
Choosing the right outreach tool is crucial for making a good impression and getting a response from your target audience. According to a study, 72% of professionals prefer to be contacted via email, while 56% prefer LinkedIn messages.
If you're looking to reach a large number of people quickly, email is likely your best bet. Research shows that email open rates can reach up to 25% compared to LinkedIn message open rates, which average around 10%.
However, LinkedIn messages can be a more effective way to start a conversation, especially if you have a pre-existing connection with the person. In fact, 40% of LinkedIn users say they're more likely to respond to a message from someone they know.
See what others are reading: Why Is Linkedin Important
Email vs LinkedIn Message
Email and LinkedIn messages are two popular channels for outreach, but they have distinct differences. Cold emails land directly into the primary inbox of your prospects, unlike LinkedIn messages, which are limited to 1st-degree connections.
Readers also liked: Linkedin Azure
Here's a comparison of the two:
In terms of cost-effectiveness, cold emails are generally more affordable, allowing you to send up to 10K emails with a low cost, whereas LinkedIn messages require purchasing LinkedIn Sales Navigator or LinkedIn Premium.
If this caught your attention, see: Print Emails
Vs InMail: Which is Better?
When choosing between LinkedIn messages and InMail, consider the reply rate. LinkedIn message reply rate is lower compared to cold emails, which land directly into the primary inbox of your prospects.
InMail has a unique follow-up system, where you can only send follow-ups via InMail if you get a response from your prospects. This limits your follow-up potential compared to cold emails, which allow for automated scheduling.
LinkedIn messages have a velocity advantage, as you can send them to your connections and network. However, you can't send LinkedIn messages to 2nd-degree or 3rd-degree connections without a connection request being accepted.
Deliverability is a key factor to consider. Cold emails have a higher deliverability rate compared to LinkedIn messages, which may end up in the spam folder.
Check this out: Email Bounce Rate
Cost is another important consideration. Cold emails are generally more cost-effective, with the ability to send up to 10K emails with a low cost. InMail, on the other hand, requires a LinkedIn Sales Navigator or LinkedIn Premium subscription.
Data management is also a crucial aspect to consider. Cold emails provide more detailed reports and analytics, including open, click-through, bounce, and recipient sentiment rates. InMail offers premium insights with Sales Navigator.
Ultimately, the choice between LinkedIn messages and InMail depends on your specific needs and goals. However, if you're looking for a more cost-effective and scalable solution, cold emails may be the better choice.
Here's a comparison of the two:
Remember, the key to success lies in understanding your audience and choosing the right channel for your outreach efforts.
Craft a Compelling Subject Line
Crafting a compelling subject line is crucial to get your email opened. Your subject line should be captivating and outstanding, piquing the reader's curiosity in seconds.
Ideally, the subject line should be 6 to 8 words with clarity and value. Using cold email automation software like Saleshandy allows you to use features like merge tags and variable merge tags.
With these customizing features, you can create a compelling subject line with relevant details of the recipients to target your email with better credibility.
Advantages and Disadvantages
Cold email and LinkedIn messages both have their advantages and disadvantages. Cold email is cost-effective, scalable, and allows for personalization, but it's easy to ignore and has lower engagement rates. LinkedIn messages, on the other hand, have higher engagement rates and allow for targeted outreach, but they can be limited by LinkedIn's connection request and InMail credits.
Here are the key differences in a table:
Ultimately, the choice between cold email and LinkedIn messages depends on your specific needs and goals.
Advantages
Cold email outreach offers several advantages, including cost-effectiveness, scalability, and personalization. You can reach more than 10K prospects daily with cold emails, and send a hyper-personalized cold email message with personal and business details to start the business conversation.

A good email outreach software will let you tailor your messages using first names, company details, and past interactions, making it ideal for large-scale outreach. You can also use email tools to send a detailed explanation of your value proposition, which is not possible with LinkedIn messages.
Emails are more scalable, meaning you can expand your campaign to reach more and more people. You can also use automation to send bulk yet personalized emails, making it a low-pressure marketing channel.
