
Achieving broadcast-safe finishing in post-production requires attention to detail and a thorough understanding of the technical requirements.
To ensure your video is broadcast-safe, you need to meet the technical specifications for the broadcast platform, such as the EBU R 128 loudness standard.
The EBU R 128 standard limits the average loudness of a video to -23 LUFS, with a maximum of -1 LUFS for any 5-second block.
This means that your video needs to be mastered at a loudness level that's consistent throughout, without any sudden spikes or drops.
For more insights, see: Video Coding Experts Group
Broadcast-Safe Settings
To ensure your video content meets broadcast-safe standards, you need to adjust your settings accordingly.
First, navigate to the 'File' menu and select 'Project Settings' in DaVinci Resolve. From there, go to the 'Color Management' tab and scroll down to the 'Broadcast Safe' section. Set the levels to range from 0 to 100 from the drop-down menu.
The goal is to make sure your image's highlights are below 1023 and your shadows are above zero, as anything outside of this range will get clipped or crushed.
To do this, you can use the primary color wheels to adjust the gain control down until the trace is under 940 in the waveform scope. Then, drag up on the lift control until the shadow trace is above 64.
For Chroma levels, use your Vectorscope to ensure you meet the broadcast finishing compliance. The safe range is inside the lines connecting the boxes on the Vectorscope. If the trace goes outside of these lines, you'll need to make a secondary correction to fix it.
Here's a quick rundown of the safe levels for 525 video:
Audio and Visual Settings
To ensure your video meets broadcast-safe standards, you'll need to adjust your audio and visual settings. The first step is to set your Broadcast Safe levels in the project settings. This will give you an option to change your IRE levels to a strict setting of 0-100.
You can also visually identify areas in your video that don't comply with these limits by activating the Visual Display for Broadcast Safe Exceptions. This will show you blue dots or other indicators on areas of the video frame that are outside of your Broadcast Safe levels. These markers indicate parts of the video that need attention.
By paying attention to these visual indicators, you can identify areas with extreme brightness or color saturation levels that need adjustment to meet broadcast-safe standards.
If this caught your attention, see: Whatsapp Video Calls Are Safe
Audio
Audio is a crucial aspect of any broadcast, and it's essential to get it right. Broadcast engineers in North America typically set their audio gear to a nominal reference level of 0 dB on a VU meter aligned to +4 dBu or -20 dBFS.
To ensure a clean and clear signal, peak signal levels must not exceed the nominal level by more than +10 dB. This is a hard limit, so it's essential to keep your audio levels in check.
A good signal-to-noise ratio is also vital for broadcast audio. This means that speech or music should be at least 16 dB above the noise of the recording or transmission system. Any lower than this, and sonic enhancement is recommended to improve the audio quality.
It's surprising how often poor audio quality can be a major issue, especially in situations like cockpit voice recorders where the signal-to-noise ratio is very low. In these cases, sonic enhancement can be a lifesaver.
Recommended read: Essential Oils Safe
Visual Indicators Interpretation

