
If your iPhone 7 won't turn on, it can be frustrating and worrisome, but don't worry, we've got you covered.
First, make sure your iPhone 7 is charged. If it's been a while since you've charged it, try plugging it in for at least 30 minutes to see if it turns on.
If it still won't turn on, check if your iPhone 7 is in DFU mode. This mode can sometimes be mistaken for a dead iPhone, but it's actually a way to recover your device.
To get out of DFU mode, press and hold the sleep/wake button for 3 seconds, then immediately press and hold the volume down button for 10 seconds.
Suggestion: Iphones Going into Sos Mode
Troubleshooting
If your iPhone 7 won't turn on, try plugging it into a power source and see if it will charge. If it doesn't, try resetting it by holding down the power button and home button simultaneously for 10 seconds.
First, make sure your iPhone 7 is properly plugged into a power source and that there is no problem with the outlet or cord. If the phone still won't turn on, it's possible that the battery is dead.
A dead battery can be caused by a lack of power, so try plugging your iPhone 7 into a power source and see if it will turn on. If it doesn't, it's possible that there is a more serious issue with your device.
If your iPhone 7 won't turn on past the Apple logo, it may be due to a software or hardware issue. Try pressing and holding the Sleep/Wake button and the Volume Down button at the same time for 10 seconds to see if it will reboot.
If your iPhone 7 still won't turn on, try connecting it to a computer using a Lightning cable and see if iTunes recognizes your device. If it does, you may be able to update its software and fix the problem.
If none of these troubleshooting steps work, it's likely that your iPhone 7 has a hardware issue. In this case, you'll need to take it to an Apple Store or an authorized service provider for further diagnosis and repair.
Discover more: How to Read Blocked Text Messages on Iphone
Some common reasons why your iPhone 7 won't turn on include a software malfunction, insufficient battery power, and hardware damage. If your iPhone 7 is not turning on, try checking the charger and Lightning cable for any damage.
If your iPhone 7 is stuck on a black screen, try plugging it into a power source and letting it charge for a few minutes to see if it will turn on. If it doesn't, try inspecting the charger and Lightning cable for any damage.
In some cases, a software crash can cause the OS to become messed up, resulting in an iPhone 7 that won't turn on. In this case, you can use an iOS system repair application to troubleshoot errors within the system.
To troubleshoot errors within the system, follow these steps:
1. Connect your iPhone 7 to a computer
2. Select the repair mode (Standard or Advanced)
3. Click the Start button
4. Click the Fix button to continue
Note: If you choose Advanced mode, the utility will erase all data and download the firmware.
Worth a look: Turn on Dark Mode for Certain Apps Iphone
Force Restart and Recovery
A force restart can be a lifesaver if your iPhone 7 won't turn on. To force restart your iPhone 7, long press the Sleep button and the Volume Down key until the handset restarts and the Apple logo appears.
If your iPhone 7 is stuck on the Apple logo or a black screen, try entering into Recovery mode. This can be done by connecting your iPhone to a Mac using a USB cable, opening Finder, clicking on your iPhone in the sidebar, and then pressing and quickly releasing the Volume Up and Volume Down buttons.
To hard reset your iPhone 7, press and hold down the Volume Down and Sleep/Wake buttons simultaneously. When the Apple logo appears on the screen, release both buttons.
If your iPhone 7 won't turn on at all or gets stuck during boot-up, try connecting it to a computer and using iTunes to restore it. This can be done by connecting your iPhone to a computer, opening iTunes, and then selecting the "Restore iPhone" option.
A hard reset is a temporary fix to a software problem or system crash. It clears the memory on the phone and corrects the errors that make the iPhone screen turn black or get frozen.
For more insights, see: Black Spot Iphone X
Restore
If your iPhone 7 won't turn on, one option is to restore it from DFU mode. This involves connecting your iPhone to a computer and launching iTunes, then long pressing the Sleep button and Volume Down button simultaneously for 10 seconds.
To put your iPhone in DFU mode, follow these steps: connect your iPhone 7 to a computer and launch iTunes, then long press the Sleep button for 3 seconds and simultaneously long press the Volume Down button. Keep pressing both buttons for 10 seconds, then release the Sleep button but keep pressing the Volume Down button for 5 seconds.
If your iPhone is stuck on a black screen with an Apple logo, a hard reset may be necessary. To hard reset your iPhone while plugged into a computer, press and hold the power button and Volume Down button until the screen goes blank and the Apple logo appears.
Here are the steps to hard reset your iPhone while plugged into a computer:
- Plug your iPhone into a power source using a Lightning cable.