Email automation and marketing platforms provide valuable analytics about your outreach performance, such as open rates, click-through rates, and bounce rates. You can use these metrics to gauge and improve your campaign.
Here are some of the key advantages of cold email:
- Cost-effectiveness: Low initial investment with affordable tools and domains
- Scalability: Easily scale by adding new domains and leveraging email tools
- Personalization: Tailor messages to specific needs, interests, and pain points
- Low barrier to entry: Easy to set up and start sending email
You can also use email to send a formal and structured message, which some prospects prefer. Email also allows for integration with CRMs, making follow-ups and lead tracking easier.
Emails are more versatile, supporting diverse content, from plain text to rich multimedia. You can include links to your website, attachments like PDFs, or even embed images and videos to make your message more engaging and informative.
Response Time vs. Audience Preference

Response Time vs. Audience Preference is a crucial consideration when deciding between cold email and cold LinkedIn message. LinkedIn tends to generate faster responses because it's a real-time platform.
People check their notifications frequently, and messages often prompt immediate action. Emails, on the other hand, have a lower response rate, but they reach a much wider audience.
It's a good idea to use cold email vs cold LinkedIn message depending on which platform your audience is more active on. Some industries and roles are more responsive to email, while others prefer LinkedIn.
Executives might prefer email for its professionalism, while younger professionals might engage more on LinkedIn. Understanding where your audience spends their time can help you make an informed choice.
Worth a look: Google Cloud Platform Email
Professional Network and Outreach
You can leverage LinkedIn's professional network to connect with prospects, build relationships, and generate leads through LinkedIn outreach. This method includes sending connection requests, direct LinkedIn messages, and InMails.
To increase the chances of acceptance, always send a connection request on LinkedIn with a personal note. Mention why you are interested in connecting with the recipient and add a personal detail regarding their featured post, role change, or recent achievement.
With LinkedIn outreach, you can target specific prospects using LinkedIn's search capabilities and create content to attract inbound leads. You can also network in groups and send LinkedIn InMails to personalize your outreach.
Here's a comparison of the key elements of email outreach and LinkedIn outreach:
By using LinkedIn outreach, you can avoid the limitations of cold email outreach, such as spam filters and inbox overload. You can also automate your outreach using tools like Dripify, which can help you find prospects, send connection requests, and send messages.
Related reading: How to Send Mass Email from Outlook
Outreach
Outreach is a crucial part of professional networking, and there are several methods to choose from. LinkedIn outreach is a great way to connect with prospects, build relationships, and generate leads, leveraging LinkedIn's professional network.
You can send connection requests, direct LinkedIn messages, and InMails to prospects. LinkedIn messaging and outreach take place entirely within the platform, making it a one-stop shop for B2B networking.
With LinkedIn outreach, you can target specific searches, create content to attract inbound leads, and network in groups to expand your network and connect with potential leads.
To choose between emails, LinkedIn messages, and InMails, consider the following criteria: they are limited to 300 characters, requests without notes get a higher acceptance rate, and you can't use the following hack if you write notes.
Here are some key elements to consider when sending a connection request:
- Always send a connection request with a personal note to increase the chances of acceptance.
- Mention why you are interested in connecting with the recipient.
- Add a personal detail regarding the prospect's featured post, role change, or recent achievement.
Personalization is key in outreach, and LinkedIn offers real-time personalization based on profile information and recent activity. You can also personalize emails with custom fields, such as tailored subject lines and detailed content.
However, LinkedIn gets a distinct edge in personalization due to the wealth of information available on prospect profiles. You can tailor your messages to their roles, achievements, and shared connections.
In contrast, cold email outreach is when you send unsolicited emails to prospects with whom you have no prior connection. You can personalize email body content by mentioning the recipient's personal details or business information.
To create a successful outreach strategy, plan a follow-up sequence and use tools like Saleshandy to automate scheduling follow-up emails after legitimate intervals of days and weeks.
