How to Convert Electric Stove to Gas?

Author Danny Orlandini

Posted Jan 9, 2023

Reads 28

Circuit board close-up

Electric stove to gas conversion can be a tricky task because there are many safety precautions and technicalities involved. But with the right direction, turning an electric stove into a gas stove is not as difficult or multifaceted as it might seem.

To convert an electric stove to gas, start by removing the existing electric burners, plugs and wiring for safety purposes. Then remove the grates and possibly even the burner panels from the stovetop. Cut out any access doors and/or surrounding trim in order to route the shutoff valve and regulator through them. Connect the flexible rubber piping that comes with your gas conversion kit to the shutoff valve leading up to the burner box on your stovetop using a wrench or pipe wrench. If your appliance is made after 1975, make sure it meets ANSI Z21.1 standards before proceeding with the conversion process. Securely attach your flexible gas line to the ventilation opening in order to provide extra protection against accidental fires and leaking gas. Finally, connect your switch plate assembly according to manufacturer's directions before adding back all of your grates, burners, knobs, etc., back into place before testing everything out through a series of performance checks listed in your user manual.

Converting an electric stove to a gas one doesn’t require any special tools or skills; all you need is some caution and patience. In addition, you should also consult local authorities for advice regarding any applicable regulations within your city limits for safety compliance since some areas may have restrictions with regards to converting appliances from one type of power supply source (electric) to another (gas). Following these steps will help you complete this task successfully and make sure that you use your new-and-improved appliance safely!

How do I convert an electric stove to a gas stove?

If you are considering converting an electric stove to a gas stove, it is important to consider the effort and supplies needed. This process should not be attempted unless you have basic technical aptitude and understand the potential danger involved with exposed gas lines and inadequate venting.

Depending on which type of electric stove you are converting, an easy way to start is by removing the top of the cooktop and examining the size, shape, and depth of the burners. Make sure whatever type of gas burner or stub-outs that you install will fit in the cooktop properly. With regards to gas lines, a certified technician or local plumber should be hired to prevent unsafe connections between your home and the main gas line running through town streets.

Be sure to check for proper ventilation requirements for any new parts that accompany your conversion, such as an exhaust fan or outside ventilation flue. Finally, properly seal all connections using Teflon tape or pipe dope before turning on your new gas supply. Once everything is installed correctly, turn on your valve slowly to test for any leaks. After all connections have been made, do a final safety check of everything involved in this project prior to using your brand-new gas stove!

What tools are needed for a stove conversion from electric to gas?

The process of converting an electric kitchen stove to a gas range can be an intimidating task, and it is important that homeowners understand the proper tools and items needed in order to complete it safely. To start off, you should always obtain the services of a qualified and certified professional to help with any converting from electric to gas, as this is highly technical work. However, having said that, it is helpful for homeowners to have some knowledge of these tools, should they decide to attempt the conversion themselves.

First off is a range installation kit, which includes items like clearance shields, hand wheels and connectors. This set usually also includes parts needed for propane gas ranges as well as natural gas ranges. It may also include instruction manuals specific to your brand and type of stove that provide details on assembly and other technical information.

Next up will be tool-specific items such as a Phillips head screwdriver, a flathead screwdriver and adjustable wrenches. These can help you handle nuts and bolts during the assembly process and tighten them once everything else is in place. Kitchen sink cutout kits are also necessary trim pieces when converting your stove from electric to gas; they come equipped with all the necessary materials needed to create precise openings in your cabinetry for connecting the fuel lines of the new range installation.

Finally it is important to have regulator valve boxes for both your gas line pressure regulator valves as well as safety relief valve systems—these are standard components necessary in any home cooking appliance installation. Now that you have a better understanding of what tools are needed for a conversion from electric to gas stovetop ranges, you can get started on taking on this job safely and effectively!

What safety precautions should be taken during an electric-to-gas stove conversion?

Gas ranges are becoming increasingly popular due to their cooktop speed and efficiency. However, converting from electric to gas can potentially be a dangerous process. To stay on the safe side of things, it’s important to take certain precautions when converting your electric-to-gas stove.

First, make sure all the appliance safety switches are deactivated. Then, if you’re opening up the wall cavity behind your stove, you should turn off the circuit breaker or remove the fuses that supply power to that circuit. Remember that some older stoves are connected directly to a junction or plug box, so be sure to unplug it before proceeding with any work. For an extra layer of safety, use a voltage tester before turning on any power sources in order to ensure the electricity has indeed been cut off. From here, you can start preparing for installation by following the manufacturer’s instructions for mounting brackets and other hardware needed for a secure installation.

