How to Connect Brother Printer to Mac?

Author Danny Orlandini

Posted Jan 13, 2023

Reads 29

Circuit board close-up

If you’re looking for instructions on how to connect your Brother printer to a Mac computer, you’ve come to the right place. Connecting a printer often seems like a complicated task, but it’s actually a relatively simple process when you break it down step-by-step. Thankfully, the Mac operating system makes it quite straightforward and easy to do. Here’s how to get started:

First of all, you should be aware that some Brother printers must be connected via USB while others can connect an Ethernet cable or even use Wi-Fi instead. Once you have decided which type of connection you want to use with your printer, you will need to ensure that both the computer and the printer are powered on. After that, go ahead and insert any pertinent software or driver discs which came with your Brother printer into the disc drive of your Macintosh computer. The automated install wizard should start up automatically so just follow the on-screen instructions in order to install the necessary software and drivers.

Once all that is done, simply open up the ‘System Preferences’ option from the ‘Apple’ menu located at the top left hand corner of your screen. Then select ‘Print & Fax’ from the first window which pops up, and then click on ‘Add Printer...’ from beneath where it says “Printers & Scanners” over at the left side of this window. Once you click this button, a list of printers (both locally connected ones as well as networked ones) should appear for selection purposes - simply choose your Brother model name from among this list and press continue in order to successfully install that printing device onto your Mac computer system!

Once everything is configured properly, all that remains is for you to go ahead and take a trial run by printing out something small just to check and make sure everything works alright – however now that all has been said & done connecting a Brother printer couldn't be simpler from an Apple device!

What are the steps to setup a Brother printer on Mac?

Having a Brother printer at home can be convenient in a variety of ways; from printing family photos to work documents, you don’t need to wait for your next trip to the store. Setting up a Brother printer with a Mac computer, however, may seem like a daunting task. Fortunately, it’s easy and straightforward if you follow the steps below.

First, switch on your Brother printer and connect it to your WiFi network. You can use the built-in LCD panel or use the software your manufacturer provides to do that. Next, launch System Preferences on your Mac by clicking on the Apple logo in the upper left corner of your desktop screen. Then select Printer & Scanners under Hardware and click on ‘+’ at the bottom of the list. You will see all available printers which you can select by clicking Add Printer or Scanner button. Finally, select your printer from the list and click Add to finish setting it up with Mac OSX machine.

You are now able set up jobs such as scanning documents or printing photos without having to visit a store or wait for our document delivery orders! If issues arise during these setup steps, be sure to verify that both devices are connected to same network and that required drivers are installed properly before trying again. Following these setup steps will save you time and frustration in no time!

How do I install Brother printer drivers for Mac?

Installing Brother Printer drivers on a Mac computer can be done through an easy-to-follow process. Whether you’ve bought a brand new printer or have an existing one, setting up the drivers on Mac is a straightforward task. Here’s what you need to do for successful installation:

The first step is to download the driver from Brother’s official website. Depending on your printer model, you can choose from different software versions. Download the relevant installer and save it on your computer.

Once downloaded, navigate to the folder where you saved it and double-click on it to begin installation. You will be given instructions throughout the setup wizard, so just follow them as they appear on screen until they disappear after successful installation of the driver. After this, open System Preferences in your Mac and search for Printers & Scanners in its menu. When your printer name is visible on this list of available printers, click it as well as select ‘Use Printer Online’ (if applicable).

If everything went well thus far then printing should already be successful. If not then open System Preferences once again and click ‘Add Printer or Scanner’ option at the bottom of the window that follows soon after opening Printers & Scanners section again from its menu. Then select ‘Change Options’ option near the created printer name and make other changes if necessary before proceeding just like before until no further errors are encountered while printing documents/papers or pictures requiring printouts using your Brother printer connected over Mac setup!

What are the steps to connect Brother printer with Mac via WiFi?

Having a wireless printer is becoming increasingly popular due to the convenience of being able to print from any device connected to the same wireless network. This is especially useful when using devices such as Mac computers, which make use of the powerful features of Apple’s OS X operating system. To help you get started with connecting your Brother Printer with Mac through WiFi, below are some simple step-by-step guidelines to follow.

Step One: Getting Prepared.

Before you begin setting up your printer and computer, it is important that you have all necessary materials available. This includes an active WiFi connection, an Ethernet cable, and the setup CD or driver disc that came with your printer. Make sure your printer is turned off throughout this process.

Step Two: Connecting the Printer.