By considering these factors and using the right tools, you can create a effective outreach strategy that helps you connect with prospects and build meaningful relationships.
On a similar theme: Backup Emails Outlook Web
Optimize Your Profile
Your LinkedIn profile is often the first impression you make on a prospect, so it's essential to optimize it for success. Your profile should be up to date and present all the information in an appealing way.
Your prospect will visit your profile immediately after being convinced by the initial or follow-up messages, so it's crucial to make a good impression. This means ensuring that whatever value you are promising to offer to the prospect reflects on your personal profile or the company's profile page.
If your outreach message and the information on your profile contradict each other, the prospect will never convert. This can be a major turn-off and can damage your professional reputation.
See what others are reading: Why Is Email so Important to Modern Communication
Message Delivery and Follow-up
Message delivery and follow-up are crucial steps in email or LinkedIn message marketing. On average, 95% of leads reply after the 7th follow-up email.
To maximize your chances of getting a response, it's essential to have a follow-up strategy planned before sending the connection request. Sending 2 to 3 follow-up messages after the initial message in an equal time gap is a good rule of thumb.
You can only send LinkedIn direct messages to your first-degree connections, the people you are already connected with on LinkedIn. This means you get only one shot to get a reply from your prospect, making every message count.
Here's a summary of the number of follow-ups needed for email and LinkedIn message follow-ups:
Remember, consistency is key, and giving value in each message is crucial to establishing credibility with your prospect.
Deliverability
Deliverability is key to getting your messages seen by the right people.
If you're sending LinkedIn messages or InMail, you're in a better position than with emails, since they don't go through a spam filter.
To ensure your emails don't end up in the spam folder, set up DNS Records (DKIM, DMARC, SPF), use a reputable provider like Gmail, keep a clean email list, warm up your mailbox, and maintain good open and reply rates.
You can test your email deliverability using Glockapps.
LinkedIn InMail messages let you land directly into people's inboxes without sending a connection request.
Follow-up
Follow-up is a crucial step in message delivery and outreach. On average, 95% of leads reply after the 7th follow-up email.
Most prospects engage with an agency after the second or third follow-up, not the initial email, making it essential to have a planned follow-up strategy.
You can only send LinkedIn direct messages to your first-degree connections, the people you are already connected with on LinkedIn. This limits your follow-up options on the platform.
Sending too many LinkedIn messages in a few days can overwhelm your recipient, so it's best to keep adding a new value point with each follow-up message to establish credibility.
A good follow-up strategy involves sending 2 to 3 follow-up messages after your initial message in an equal time gap. This can help increase the chances of getting a response from your prospect.
Here's a summary of the benefits and disadvantages of different follow-up methods:
Using a tool like Saleshandy can help you automate scheduling follow-up emails after legitimate intervals of days and weeks, making it easier to stay on top of your follow-ups.
Personalization and Automation
Personalization is key when it comes to making a good impression on your prospects. You can personalize email body content with merge tags and Spintax, features available on cold email automation software like Saleshandy. This allows you to create multiple variants and conduct A/B testing to determine which emails perform best.
You can also personalize LinkedIn messages with real-time information from a prospect's profile. This makes LinkedIn perfect for quick personalization and relevance. However, email wins for depth in personalization. Personalization can be achieved through custom fields, tailored subject lines, and detailed content.
Automating follow-up tasks can help you send timely follow-ups, track opens and responses, and manage your outreach at scale. You can use LinkedIn automation and email sequencing software to streamline your workflow and personalize your messages. For example, you can use Octopus CRM LinkedIn automation tool to automatically find your ideal prospect and send them a personalized connection request.
Additional reading: Azure Send Email
Personalize
Personalizing your messages is crucial for getting a response from your prospects. You can personalize emails with custom fields, such as tailored subject lines and detailed content.
Using merge tags and Spintax in cold email automation software like Saleshandy allows you to create subject lines and email copies that are both relevant and unique.
The content guide feature on Saleshandy's cold email outbound outreach software helps you write cold emails confidently.
