectrum mapping.
Zoltan of rfsparkling.com created a proof of concept remote spectrum monitoring drone using an RTL-SDR connected to a Raspberry Pi, which runs an OpenWebRX server that broadcasts radio data via 4G mobile internet.
The drone's connection flow chart involves the antenna, RTL-SDR, Raspberry Pi 2, OpenWebRX Server, 4G mobile net, and finally the Internet, allowing users to access the radio data via a browser with OpenWebRX client.
Zoltan noted that the biggest limitation of the drone is its flight time of about 10 minutes, but wire-powered drones could be a solution for future experiments.
Hak5's remote RTL-SDR ADS-B drone had limited results, but Zoltan and András' drone experiments showed much better results, demonstrating the potential of remote spectrum monitoring drones.
The video below shows an example of Zoltan and András' drone experiments, showcasing the capabilities of their remote spectrum monitoring drone.
With the ability to broadcast radio data via 4G mobile internet, remote spectrum monitoring drones can provide real-time data to users, making it an exciting development in the field of spectrum monitoring.
Dronesense: Limesdr-Based Drone Detector and Jammer
Dronesense is a LimeSDR based drone detector and jammer that uses a spectrum-scanning system to find potential drone signals.
The LimeSDR is a US$299 12-bit TX/RX capable SDR that can tune between 100 kHz – 3.8 GHz, with a maximum bandwidth of up to 61.44 MHz.
Dronesense can detect and jam drone signals, causing them to enter a fail-safe mode and either return to base or land.
This method specifically targets the drone's frequency, making the jammer compliant with radio regulations by not interfering with other legitimate users.
Dronesense is mounted on another drone with an omnidirectional jamming antenna and runs with a GNU Radio based flowgraph that decides if a detected signal is from a drone and activates the jammer if so.
Unfortunately, the software and further details aren't available due to non-disclosure agreements.
Data Acquisition
Data acquisition is a crucial step in understanding the behavior of drone remote controls and drones themselves. The researchers used an anechoic chamber to record the raw RF signal without interference for at least one minute.
The signals were received by a log-periodic antenna and sampled and stored by an Ettus Research USRP B210. This equipment allowed for precise measurement of the signals.
To gather data, the researchers conducted static and dynamic measurements. In the static measurement, they recorded the signals of the remote control (TX) alone or with the drone (RX). In the dynamic measurement, one person at a time was inside the anechoic chamber and operated the remote control (TX).
The sampling frequency used was 56565656 MHz, which is the highest possible real-time bandwidth. This high sampling rate allowed for detailed analysis of the signals.
Here's a summary of the drone models and recording parameters used in the study:
The researchers also recorded three types of noise and interference to better understand the signals.
Theory and Explanation
The pseudo-Doppler method uses an array of antennas arranged in a circle to detect drones by demodulating changes in phase and frequency. This creates a "rotational" motion that appears to the receiver.
The method can even detect drones in a simple way by detecting changes in waves from other transmitters like LTE, 5G, radio, etc. A flying drone disrupts these waves due to rotor rotation, creating a micro-Doppler effect.
To use the pseudo-Doppler method, a rapid switching of antennas is required, which achieves the "rotational" motion without physically rotating the antennas.
Monitor Drone FPV Frequencies with USRP
The USRP (Universal Software Radio Peripheral) is a powerful tool for monitoring drone FPV frequencies. It can tune into a wide range of frequencies, including 2.4 GHz and 5.8 GHz, which are commonly used for FPV control and video transmission.
Balint, a researcher at Ettus, has used the USRP to help with frequency management at FPV time trial racing events. He has been using GNU Radio coupled with a USRP X310 to get wide band RF spectrum waterfall views of the 2.4 and 5.8 GHz bands.
With the USRP, Balint can see when control signals and video signals are transmitted and at what frequency, and can tell if any are overlapping and jamming each other. This is crucial for preventing interference and ensuring reliable communication between the drone and its pilot.
FPV drones typically use frequencies around 2.4 GHz for control and 5.8/2.4/1.3 GHz for video. To manage these frequencies effectively, it's essential to have a clear understanding of the different frequencies used and how they interact with each other.

Here's a summary of the frequencies used by different FPV drones:
By monitoring these frequencies with the USRP, pilots and event organizers can ensure that frequencies are managed effectively, reducing the risk of interference and improving the overall FPV experience.
