Assuming you are printing with 1.75mm PLA filament on aMakerBot Replicator 2X printer:
With 1kg of filament, you can print 143 spools of filament, each containing approximately 328.5g of filament. This would yield 45,712g of filament, or approximately 101.6 miles (163.5km) of filament. This should be enough to print approximately 2,036 average-sized prints, assuming you have enough spools to store the filament.
How long will 1kg of filament last me?
Assuming you are using 1kg of PLA filament, it should last you around 160 hours of printing. This is based on the assumption that you are printing at a rate of 50 grams per hour, which is a fairly standard printing speed. calculated using this method, it would cost you around $27.50 to print with 1kg of PLA filament.
What is the average weight of a print made with 1kg of filament?
Assuming you are talking about 3D printing, the average weight of a print made with 1kg of filament can range from 300 to 700 grams. This obviously varies depending on the size and density of the object being printed. In terms of weight, the average 3D printed object is probably around 500 grams.
How much does it cost to print with 1kg of filament?
It costs about $9 to print with 1kg of filament.
How much does it cost to print 1kg of filament?
It depends on the filament, but printing 1kg of filament can cost between $30 and $60. The cost of the filament is usually between $20 and $40 per kilogram, and the cost of the printer is usually between $10 and $20 per kilogram.
Frequently Asked Questions
How much can you 3D print with 1kg of filament?
With 1kg of filament, you can expect to print around 963.5 pieces.
How many pieces can you 3D print with a 1 kg spool?
There is a small percentage of loss between printed pieces and loading the filament; so, realistically what you can print with a 1 kg spool is around 100-300 small prints.
How much material does it take to print 1 Kgs?
1 kg of material will print around 1 kg of prints minus any material used for your anchor line and priming the nozzle.
How much filament do I need to print with Cura?
In general, you will need about 1 kg of filament for a successful printing job with Cura.
How many 3D model pieces can you print from 1kg of filament?
Generally speaking, a 3d printer can print about 1kg of pieces from filament. However, it also depends on many other factors such as the nozzle size, type of 3d model, complexity, and so on. So Frankfurt based company RepRap creates a detailed infographic to answer this question in more detail