Once everything is ready to go and all connections have been made carefully according to code requirements, it’s time for professional testing and inspection from a licensed gas fitter. This is absolutely necessary in order to ensure proper venting and sealing of every connection as leaks could potentially cause explosions or fires if not corrected in time. Lastly, complete maintenance tasks like monthly gas burners cleaning and line checking annually will go a long way toward making sure your gas range will stay safe and efficient over time!

How do I tell if my stove is suitable for conversion from electric to gas?

It can be an exciting and cost-saving decision to convert your electric stove to gas, but it pays to know if your current model is suitable for the switch. Here are some things to consider as you plan for this retrofit:

First and foremost, it’s essential that your stove be free from electric wiring. Electric stoves typically require rewiring in order to be converted, which can be a complicated process. If you are not comfortable handling electrical work better leave it to a professional. Second, check the surface area and burner sizes of your current unit - they should closely match those of the gas insert you plan on purchasing. Third, since gas stoves often run hotter than electric ones, make sure you have good ventilation for proper air circulation before making the switch.

Finally, check with local building codes or homeowners association rules as there may be restrictions or regulations governing conversion from electric to gas. With a little research, careful consideration of safety precautions and adherence to local standards, converting an electric stove is seemingly achievable!

Are there specific regulations that need to be followed during a gas stove conversion?

Natural gas is a popular choice for powering kitchen stoves and many households in the United States have made the switch from electric to natural gas. But this switch comes with certain responsibilities. Complying with safety regulations during conversion is essential for protecting people and property from potential risks that come with natural gas use.

First, it is important to secure all the necessary permits required for the project, typically before beginning any type of conversion. This should generally include the permits issued by local authorities such as Consumer Protection or Fire Protection regarding the suitability and legality of changing to natural gas appliances in a given area, as well as permits related to hydronic installations and vent systems, where applicable.

Second, all gas line connections should be handled by a qualified professional who understands current safety protocols and building codes when it comes to dealing with combustible fuel sources like natural gas. This means directly utilizing services provided by certified contractors who are authorized to work with this particular fuel source. Such contractors should be able to provide references of their work as well as certification that they are qualified to perform such jobs.

In addition, any residence converting from electric stoves or other appliances to natural gas must have proper venting installed that leads outside and can accommodate the release of exhaust gases produced during operation of devices powered by this fuel source. This process involves additional tools and equipment, which can cause additional expenses when changing over from electric stoves. Following these regulations can ensure a safe conversion process for those interested in making the switch from electric to natural gas stoves in their residences.

What is the expected cost for converting an electric stove to a gas stove?

The cost of converting an electric stove to a gas stove depends largely on the complexity of the project. In general, homeowners should expect to spend between $1,500 and $4,500 for the conversion. Depending on the type of stove you have and where you live geographically, some local codes may require additional labor or parts. It is best to consult a local plumbing contractor or gas appliance technician for advice specific to your location and particular appliance conversion.

When converting from electric to gas, there is a relatively short list of necessary parts that make up the conversion process. This list will include a new gas line connection, adaptor kit for the stove, and the necessary valves and connectors. Also needed are flue sealant and stainless steel mesh tape along with any fittings that are needed to make connections work with existing structures. All of these items cost an additional fee depending on what is necessary for your particular installation needs.

In addition to parts costs, labor costs can be anywhere from $475 – $1000 further adding to the overall bill. The installation process itself needs to be approached with great caution due to the dangerous nature of working with natural gas lines and connections. A licensed plumber will be able to do the job quickly since he or she has been properly trained in this area of expertise.

Due to this range of variability in pricing for converting an electric stove into a gas one it’s important for prospective customers looking into this project to get multiple estimates from local providers and compare costs versus what is included in each quote before making a final decision on who they choose as their installer. This is one project where it definitely pays off to shop around!

Danny Orlandini

Danny Orlandini

Writer at Go2Share

View Danny's Profile

Danny Orlandini is a passionate writer, known for his engaging and thought-provoking blog posts. He has been writing for several years and has developed a unique voice that resonates with readers from all walks of life. Danny's love for words and storytelling is evident in every piece he creates.

View Danny's Profile