The blue dot or other indicators are your guide to understanding which parts of the video are not compliant with Broadcast Safe norms.
These indicators appear in areas that have extreme brightness or color saturation levels, which is something you'll want to pay special attention to when adjusting your video to meet Broadcast Safe standards.
The blue dot or other indicators will show up on areas of the video frame, helping you quickly identify where your video needs adjustments.
To get the most out of this feature, make sure you're in the Color workspace and have activated the Display Broadcast Safe Exceptions option from the View menu.
A unique perspective: Blue Pans Dishwasher Safe
Gamut Mapping
Gamut Mapping is a crucial step in ensuring your visuals are broadcast safe. You can use the Gamut Mapping OFX to achieve this.
To start, choose Rec.709 from the Gamma Options in the Gamut Mapping OFX. This will ensure that your color values are mapped correctly within the Rec.709 legal standards.
In the “Gamut Mapping Method,” select “Saturation Compression.” This setting will help you identify and fix any color values that are outside the legal range.
By setting your scope to CIE Chromaticity, Rec.709, and D65, you can visualize if everything is staying within the chosen target. This is a great way to double-check your work and ensure everything is broadcast safe.
It's not always easy to recognize specular highlights on your monitor, but with soft clipping enabled, you can ensure that out-of-legal spikes get cut off and stay within the range.
DaVinci Resolve Settings
To set up your DaVinci Resolve project for broadcast-safe finishing, start by going into the project settings and clicking on the color management settings. You'll see an option that reads “Broadcast Safe” and gives you an option to change your IRE levels.
The IRE levels range from lenient to strict, with options for -20-120, -10-110, and 0-100. For a strict broadcast-safe finish, select the 0-100 option and check the box underneath to make the broadcast safe.
The REC 709 color spectrum window is a crucial tool for ensuring your colors are within broadcast-safe limits. You can see what's really going on with the color by looking at this window.
In the waveform scope, you can set up guides to represent the safe broadcast levels of 64 and 940. To do this, open the waveform options and check on “show reference levels.” Then, change the low number to 64 and the high number to 940.
To manually bring the exposure values into compliance, use the primary color wheels to adjust the gain control down until the trace is under 940 in the scope. Then, drag up on the lift control till the shadow trace is above 64.
For chroma levels, use the Vectorscope to ensure compliance. Notice the square markers on the Vectorscope for the vectors of red, magenta, blue, cyan, green, and yellow. If the chroma levels go outside of the imaginary hexagon formed by joining the lines, they're not safe for broadcast.
To make sure your Luma and Chroma levels are legal when rendering your project out, make two extra nodes at the timeline level. These nodes must be the very last ones in your node tree, and nothing should be altered after them.
Recommended read: Broadcast Control Channel
Exceptions and Standards
Exceptions to broadcast-safe standards exist, particularly with non-standard video equipment. Consumer devices like VHS and 8 mm recorders often lack time base correction, which can cause problems with genlock and sync.
Older videogame systems and computer video signals can also pose issues, as they may lack the half scan line needed for interlace or run at non-standard frame rates. Genlocking can help resolve these problems.
To visually identify areas of your video that don't meet broadcast-safe limits, activate the 'Display Broadcast Safe Exceptions' feature in the 'Color' workspace. This will display blue dots or other indicators on non-compliant areas of the video frame.
For your interest: Video over Cellular
Standard-Definition
Standard-Definition (SD) is a resolution of 480 horizontal lines, which is significantly lower than High-Definition (HD) at 720 or 1080 lines.
The most common SD resolution is 480i, which is an interlaced format that displays 480 lines in an alternating pattern of odd and even fields.
SDTV, or Standard-Definition Television, is a type of TV that displays SD resolution, which is typically broadcast in an analog format.
Meeting Standards

Identifying problem areas is key to meeting Broadcast Safe standards. You can do this by going to the 'View' menu and selecting 'Display Broadcast Safe Exceptions' in the 'Color' workspace.
You'll see a blue dot or other indicators appearing on areas of the video frame that don't comply with your Broadcast Safe levels. These markers will guide you to areas with extreme brightness or color saturation levels.
To adjust these regions, you can use the curves, color wheels, or other grading tools available in the 'Color' workspace. This will help you bring them into the safe range you previously defined in your 'Project Settings'.
Using the dropper, select the warning areas and start adjusting the color curve as needed. You can also use a DaVinci Resolve plugin called ResolveFX Color to add gamut mapping, which compresses the saturation below your color warning.
Digital Television Only Environments
In digital television only environments, the rules for broadcast safe analogue television take on a slightly different meaning. All broadcasting systems will have been mostly converted to digital only outputs, leaving fewer entry points for analogue television signals.
Check this out: Serial Digital Interface
In these environments, devices that feed to the television transmitter must take in and feed standard analogue television signals into the transmission chain. This is mostly up to the switcher to notify the programmer of non-broadcast safe video inputs.
However, due to the limitations of many switchers for DTV and HDTV, it ultimately is up to the automation systems to alert the programmer of non-broadcast safe video inputs.
Here's a breakdown of the technical issues involved:
Non-Standard
Non-standard video signals can cause problems in broadcast environments. These issues arise from consumer-grade equipment that produces signals not designed for broadcast.
Consumer devices like VHS and 8 mm recorders often lack time base correction, which can lead to genlock and sync issues with broadcast equipment. Genlocking is a recommended solution to fix this problem.
Older videogame systems generated video signals lacking the half scan line needed for interlace, causing NTSC sets to scan 240p/60 instead of 480i60. This signal modification can cause problems in a broadcast environment.

