If you have a side-by-side and are looking to add a bit more clearance and protection to your engine, a radiator relocation kit can be a great option. Can-Am offers a wide variety of radiator relocation kits for their X3 model, which can be easily installed and will add some serious protection to your engine.
The first step is to remove the stock plastic front diffuser. This is easily done by removing the four bolts that hold it in place. With the diffuser removed, you will have better access to the engine and radiator.
Next, you will need to remove the stock radiator shroud. This is also easily done by removing the four bolts that hold it in place.
With the shroud removed, you will be able to see the stock radiator. You will need to remove the two hoses that are connected to it, as well as the two bolts that hold it in place.
Once the stock radiator is removed, you can begin installing the Can-Am radiator relocation kit. The first step is to install the new radiator onto the kit. This is easily done by following the instructions that come with the kit.
Next, you will need to install the new shroud. This is also easily done by following the instructions that come with the kit.
Finally, you will need to install the new diffuser. This is easily done by following the instructions that come with the kit.
With the Can-Am radiator relocation kit installed, you will have increased clearance and protection for your engine. This is a great way to make sure that your engine stays safe and protected, while also adding a bit of style to your side-by-side.
What is a can am x3 radiator relocation kit?
A can-am x3 radiator relocation kit is one of the most popular aftermarket upgrades for this highly popular UTV. Just like with any other vehicle, the engine in the can-am x3 produces a lot of heat while it is running. In order to keep the engine from overheating, the x3 is equipped with a radiator. The radiator is responsible for cooling the engine by circulating coolant through it.
The can-am x3 comes with a factory-installed radiator that is located in the front of the vehicle, behind the grille. While this location does a good job of keeping the engine cool, many x3 owners find that it does not offer the best possible airflow. This can lead to the engine overheating, especially when driving in hot weather or when driving off-road.
One of the best ways to improve airflow to the radiator is to relocate it to the rear of the vehicle. This is where the can-am x3 radiator relocation kit comes in. This kit moves the radiator from the front of the vehicle to the rear, behind the rear seats. This new location offers a number of benefits.
One of the biggest benefits of moving the radiator to the rear is that it allows for much better airflow to the radiator. This improved airflow will help to keep the engine cooler, especially in hot weather or when driving off-road. Additionally, this relocation kit also includes a new fan shroud that helps to direct even more airflow to the radiator.
Another benefit of the can-am x3 radiator relocation kit is that it helps to protect the radiator from debris. When the radiator is located in the front of the vehicle, it is more exposed to rocks and other debris that can be thrown up by the tires. By moving the radiator to the rear, it is out of the way of most of this debris. This can help to prolong the life of the radiator.
The can-am x3 radiator relocation kit is a simple upgrade that can offer a number of benefits. If you are looking for a way to improve the cooling of your x3, or if you want to protect your radiator from debris, this is a great option.
What are the benefits of using a can am x3 radiator relocation kit?
There are numerous benefits to using a Can Am X3 radiator relocation kit when modifying your UTV. First and foremost, relocating the radiator allows for increased airflow which will help keep your engine cooler, especially in hot weather or when riding at high altitudes. Additionally, the kit moves the radiator away from potential impact zones in the event of a rollover or collision, helping to protect it from damage.
Other benefits of using a Can Am X3 radiator relocation kit include improved aesthetic appeal and increased ground clearance. By moving the radiator to the rear of the vehicle, it frees up space in the front end for aftermarket lights, winches, or other accessories. And, by relocating the radiator up and away from the ground, it helps to prevent dirt, mud, and other debris from clogging up the radiator core and causing overheating.
Whether you are looking to improve the performance or appearance of your UTV, a Can Am X3 radiator relocation kit is a great modification to consider. With so many benefits, it’s no wonder that these kits are one of the most popular aftermarket additions for owners of this versatile off-road vehicle.
How do you install a can am x3 radiator relocation kit?
There are a few things you need to do in order to install a can am x3 radiator relocation kit. The first thing you need to do is remove the stock plastic shroud. You will need to remove the bolts that hold it in place. Once the shroud is removed, you need to remove the fan. The fan is held in place by four bolts. Two of the bolts are located on the back side of the fan. The other two bolts are located on the front side of the fan. Once the fan is removed, you will need to remove the radiator. The radiator is held in place by four bolts. Two of the bolts are located on the top of the radiator. The other two bolts are located on the bottom of the radiator. Once the radiator is removed, you need to remove the stock radiator support. The radiator support is held in place by four bolts. Two of the bolts are located on the top of the radiator support. The other two bolts are located on the bottom of the radiator support. Once the radiator support is removed, you can now install the can am x3 radiator relocation kit.
What are the dimensions of a can am x3 radiator relocation kit?
There are many radiator relocation kits available on the market, but the most popular and well-known is the Can-Am X3 radiator relocation kit. This kit is designed specifically for the Can-Am X3, and it is one of the most comprehensive and complete kits available. It comes with everything you need to relocate your radiator, including all of the necessary hoses and fittings, and it is easy to install.
The kit includes a high-quality aluminum radiator, which is much larger and more durable than the factory radiator. It also features an improved cooling capacity, which is essential for keeping your engine cool in even the most extreme conditions. The kit also comes with a new, larger radiator fan, which provides even more cooling power.
In addition to the new radiator and fan, the kit also includes all of the necessary hoses and fittings to complete the relocation. The kit is designed to be installed in just a few hours, and it comes with comprehensive instructions that make it easy to follow.
The Can-Am X3 radiator relocation kit is an essential upgrade for any X3 owner, and it is one of the best ways to improve the cooling capacity of your vehicle. If you are looking for a complete, easy-to-install kit, then this is the ideal option for you.