Get your Ethernet cable and plug one end into the back of your printer in the port labeled ‘LAN’ or ‘Ethernet’. Plug in the other end into your router or modem and then turn on your Brother Printer. Open System Preferences on Mac and you should see a new window labeled ‘Printers and Scanners’. Click on it so you can start adding a new device/printer.

Step Three: Installing Printer Software.

Once System Preferences detect the new device, a window will open where you can choose to install recommended Apple software for Brother printers if desired. If desired, go ahead and install this software first before downloading manual drivers from Brother’s website if they don't appear automatically after installation completes.

Step Four: Adding Printer to Network  After installation of recommended or manual software is done, select 'Add Device' and search for any available wireless networks that match what appears in your WiFi settings; if no networks appear under 'Setup New Device', click 'Add Wi-Fi Network' at bottom of list and enter details manually (name & password) of network you want to connect it to.

Step Five: Test & Settings Configuration    At this point, print a test page manually from within settings menu once installation has completed successfully; test printing should be successful afterwards; however if this doesn't work, go back into settings menu by clicking 'Printers & Scanners' icon while still inside System Preferences window and adjust any additional settings (required). After all settings are configured properly go ahead & start enjoying all features provided by Brother's networked enabled printers!

How can I configure my Brother printer for Mac?

First, you must determine if your Brother printer is compatible with Mac or not. You can find this information on the Brother website by searching for your printer model and the "specifications" tab. Once you have determined compatibility, you can start configuring your printer for Mac.

To get started, you will need to connect both the printer and your Mac computer to the same wireless network. Then open the system preferences menu on your Mac and select “Printers and scanners” from the menu bar. Press “+” to add a device then select “Brother” from the list of supported device types.

From there, you will be prompted to install drivers specific to your model of Brother Printer if they are not already installed on your machine. If so, you can skip this step and click the “add” button to proceed with installation.

Once completed, your Brother Printer should be successfully configured for use on your Mac computer! To make sure everything is working properly, try printing a test page or file before setting up a more complicated job. And of course – make sure you have all necessary supplies like replacement ink cartridges and paper!

What should I do to set up a Brother printer on macOS?

Setting up a printer on a Mac operating system can be daunting, but with the right knowledge it can be quick and easy. To get your Brother printer connected to your MacBook or other Mac device, follow these simple steps:

First off, you’ll need to install the correct drivers for your distinctive model of Brother printer. To do this, use the Brother Support Centre to download and install the correct set up file. Then locate your USB cable, or connection wire if applicable, and connect the printer to your Mac device. Once proper connection has been made between your Mac and the printer, your Mac should automatically detect that a new printer has been fitted. Go ahead and open System Preferences from the Apple menu found on the top left side of the screen.

Once you are in System Preferences find and click on Printers & Scanners. You will then see its panel with a list of all available nearby printers; hit on ‘Add Printer or Scanner’ for selecting another one. From here, ensure that you select ‘Brother’ under Manufacturer section and click on Next button followed by selecting your exact model when prompted (you may have access to more than one choice due to drivers installed earlier). If necessary enter username and password found within the manual supplied with the printer when asked then select Add – you should now have a green symbol near it which means that this is currently in use! And that’s it – you have successfully set up your new Brother Printer on macOS!

Knowing how to use technology is key in today's digital world, so following these easy steps will enable anyone to set up their Brother Printer quickly and easily.

How do I add a Brother printer to Mac OS X?

Adding a brother printer to Mac OS X is quite a simple task with a few steps, and this blog post will explain exactly what you need to do.

First, you must locate the USB port on your Mac that the printer cable should be connected to. Once the cord is plugged in, your computer will automatically recognize the printer, and you are now ready to install any necessary software or drivers that your printer may require. The installation CD included in the box with your printer should make this part of the setup a breeze!

When you’re finished installing software and drivers, go ahead and navigate to System Preferences on your computer. From here, click on Printers & Scanners where you can add a new printer by clicking the ‘+’ symbol. Your Brother Printer should show up in the list of available printers if it is connected properly. Click ‘Add’ and then select it from your list of available printers! Now follow any additional instructions for setup such as naming the printer, selecting where it’s located etc.

That’s all there is to adding a brother printer to Mac OS X! With these easy six steps, you have successfully set up your Brother Printer with your Mac computer in no time at all. Enjoy printing easily from now on!

Featured Images:

Profile photo of Danny Orlandini

Danny Orlandini

Writer at Go2Share

View His Articles

Danny Orlandini is a passionate writer, known for his engaging and thought-provoking blog posts. He has been writing for several years and has developed a unique voice that resonates with readers from all walks of life. Danny's love for words and storytelling is evident in every piece he creates.

View His Articles