Computer video signals can be set up to run at various frame or field rates, ranging from 50 frame/s to over 240 frame/s. Computer video is generally progressive by default, but interlaced modes exist.
To convert these signals to broadcast standards, a scan converter is typically needed. This conversion can degrade the quality of the broadcast image, resulting in motion artifacts or lower resolution.
Here are some common non-standard video issues and their recommended solutions:
- VHS and 8 mm: Genlocking
- Older videogame systems: Genlocking (not timebase correction)
- Computer video signals: Set display rate to equal target television rate, or use a scan converter
TV and Display Settings
To ensure your video is broadcast-safe, you'll want to set your levels within DaVinci Resolve. Navigate to the 'File' menu and select 'Project Settings', then go to the 'Color Management' tab.
Broadcast Safe levels can be set to range from 0 to 100 from the drop-down menu. This is a crucial step to maintain a uniform viewing experience across various platforms and devices.
High Definition
High Definition (HD) is a resolution that offers a more detailed and sharper image compared to standard definition. It's a significant upgrade for TV and display settings.
In digital broadcasting, High Definition video is transmitted using 8VSB, a type of digital transmission technology. This allows for a more efficient and reliable transmission of data.
The resolution of High Definition video can vary, but it's typically measured in pixels. For example, 720p and 1080p are common resolutions for HD video.
Here are some key characteristics of High Definition video:
As you can see, High Definition video can have different resolutions and frame rates, depending on the specific requirements of the content being broadcast.
625
The 625 system is a standard for broadcast-safe video. It's often referred to as 625/50i, which is a bit of a misnomer since it's usually associated with PAL color encoding.
This system uses a digital SDSDI baseband signal with a bitrate of 270 Mbit/s, which is specified in SMPTE 259M-C. If you're working with this system, it's essential to keep an eye on your vertical lines, as the number of vertical lines is commonly set to 625, with 576 visible active video lines.
Readers also liked: Basic Interoperable Scrambling System
The frame rate for 625 systems is typically set to 25 Hz, or 25 interlaced frames per second. This can be a bit tricky to wrap your head around, but essentially, it means the system is displaying 25 interlaced frames per second.
The TV resolution for 625 systems is 720 x 576, which is a relatively standard resolution for this type of system. If you're working with black levels, you'll want to keep them at 0 mV or 0 IRE, as this is the standard for 625 systems.
Here's a quick reference guide to the key specs for 625 systems:
Comparison and Key Information
Broadcast-safe refers to the process of ensuring that audio and video content is suitable for broadcast on television and other platforms.
It's a crucial step in content creation to avoid any technical issues or legal problems.
The FCC regulates the broadcast industry, and its guidelines are essential to follow to ensure broadcast-safe content.

Content creators must consider factors such as loudness, color accuracy, and closed captions to ensure their work is broadcast-safe.
Closed captions are a must-have for broadcast-safe content, as they provide vital information for viewers with hearing impairments.
The FCC requires closed captions to be accurate, complete, and synchronized with the audio.
V22 vs V17
V22 and V17 can produce different readings for the same clip, as seen in the example of a clip rendered in V22 with the "Broadcast Color" filter applied, but still showing hot levels when brought back into the V22 timeline.
Roger's experience shows that the same clip can read OK in V17, but not in V22, suggesting a discrepancy in their waveform readings.
In Roger's case, the project properties were set to "pixel format-legacy 8bit" on both V17 and V22, which may have contributed to the issue.
This highlights the importance of double-checking waveform readings across different versions of the software.
Key Takeaways

If you're planning to show your video on TV, using broadcast safe in DaVinci Resolve is an excellent way to perfect your colors.
Using the color management feature in Resolve, you can find the broadcast safe settings and choose your IRE levels to make your video broadcast safe.
Keep in mind that every specific news channel or broadcast company has its own specifications, so it's essential to check their individual requirements.
To adjust the warning areas that appear when you view broadcast exceptions, you can use either the ResolveFX Color plugin or the dropper tool.
Frequently Asked Questions
What is the ire level for broadcast safe?
For broadcast safe standard-definition video, the IRE level is 100. This corresponds to 100% intensity, specifically 700 mV p-p or 100 IRE.
What is the safe area for TV broadcast?
The safe area for TV broadcast is a rectangular space that keeps text and graphics from being cut off or distorted, even in the worst-case on-screen location. It's a crucial area to consider for a clean and professional TV broadcast.
Featured Images: pexels.com


