
Golang Notebook is a powerful tool for Go programmers, allowing you to write, execute, and share code in a notebook-like interface.
It's based on the popular Jupyter Notebook project, which provides a flexible and interactive way to work with code.
Golang Notebook supports popular Go frameworks and libraries, including Revel and Gin.
You can write code in a variety of languages, including Go, and execute it in the notebook.
Golang Notebook is designed to be easy to use, with a simple and intuitive interface that makes it easy to get started.
The notebook interface allows you to write code, run cells, and view output all in one place.
Golang Notebook is a great tool for learning Go, experimenting with new ideas, and collaborating with others.
Take a look at this: Interfaces in Golang
Installation
Installation is relatively straightforward. gophernotes is available for Linux and macOS, but if you're on Windows, you can use WSL or Docker.
You can install gophernotes using standard Go tools on Linux and macOS. This involves setting the GOBIN directory, adding it to your PATH, and running gonb --install.
For a quick installation on Linux or macOS, you can use the following commands: go install golang.org/x/tools/gopls@latestgo install golang.org/x/tools/gopls@latestgo install gonb@latestgonb --install Once installed, restart Jupyter to begin using GoNB in your notebooks.
Additional reading: Golang Tools
Prerequisites
To start the installation process, you'll need to meet a few prerequisites.
First and foremost, you'll need to have Go 1.13+ installed on your system, including GOPATH/bin added to your PATH, which allows you to run Go binaries that you install.
To run Go binaries, your PATH must include GOPATH/bin, which is usually added automatically when you install Go.
You'll also need to have a Jupyter Notebook or nteract installed, which will be used for interactive coding and exploration.
If you don't have git installed, you can download it from the official website at https://git-scm.com/download.
Here's a quick rundown of the prerequisites:
- Go 1.13+
- Jupyter Notebook or nteract
- git
Make sure to download and install git if it's not already present on your system, as it's a crucial tool for version control.
Install Linux and macOS
For Linux and macOS, you can install GoNB in a few simple steps. GoNB only works on these operating systems, so if you're on Windows, you'll need to use WSL or Docker.
To install GoNB, you'll need to install Go first. Go maintains a GOBIN directory, where it compiles programs and puts them. You should add this directory to your PATH.
You'll also need to install GoNB, goimports, and gopls. These can be installed using the standard Go tools, and you can find instructions on how to do this in the official Go tutorial. Once you've installed them, run gonb --install.
If you're using JupyterLab or Jupyter Notebook, you can install GoNB as a kernel in the Jupyter configuration. Just make sure that the GOBIN directory is in your PATH, and then run the necessary command.
In GitHub's Codespace, if Jupyter is already started, you'll need to restart the Docker container. This will also restart Jupyter, so you can start using GoNB in your notebooks right away.
Suggestion: Golang Ci Linter Install
Setting Up Jupyter Kernel for Go
To set up a Jupyter kernel for Go, you'll need to install Gophernotes. This can be done using the command `go get -u github.com/cjimti/gophernotes`.

You should then configure Jupyter to recognize Gophernotes as a kernel by ensuring the paths in the kernel.json file point to the correct Gophernotes installation.
To register the Gophernotes kernel with Jupyter Notebook, run the command `jupyter kernelspec install gophernotes`.
The following prerequisites are required: Go 1.13+ with GOPATH/bin added to your PATH, Jupyter Notebook or nteract, and git (usually already present on Linux and Mac OS X).
Limitations and Troubleshooting
gophernotes has some limitations that you should be aware of. It doesn't support importing third-party packages when running natively on Windows.
Some corner cases on interpreted interfaces aren't implemented yet, including interface -> interface type switch and type assertion. This means that certain code might not work as expected.
Conversions from/to unsafe.Pointer are not supported, so be careful with that. Goto is only partially implemented, which might cause issues in certain situations.
Creation of new named types is emulated, and their methods are visible only to interpreted code. This can lead to some unexpected behavior.
Readers also liked: Golang Types
Here are some of the known limitations in more detail:
- Importing third-party packages when running natively on Windows
- Some corner cases on interpreted interfaces
- Conversions from/to unsafe.Pointer
- Goto is only partially implemented
- Creation of new named types is emulated
Out-of-order code in the same cell is supported, but it's not heavily tested and has some known limitations for composite literals. If you're experiencing issues with this, it's best to stick to the usual order of operations.
To work around the limitation of converting from typed constant to interpreted interface, simply assign the constant to a variable, then convert the variable to the interpreted interface type.
Highlights and Features
GoNB is a powerful tool that offers a range of features to enhance your Go development experience. It provides a complete Jupyter kernel, allowing you to explore Go code and data in a robust and efficient way.
One of the standout features of GoNB is its ability to cache results between notebook cells, enabling you to iteratively develop code and explore data more quickly. This saves you valuable time and effort.