What is the weight capacity of a can am x3 radiator relocation kit?
A common question we get asked is, "What is the weight capacity of a Can-Am X3 radiator relocation kit?" The answer to that question largely depends on what kind of kit you have and how it is being used.
There are a few different types of radiator relocation kits available on the market. Some kits are designed for off-road use only, while others can be used for both on and off-road applications. The weight capacity of each kit will differ based on its design and intended use.
The weight capacity of a Can-Am X3 radiator relocation kit used for off-road applications only is approximately 300 lbs. This kit is designed to be used with a stock radiator. If you are using an aftermarket radiator, the weight capacity will be less.
The weight capacity of a Can-Am X3 radiator relocation kit used for both on and off-road applications is approximately 500 lbs. This kit is designed to be used with an aftermarket radiator. If you are using a stock radiator, the weight capacity will be less.
As you can see, the weight capacity of a Can-Am X3 radiator relocation kit can vary depending on the kit you have and how it is being used. If you have any questions about the weight capacity of your specific kit, please contact us and we would be happy to assist you further.
How does a can am x3 radiator relocation kit work?
A can-am x3 radiator relocation kit is designed to move the radiator away from the engine bay to improve cooling efficiency. The kit includes all the necessary hardware and instructions to relocate the radiator to the front or rear of the vehicle.
The first step is to remove the front or rear bumper, depending on which location you want to relocate the radiator to. Next, remove the plastic grill and headlight assembly. Now, remove the bolts that hold the radiator in place. Carefully pull the radiator out and set it aside.
Next, you will need to install the new radiator mounts. These will be specific to the location you are relocating the radiator to. Once the mounts are in place, bolt the radiator back into place.
Now, you will need to connect the radiator hoses to the new location. First, connect the upper radiator hose. There will be a hose clamp that you will need to loosen in order to do this. Once the upper hose is connected, do the same for the lower radiator hose.
Finally, you will need to reconnect the electrical wires to the radiator fan. Once everything is reconnected, you can now test the kit to make sure everything is working correctly.
What are the features of a can am x3 radiator relocation kit?
A radiator relocation kit is designed to move the radiator away from the engine, typically to the front or rear of the vehicle. This allows for better airflow and cooling of the engine, as well as protection of the radiator from debris. There are many different styles and designs of radiator relocation kits, but most kits will include the following components:
-Radiator: The core component of the kit, the radiator is responsible for cooling the engine by circulating coolant through its coils.
-Radiator mount: This mounts the radiator to the vehicle, typically using brackets that attach to the frame.
-Hoses: The kit will include high-quality hoses to connect the radiator to the engine, as well as any overflow hoses that may be needed.
-Water pump: A water pump is necessary to circulate the coolant through the system, and most kits will include a high-quality water pump.
-Thermostat: The thermostat helps to regulate the temperature of the coolant, ensuring that the engine does not overheat.
-Radiator cap: The radiator cap helps to maintain the correct pressure in the system and prevents the coolant from boiling over.
-Radiator overflow tank: This tank catches any coolant that may overflow from the radiator cap, and helps to maintain the correct level of coolant in the system.
What are the pros and cons of a can am x3 radiator relocation kit?
There are a few different types of radiator relocation kits for the Can Am X3, each with their own set of pros and cons. The most popular type is the front-mount kit, which moves the radiator from the stock location behind the engine to the front of the vehicle. This has the advantage of freeing up space behind the engine, making it easier to work on and preventing engine heat from damaging the radiator. However, it also means that the radiator is more exposed to debris and can be damaged more easily. Another type of kit is the rear-mount kit, which moves the radiator to the back of the vehicle. This has the advantage of protecting the radiator from debris, but can make it more difficult to access and can cause engine heat to damage other parts of the vehicle.
How much does a can am x3 radiator relocation kit cost?
A can am x3 radiator relocation kit typically costs between $250 and $500. This price range can vary depending on the specific kit and the retailer. Some kits may be less expensive, while others may be more expensive.
When it comes to selecting a can am x3 radiator relocation kit, it is important to consider the quality of the kit. Some kits may be made from cheaper materials, while others may be made from more durable materials. Selecting a kit made from durable materials will ensure that it lasts longer and can withstand more wear and tear.
It is also important to consider the installation instructions that come with the kit. Some kits may be easier to install than others. If installation is not something that you feel confident about, it may be worth paying a little extra to have a professional handle the installation for you.
No matter which can am x3 radiator relocation kit you ultimately choose, be sure to do your research and select a kit that is right for you and your vehicle.
Frequently Asked Questions
Is it better to mount the radiator higher or lower?
Mounting the radiator higher is generally recommended, as it will reduce the amount of mud, water or even snow that can come in contact with it. If the radiator gets too much of that it loses its purpose, which can therefore make the engine overheat - even if it does manage to get dirty
Do I need to relocate my Rad higher?
There is no one-size-fits-all answer to this question since everyone's rig will likely be different. However, if you're noticing that your rad is getting wet more often or colder air is passing through it more easily, increasing its height may be a good solution.
Should you add a radiator to your bike rack?
There is no right answer to this question as it will entirely depend on your individual needs and what type of bike you own. If you have a mountain bike, for example, then adding a radiator may be essential in order to keep you warm while cycling. Conversely, if you have a road bike that doesn’t require as much heating, then a radiator may not make too much of a difference. Ultimately, the best way to find out if adding a radiator is worth it for you is to take into account your specific needs and preferences when purchasing your bike rack.
What is included in a radiator relocation kit?
The radiator relocation kit includes a full set of instructions, color photos, and aluminum screen.
Where is the radiator mounted on a UTV?
The radiator is typically mounted at the rear of the vehicle.