Pseudo-Doppler Method Explained
The pseudo-Doppler method is a clever way to detect and track drones. It uses an array of antennas arranged in a circle to create a "rotational" motion, even though the antennas don't physically rotate.
This motion allows for changes in phase and frequency to be demodulated and compared, revealing both the drone and its flight direction (Angle of Arrival – AoA). A flying drone disrupts radio waves from other transmitters, creating a micro-Doppler effect.
Drones can be detected in a simple way by detecting changes in waves from other transmitters, such as LTE, 5G, radio, etc.
Data Preparation
Data Preparation is a crucial step in any signal processing project, and it's no different for drone signal detection. The researchers in this study divided the drone signals into non-overlapping vectors of 1048576 samples, which is equivalent to 74.97 milliseconds.
They only used vectors that contained a portion of the signal whose energy was above a threshold, which was arbitrarily set at 0.001 of the average energy of the entire recording.
The selected drone signal vectors were normalized to a carrier power of 1 per sample, which means only the part of the signal vector containing drone bursts was considered for the power calculation.
Noise vectors, such as Bluetooth, Wi-Fi, and amplifier noise, were normalized to a mean power of 1.
Here's a summary of the normalization equations used for drone and noise vectors:
The researchers then mixed the normalized drone signal vectors with the normalized noise vectors to generate noisy drone signal vectors at different SNRs. The mixing equation used is shown below:
y^(i) = (k⋅x^(i)+n^(i))k+1, with k=10SNR10
Field Test and Results
The field test for the detection system was conducted in Rapperswil at the Zurich Lake, where a drone detection prototype was placed on the shore in line of sight of a wooden boardwalk across the lake.
The experiment involved measuring the signals from transmitters mounted on a 2.52.52.52.5 m long wooden pole at four positions along the walkway, at approximately 110110110110 m, 340340340340 m, 560560560560 m, and 670670670670 m from the detection system.
At each recording position, the directional antenna was directed at three different angles: 0∘superscript00^{\circ}0, 90∘superscript9090^{\circ}90, and 180∘superscript180180^{\circ}180.
The drones and remote controls used in the field test included DJI Phantom Pro 4 drone and remote, Futaba T14 remote control, Futaba T7 remote control, FrySky Taranis Q X7 remote control, and Turnigy Evolution remote control.
The resulting number of samples for each class, distance, and angle are shown in the table below:
5 Discussion
RTL-SDR technology is a powerful tool for drone detection.
Using RTL-SDR, you can detect drones from a distance of up to 10 miles, depending on the signal strength and antenna quality.
The RTL-SDR can pick up signals from drones operating on frequencies between 24 and 2500 MHz, which includes most commercial and hobby drones.
RTL-SDR is a cost-effective alternative to traditional radar systems, making it an attractive option for those looking to detect drones without breaking the bank.
Drones operating on 2.4 GHz frequencies can be detected using RTL-SDR, which is a common frequency for many commercial drones.
The RTL-SDR can also detect drones operating on 5.8 GHz frequencies, which is another common frequency used by many drones.
Data Processing
The raw RF signals were recorded using an Ettus Research USRP B210, which sampled and stored the signals at a sampling frequency of 56565656 MHz.
This high sampling frequency is crucial for capturing the detailed information of the RF signals.
The signals were recorded for at least one minute, which allowed for a stable and consistent measurement.
The data was recorded in an anechoic chamber to minimize interference from external sources.
The chamber's anechoic properties ensured that the recorded signals were free from unwanted noise and reflections.
The data was recorded using a log-periodic antenna, which is designed to capture a wide range of frequencies.
The antenna's design allowed for a high-gain signal reception, which is essential for accurate signal processing.
The recorded signals were then analyzed using a variety of techniques to extract the relevant information.
The analysis involved processing the signals to remove noise and interference, and to identify the specific characteristics of the RF signals.
The processed data was then used to train machine learning models for drone detection.
The machine learning models were trained on a dataset that included the recorded signals from various drone models, as well as noise and interference recordings.
The dataset included recordings from DJI Phantom GL300F, Futaba T7C, Futaba T14SG, Graupner mx-16, Bluetooth/Wi-Fi noise, Taranis ACCST, and Turnigy 9X transmitters.
Here is a summary of the recording parameters for each transmitter:
Frequently Asked Questions
What is the RF scanner for drone detection?
The RF scanner is a device that detects and identifies nearby drones by analyzing radio frequencies commonly used by UAVs. It accurately differentiates drones from other signals, such as WLAN, and can even locate them.
Featured Images: pexels.com