You can also personalize LinkedIn messages with real-time personalization based on profile information and recent activity.
Here are some ways to personalize your messages:
- Use custom fields in emails, such as tailored subject lines and detailed content.
- Personalize LinkedIn messages with real-time data from profile information and recent activity.
- Mention the recipient's recent accomplishments or mutual interests in your email.
- Use a personal note when sending a LinkedIn connection request.
By personalizing your messages, you can make them more relevant and remarkable, increasing the chances of getting a response from your prospects.
Automate Sales
You can automate multichannel outreach using tools like LaGrowthMachine, which can build a sequence combining LinkedIn, email, and InMails. This tool is connected directly to CRMs like HubSpot or Pipedrive.
Automation tools are not limited to email outreach; they can also be used for LinkedIn. Using LinkedIn automation and email sequencing software, you can streamline follow-up tasks without sacrificing personalization.
With Dripify sales automation software, you can manage multiple outreach channels and send personalized emails and LinkedIn messages at scale. This software combines cold email and LinkedIn messaging into a single workflow.
Dripify allows you to create workflows like: a prospect accepts your LinkedIn invite → Automatically send a follow-up message; If they don’t reply in 3 days → Trigger a cold email with tailored information; If they open the email but don’t respond → Send another LinkedIn message or a second cold email.
Octopus CRM LinkedIn Automation Tool simplifies LinkedIn outreach through the automation of connection requests, profile visits, endorsements, message sequences, and follow-ups. This tool provides valuable insights into your campaigns, making it easier to track key metrics.
Recommended read: How to Send Voice Text Messages
Here's a comparison of the tools mentioned:
These tools can help you automate sales and personalize your outreach efforts, allowing you to connect with prospects more effectively and achieve better outreach results on LinkedIn.
On a similar theme: Email Outreach Link Building
Best Practices and Optimization
Cold emailing is the most prevalent outbound outreach channel, meaning everyone pitches their products and services over email.
To avoid landing in the spam folder, you should ensure your cold email doesn't contradict your LinkedIn profile. Optimize your LinkedIn profile to present all the information in an appealing way.
Your prospect will visit your profile immediately after being convinced by the initial or follow-up messages, so make sure whatever value you are promising to offer to the prospect reflects on your personal profile or the company's profile page.
Best Practices for Work
Cold emailing is the most prevalent outbound outreach channel, meaning everyone pitches their products and services over email.
To ensure your cold email doesn't land in your recipient's spam folder, follow the best practices. Cold emails are an opportunity to position your business offering in the minds of your target audience, with whom you might have had zero interaction until now.
Cold emailing can be a game-changer for lead generation, but it requires effort to make it work. A cold email is a chance to introduce your business to potential customers who might not know about you yet.
To make your cold email stand out, position your business offering in the minds of your target audience. With a well-crafted cold email, you can generate more leads and increase conversions.
Best Practices for Workable Work
To make your outreach efforts workable, keep your message between 100 and 120 words to make it short, crisp, and impactful.
LinkedIn is not just a job portal, but also a platform for professional networking, lead generation, and cold outreach.
A message that's too long can be overwhelming, so aim for brevity to get your point across effectively.
By implementing these best practices, you can make your LinkedIn message outreach work wonders.
Data Management and Compliance
Data management can be a challenge, especially when it comes to email. Email data management is more difficult than LinkedIn messages and InMails, and when a lead changes company, it also changes email, requiring regular updates.
You can avoid this hassle with LinkedIn messages, which have a simpler data management system. The LinkedIn URL is public and doesn't change when your lead changes jobs, making it easier to keep track of contacts.
Sending identical emails to multiple addresses may be perceived as spam, but LinkedIn messages don't have this issue. To ensure relevance, you can change email templates, create new signatures, and segment your audience.