GoNB also integrates with gopls, offering auto-complete suggestions and contextual help as you write your Go code. This feature is a game-changer for developers who want to write code quickly and accurately.
The kernel also provides rich contextual information to help you identify and resolve compilation errors. This is a huge improvement over basic error messages, which can be frustrating and time-consuming to deal with.
GoNB supports a wide range of media types, including images, HTML, and multimedia content. This allows you to create engaging and interactive data visualizations that will help you communicate your ideas more effectively.
Here are some of the key highlights of GoNB:
- Auto-complete and contextual help while coding.
- Rich content display: HTML, markdown (with latex), images, javascript, svg, videos, etc.
- Uses standard Go compiler: 100% compatibility with projects, even those using CGO.
- Faster execution than interpreted Go.
- Supported by Jupytext: it allows one to write the notebook as a normal Go file, and use Jupytext to convert to a notebook.
- Run cell's Test* and Benchmark* functions with go test.
- Support for go.mod and go.work, to allow local development.
- Debug using gdlv, a GUI for the delve debugger.
- Shell command executions with !.
- Reported to work with Github Codespace, VSCode, Binder, Google's Colab, etc.
- Very well documented and supported.
- Includes a pre-built docker, that includes JupyterLab and GoNB.
Installation Methods
GoNB is a fantastic tool for Go developers, and installing it is relatively straightforward. You can install it on Linux and macOS, but it's not directly available for Windows, unless you're using WSL or Docker.
To install GoNB on Linux or macOS, you can use standard Go tools, which is a great feature. Go maintains a GOBIN directory that you can set, and go install will compile programs and put them there.
You'll need to add the GOBIN directory to your PATH, which is a list of directories that your system searches for executables. To do this, you'll need to install GoNB, goimports, and gopls, which provides auto-complete.
To install these packages, run gonb --install, and if you're using JupyterLab or Jupyter Notebook, you can also install GoNB as a kernel in the Jupyter configuration. This will give you access to GoNB's features in your notebooks.
Alternatively, you can find the gonb binary in your filesystem, which is usually located in $HOME/go on macOS and Linux, or %USERPROFILE%\go on Windows, and run ./gonb --install in that directory.
Getting Started
You can test out the gophernotes Golang kernel by downloading and altering this article.
To get started, simply download the notebook file from the given link: https://raw.githubusercontent.com/cjimti/mk/master/notebooks/GolangToJupyter.ipynb.
Introduction
Are you a data scientist, machine learning enthusiast, or software developer looking to supercharge your Jupyter notebook experience? GoNB is an innovative Jupyter notebook kernel that brings the full potential of Go to the world of interactive computing.
GoNB is designed specifically for Jupyter notebooks, allowing you to harness the speed and efficiency of the Go language in an interactive environment.
Start with Go
To get started with Go, you can test out the gophernotes Golang kernel by downloading and altering this article here: https://raw.githubusercontent.com/cjimti/mk/master/notebooks/GolangToJupyter.ipynb.
You can also discover the magic of GoNB, which integrates Go's rapid compilation speed, enabling interactive code exploration right within the notebook cells.
Setting up GoNB is a breeze, and it's open-source, welcoming contributions from the community. You can find the project on GitHub, where you can report issues, share success stories, or lend a hand with improvements.
To install GoNB, you'll need to install go programs using the official tutorial, which is pretty simple. Go maintains a GOBIN directory, and go install will compile programs and put them there.
Here are the steps to install GoNB as a kernel in Jupyter configuration:
- Install Gophernotes, which is a Go kernel for Jupyter Notebooks.
- Configure Jupyter to recognize Gophernotes as a kernel.
- Ensure that the paths in the kernel.json file point to the correct Gophernotes installation.
- Create a new notebook and choose the Gophernotes kernel from the “Kernel” menu.
By following these steps, you'll be able to start using GoNB and explore the world of Go programming.
GoNB Power and Examples
GoNB's unique Read-Compile-Run-Print-Loop (RCRPL) approach integrates Go's rapid compilation speed, enabling interactive code exploration right within the notebook cells.
With GoNB, you can combine the simplicity and efficiency of Go with the interactive capabilities of Jupyter notebooks, making it an ideal choice for building data analysis tools, experimenting with machine learning models, or creating high-performance applications.
GoNB empowers you to explore and experiment effortlessly, thanks to its instant feedback, making it a game-changer for developers who want to speed up their development process.
Special Commands
Go code can be combined with special commands to achieve more functionality. These special commands must be on a line by themselves.
You can change the current working directory with the %cd command followed by the desired path. This is useful for navigating to specific locations within your project.
Here are the special commands supported by GoNB:
- %cd [path] - changes the current working directory
- %go111module {on|off} - enables or disables Go 1.11 module support
- %help - displays a list of available commands and their usage
- $ shell_command [args...] - executes a shell command with optional arguments
These special commands can greatly enhance your productivity when working with GoNB.