- Press and hold the power button and Volume Down button until the screen goes blank and the Apple logo appears.
- Let go of both buttons when the Apple logo appears on the screen.
- The hard reset is complete when your iPhone turns back on.
If your iPhone 7 is frozen or won't turn on, try a hard reset by pressing and holding down the Volume Down and Sleep/Wake buttons simultaneously. Release both buttons when the Apple logo appears on the screen.
Fixing the Issue
Don't panic if your iPhone 7 won't turn on - there are solutions to try.
Click "Standard Repair" and proceed with the downloading of the latest firmware package for your iPhone 7. This can help resolve the issue without data loss.
If you need to solve the problem without any loss of data, you can use iOS System Repair Tool Tenorshare ReiBoot. This software resolves all sorts of issues related to Apple devices, such as iPhone stuck on Apple logo, black screen, and so forth.
To fix iPhone 7 Not Turning on without Data Loss, follow these steps:
- Download and install Tenorshare ReiBoot software.
- Select the "Standard Repair" option and proceed with the downloading of the latest firmware package.
If your phone turns on but gets stuck during startup, and you see the Apple logo flashing on the screen, or a red or blue screen, putting the iPhone 7 or iPhone 7 Plus device into recovery mode could often solve the problem.
To put your iPhone 7 or iPhone 7 Plus into recovery mode, follow these steps:
- Open iTunes or Finder on a PC or Mac.
- Connect iPhone 7 (Plus) to the computer. If it's responded to the connection, and it shows on the iTunes or Finder's window, back it up first. If not, skip to the next step.
- Put it into recovery mode: Press and hold the Top (or Side) and Volume Down buttons at the same time. Keep holding them until you see the recovery mode screen.
- On computer, you will see the option to update or restore. Choose Update.
Power and Charging
If your iPhone 7 won't turn on, the first thing to check is the battery level. Plug in your device to a power source to charge your battery, as a dead battery can prevent the screen from turning on.
Make sure you're using the correct charger and lightning cable. A faulty charger or cable can prevent your iPhone from charging. Check if the adapter and cable are working properly and replace them if necessary.
If your iPhone still won't charge, try using a different charger and cable to rule out any issues with the charging method. You can also try attaching your iPhone directly to a computer using a functioning cable. If your computer recognizes your iPhone, it will show its status as charged.
If your iPhone is stuck on a black screen, it may be having a problem with the power supply. Plug in your device and let it charge for a few minutes to see if it shows the charging screen. If it does, it's likely a low battery issue.
Recommended read: Iphone Seven Battery Life
To troubleshoot charging issues, inspect your charger, lightning cable, and lightning port for any signs of damage or debris. Make sure you're using a genuine Apple cable or an Apple-certified cable.
If your iPhone is still not turning on, you can try a software crash fix using an iOS system repair application like iOS System Recovery. This can quickly fix system errors and bring your iPhone back to life.
If you're still having trouble, try a hard reset by pressing and holding down the Volume Down and Sleep/Wake buttons simultaneously. This can clear the memory and correct software errors.
Here's a troubleshooting checklist to help you identify the issue:
- Check the battery level and charge your device
- Inspect the charger, lightning cable, and lightning port for damage or debris
- Try a different charger and cable
- Attach your iPhone directly to a computer
- Try a software crash fix using an iOS system repair application
- Perform a hard reset
Software Issues
A software issue is a common reason why your iPhone 7 won't turn on. Software malfunction is the reason behind 90% of the issues that take place with Apple devices. This can cause your iPhone to be dead, perhaps forever.
A small error in the software can prevent your iPhone from turning on, and it may look like it's not working at all. If your iPhone 7 is on but not responsive, it may be experiencing a software crash, which causes the screen to turn black and become unresponsive.
If this caught your attention, see: Iphone X Software Reset
To diagnose a software issue, try connecting your iPhone to a computer using a Lightning cable. If iTunes recognizes your device, you may be able to update its software and fix the problem.
If your iPhone 7 won't turn on after a software update, it's possible that there's a glitch in the system that could cause your phone to freeze. In this case, try resetting your iPhone by holding down the power button and home button simultaneously for 10 seconds.
Here are some common software issues that can cause your iPhone 7 to not turn on:
- A software crash
- A glitch in the system
- A software update issue
- A software malfunction
If none of these troubleshooting steps work, it's likely that your iPhone 7 has a hardware issue. In this case, you'll need to take it to an Apple Store or an authorized service provider for further diagnosis and repair.
Featured Images: pexels.com