Here are the key differences in data management between email and LinkedIn messages:
- Email data management: more difficult, requires frequent updates when leads change jobs
- LinkedIn message data management: simpler, LinkedIn URL doesn't change with job changes
Compliance is also a concern, especially with cold emails that come with legal risks like GDPR and CAN-SPAM. LinkedIn messaging avoids these hurdles, making it a safer option in regulated industries.
Data Management
Data management can be a challenge, especially when it comes to email. Email data management is more difficult than LinkedIn messages and InMails because the email finder is not 100% sure the email exists.
You'll often need to mark emails as catch-all emails, which means you're not entirely sure the email is valid. This can be frustrating, especially if you're trying to reach out to a lead.
On a similar theme: Picture Messaging Not Working
Updating your contacts regularly is crucial because people change jobs frequently. In fact, when a lead changes company, it also changes their email, so you need to stay on top of these changes.
LinkedIn data management is much simpler than email, thanks to the public LinkedIn URL. This URL doesn't change when your lead changes jobs, making it easier to keep track of them.
However, it's worth noting that LinkedIn members can edit their public LinkedIn URL, but you can get a unique ID that never changes. This can be a useful workaround if you need to keep track of your leads.
Sending identical emails to multiple addresses may be perceived as spam, so it's essential to change email templates and create new signatures to ensure your communications are relevant to each person's needs.
Compliance
Compliance is a crucial aspect of data management, and it's essential to understand the legal risks involved. Emails, particularly cold emails, can be a high-risk activity due to regulations like GDPR and CAN-SPAM.
Ignoring these guidelines can result in reputational damage or even legal issues. Staying informed is key to avoiding penalties.
In regulated industries, LinkedIn messaging is a safer option as it avoids the legal hurdles associated with cold emails. This makes it a popular choice for businesses operating in sensitive sectors.
Metrics and Benchmarks
A high open rate is not always a good thing, unless you also have a decent reply rate. According to Close, you should aim for a minimum of 30% open rate for your cold email campaign.
You can expect a response rate of 8.5% for outreach emails, but this increases to 13% if you do follow-up. In fact, 44% of salespeople give up after just one follow-up.
To give you a better idea, here are some cold email benchmarks:
On the other hand, LinkedIn messaging has a 30-40% connection request acceptance rate and an 18-25% reply rate. The conversion rate for LinkedIn messages is 2-5%.
It's worth noting that LinkedIn messages have a higher reply rate due to the platform's trusted and professional nature.
Relationship Building
Building relationships is key to success in sales and outreach. LinkedIn is a clear winner for building strategic professional relationships that could lead to opportunities down the road.
Using both email and LinkedIn messages can help you maximize your reach. Emails are less personal, yet they remain effective for initial outreach.
You can try out a smarter way to crush sales using automated tools, such as Dripify, which can give you results in less than 48 hours. This can be a game-changer for your sales team.
LinkedIn is a social platform, which means it thrives on interaction. This means you should be prepared to engage with others and build relationships.
To make the most of LinkedIn, consider starting with a free 7-day trial of Dripify, which can help you personalize your sales outreach.
If this caught your attention, see: Cold Emailing for Sales
Tools and Software
To streamline your outreach and get the best results, you'll want to consider using the right tools and software. Dripify Email and LinkedIn Automation Software is a great option, offering a 7-day free trial to get you started.
With Dripify, you can manage multiple outreach channels from a single dashboard, making it easy to send personalized emails and LinkedIn messages at scale. This automation software combines cold email and LinkedIn messaging into a single workflow.
Here's an example of a workflow you can create in Dripify: a prospect accepts your LinkedIn invite, and you automatically send a follow-up message. If they don't reply in 3 days, you trigger a cold email with tailored information. If they open the email but don't respond, you send another LinkedIn message or a second cold email.
Automation tools like Dripify can also help you optimize your outreach on both channels. By using LinkedIn automation and email sequencing software, you can streamline follow-up tasks without sacrificing personalization.
Here are some key benefits of using automation tools:
By combining cold email and LinkedIn messaging, you can get the best results and achieve your outreach goals.
Featured Images: pexels.com