GoNB Power
GoNB Power is all about unlocking the full potential of the Go programming language in the Jupyter notebook environment. With GoNB, you can say goodbye to tedious waiting for code execution and hello to instant feedback.

GoNB's unique Read-Compile-Run-Print-Loop (RCRPL) approach integrates Go's rapid compilation speed, making it an interactive playground for Go developers. This means you can write your Go code, get immediate feedback, and explore data without the usual wait times.
GoNB's caching feature between notebook cells allows you to iteratively develop code and explore data more efficiently. This is a huge time-saver, especially when working on complex projects.
Here are some of the key features that make GoNB so powerful:
- Complete Jupyter Kernel: GoNB provides a robust set of functionalities for exploring Go code and data.
- Efficient Cached Results: GoNB's cache helps you work more efficiently by saving valuable time and effort.
- Contextual Help and Auto-Complete: GoNB integrates with gopls to offer auto-complete suggestions and contextual help.
- Insightful Error Context: GoNB provides rich contextual information to help you quickly identify and resolve compilation errors.
- Rich Media Support: GoNB supports images, HTML, and multimedia content for engaging and interactive data visualizations.
- Widgets for Interaction: GoNB's interactive widgets enable you to create dynamic data visualizations with user input.
With GoNB, you can unleash the power of Go in the Jupyter notebook environment, making it an ideal choice for building data analysis tools, experimenting with machine learning models, or creating high-performance applications.
Example
In the world of GoNB, making HTTP client calls is a breeze. You can execute Golang code directly in the Jupyter Notebook, which is a game-changer for developers.
To get started, you'll need to set a variable using Golang's implicit assignment operator ":=". This is a simple yet powerful way to assign values to variables.

You can then use the new variable in an HTTP client call. For example, you can use the "post" variable in a call to demonstrate the functionality of GoNB.
If you want to share your work with others, you have several options. You can save the Notebook as HTML, or use a site builder like Jekyll or Hugo to transform the content into a format that fits your site. Some other options include:
- Providing the Notebook for download.
- Linking to Jupyter's nbviewer.
- Exporting the Markdown file.
You can run, modify, or extend this article in a Jupyter Notebook server on your local workstation.
Docker and Linux
You can use a pre-built Docker image to set up GoNB with JupyterLab. This image includes GoNB and JupyterLab, making it a hassle-free setup option.
To access JupyterLab, go to a directory that you want to make available to the Jupyter notebook, and it will be mounted on the host/subdirectory in JupyterLab.
You can customize the Docker by running an arbitrary script at startup as root, which allows you to install any dependencies you need.
Linux or FreeBSD
If you're running Linux or FreeBSD, you're in luck because the instructions for installing and setting up Docker are the same for both operating systems.
The instructions for installing Docker are straightforward and can be completed using one of two methods: quick installation as a module or manual installation from GOPATH.
You can confirm that the gophernotes binary is installed in GOPATH by executing it directly, and you should see the installation confirmation.
Note that if you have the JUPYTER_PATH environmental variable set or if you're using an older version of Jupyter, you may need to copy the kernel config to another directory.
Docker
Docker is a fantastic tool for setting up GoNB, and it's surprisingly easy to use. You can start by using the pre-built Docker image that includes JupyterLab and GoNB.
To get started, you'll need to copy the URL provided by Docker into your browser. This will begin your journey exploring Go with GoNB.
If you're using Linux or macOS, you're in luck - Docker is available for you. But if you're on Windows, don't worry - you can still use Docker in WSL or inside a Docker container.
To customize your Docker setup, you can run an arbitrary script at startup as root. This allows you to install any dependencies you need. Just see the docker.md file for details.
To use Docker, you'll need to start Jupyter (if it's already running). And if you're using go.work, make sure you have gopls version 0.12.4 or later. You can check this with the command gopls version.
Here's an interesting read: Golang Version Manager
Install Linux and macOS with Go
You can install Go on Linux and macOS using standard Go tools. This method is pretty simple and straightforward.
First, you need to install Go, GoNB, goimports, and gopls. You can do this by running go install in your GOBIN directory, which you can set to a location of your choice.

To add the GOBIN directory to your PATH, you'll need to update your system's environment variables. This will allow you to run Go programs from anywhere in your terminal.
Once you've installed the necessary tools, you can install GoNB as a kernel in the Jupyter configuration. This works for both JupyterLab and Jupyter Notebook. Simply run gonb --install in your Jupyter configuration directory.
Alternatively, you can install GoNB by finding the binary in your filesystem and running ./gonb --install in that directory. If you're using GitHub's Codespace, you may need to restart the docker and Jupyter to get everything working properly.
Featured Images: pexels.com


