
Installing OpenWrt on your Xiaomi AX3000T router is a bit more involved than other routers, but with the right steps, you can do it successfully. The first step is to download the OpenWrt firmware from the official OpenWrt website.
The AX3000T's hardware specifications, such as its 1.5 GHz quad-core CPU and 128 MB of RAM, make it a suitable candidate for running OpenWrt. This ensures a stable and efficient OpenWrt experience.
To begin the installation process, you'll need to create a bootable USB drive with the OpenWrt firmware. This can be done using a tool like Etcher or Rufus, depending on your operating system.
A different take: Openwrt Firmware
Flashing Firmware
To flash the firmware on your Xiaomi AX3000T, you'll need to download the necessary files, including OpenWRT v24.10.0 and the xmir-patcher tool.
The firmware update process involves several steps, including accessing the router's parameters, selecting the firmware file, and entering the stock code. This code is displayed in the browser's address bar and is used to crack the firmware.
You'll also need to download the MIWIFIRepairTool, which is a utility software for flashing the firmware.
To flash the firmware, you'll need to use the SSH client, such as PuTTY, to connect to the router. The router's IP address is 192.168.31.1, and the default port is 22.
Here's a step-by-step guide to flashing the firmware:
1. Download the necessary files, including OpenWRT v24.10.0 and the xmir-patcher tool.
2. Connect to the router using SSH, using the IP address 192.168.31.1 and the default port 22.
3. Enter the stock code, which is displayed in the browser's address bar.
4. Use the xmir-patcher tool to enable SSH functionality.
5. Download the MIWIFIRepairTool and run it on your computer.
6. Follow the instructions in the tool to flash the firmware.
Note: Be careful when flashing the firmware, as it can potentially brick your router. It's recommended to follow the instructions carefully and make sure you have a backup of your data before proceeding.
Here's a summary of the firmware update process:
Remember to be patient and careful during the firmware update process, as it can take some time to complete.
Optional Updates
The OpenWRT firmware for the Xiaomi AX3000T can be updated manually, but it's recommended to use the LuCI web interface for a more user-friendly experience.
To update the firmware, you'll need to navigate to the System > Firmware Update page in LuCI. From there, you can select the new firmware file and follow the prompts to complete the update.
For users who prefer a more hands-on approach, the firmware can also be updated using the command line interface. This method requires a bit more technical knowledge, but it's still a viable option for those who are comfortable with it.
On a similar theme: Openwrt Update Firmware
U-Boot Update (Optional)
If you're looking to update your U-Boot, it's a relatively straightforward process.
To start, you'll need to SSH to your router's IP address, which is 192.168.1.1, and access it through port 22.
After you're logged in, you'll need to flash a specific file, openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb, and then reboot your system.
This will initiate the U-Boot update process.
System Update Execution

To execute a system update, you'll need to access your router via SSH.
You'll then run a specific command to upgrade the system.
The update process involves executing a command that will initiate the upgrade.
Your router will restart once the update is complete.
After the restart, OpenWRT system installation is complete.
You can now open your Wi-Fi and set a password.
Explore further: Openwrt Sysupgrade
Router Information
The Xiaomi AX3000T router is a great option for those looking for a reliable and efficient device. It has a price tag of less than 50€, which is very affordable.
One of the key features of the AX3000T is its Wi-Fi capabilities. It supports both 2.4 GHz and 5 GHz frequencies, with speeds of up to 574 Mbps and 2402 Mbps respectively.
The router has 4 high-gain antennas, which help to improve the signal strength and coverage area. This is especially useful for larger homes or offices.
The AX3000T is also a quiet router, as it doesn't have a fan. This makes it perfect for use in noise-sensitive areas.
Related reading: Xiaomi MIX 4
Here are the key specifications of the Xiaomi AX3000T router:
The AX3000T also supports various security protocols, including WPA-PSK, WPA2-PSK, and WPA3-SAE. This ensures that your network is secure and protected from unauthorized access.
Installation Steps
To install OpenWRT on your Xiaomi AX3000T router, you'll need to follow these steps.
First, download the OpenWRT firmware for your router from the OpenWRT website. You'll need to get the .ubi and .bin files.
Copy the .ubi file to the /tmp directory of your router using SSH. You can do this by running the command `scp` from your PC to the router.
Once you've copied the .ubi file, you can verify that it's been transferred successfully by running the command `ls /tmp` in the SSH console of your router.
Next, you'll need to format a UBI volume and flash the OpenWRT .ubi file onto it. This can be done by running the command `ubiformat` followed by the command to flash the OpenWRT .ubi file.
On a similar theme: Setup Openwrt Luci Https through Command Line
After formatting the UBI volume, you'll need to enter the lines of command indicated in the OpenWRT wiki, one by one. Be sure to wait for the router to reboot after each command.
If your router has a new NAND chip, you may need to use a different version of OpenWRT. According to the OpenWRT website, the version SNAPSHOT is compatible with the new NAND chip.
Here are the specific commands you'll need to run to install OpenWRT on your Xiaomi AX3000T router:
- `ubiformat`
- `sysupgrade-n/tmp/openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-squashfs-sysupgrade.bin`
Note that you'll need to replace the filename with the actual filename of the OpenWRT firmware you downloaded.
Once you've completed these steps, you should be able to access the OpenWRT web interface at `192.168.1.1` and configure your router as needed.
System Configuration
The default configuration of the Xiaomi AX3000T with OpenWRT system is not enabled, so you'll need to configure it using a computer.
To access the web management interface, go to 192.168.1.1 and log in with the default credentials: root/root.
Once logged in, navigate to Network > Wireless to configure the Wi-Fi settings.
Real Configuration Used
The real configuration used in this setup is a working one, where a Galaxy smartphone is connected to a USB-C to Ethernet adapter, allowing it to be recharged from a classic charger.
The adapter can be found on Amazon for around 18€.
To set up the smartphone, it needs to be configured to use mobile data (in this case, 5G) and connected via USB to the WAN port of the router.
The smartphone's configuration shows it connected to a charger and 5G for data transfer, with approximately 200Mo upload and 40Mo download speeds.
A custom IP address range of 172.24.0.0/16 is chosen for the installation.
The router is set to IP address 172.24.0.254, the NAS server to 172.24.0.253, and the BambuLab to 172.24.0.200.
Static IP addresses are assigned to the NAS server and BambuLab based on their MAC addresses, ensuring they retain the same IP address every time they're restarted.
Suggestion: Openwrt Nas
Enable SSH Service
To enable the SSH service on your AX3000T router, you need to open its SSH.
Explore further: Openwrt Ssh 修改dns
When connecting your computer to the router, make sure to choose the LAN port, even if the WAN/LAN ports are not labeled.
Enter the device's web password to access the management backend.
You don't need to calculate a password based on your SN; the latest tools only require the backend password.
To install permanent SSH, go to the menu and select option 7.
The SSH service will be installed permanently, making it easy to connect to your router's SSH in the future.
Broaden your view: Wake on Lan Openwrt
Five System Usage
After completing the initial setup, the router's WIFI is still disabled by default, so you'll need to configure it using a computer.
The OpenWRT system already has a web management interface accessible at 192.168.1.1, where you can log in with the account "root" and password "root".
Once logged in, navigate to Network -> Wireless to view the router's wireless network cards, which correspond to the 2.4G and 5G frequencies.
Before enabling the WIFI, click Edit to set the WIFI password and other settings.
In the Wireless Security settings, you can set the WIFI password to your preference.
Check this out: Openwrt Travel Router
Featured Images: pexels.com

