
If you're tired of dead zones and spotty internet connections, there's good news: boosting your internet WiFi coverage is easier than you think.
One simple solution is to upgrade your router to a newer model, which can increase your WiFi speed by up to 75%.
Did you know that placing your router in a central location can improve your WiFi coverage by up to 50%? Try moving it to a more central spot in your home.
Using a WiFi range extender can also help fill in gaps in your coverage, especially in larger homes.
Here's an interesting read: Wifi Router Green Light but No Internet
Basic Troubleshooting
Sometimes, a simple restart can work wonders for your Wi-Fi. Restarting your modem and router, or your gateway, is a good place to start when you're experiencing slow Wi-Fi.
You can also try restarting your device's Wi-Fi by switching it off, waiting a few seconds, and then switching it back on. This can help resolve issues with individual devices.
To do this, go into your device's settings, switch off Wi-Fi, wait a few seconds, and then switch it back on. This is a good step to take if you're experiencing slow Wi-Fi with just one device.
Here's an interesting read: Wifi Internet Speed Slow on Mobile
Restart Your Device
Restarting your device can be a simple yet effective way to troubleshoot slow Wi-Fi. This process clears your device's memory and gives it a fresh start.
Restarting your router or mesh system is a great place to start. A power cycle clears your router's memory and gives it a fresh start on tasks that were bogging it down before. This can take just a few minutes and can make a big difference.
If you're experiencing slow Wi-Fi across all your wireless devices, restarting your router or mesh system may not be the solution. However, if only one device is experiencing slowdowns, try switching off Wi-Fi on that device, then switch it back on and reconnect. This process is called a power cycle.
Here are some steps to take if you're experiencing slow Wi-Fi on a single device:
- Power cycle the device (switch it off and on, not reboot)
- Forget the Wi-Fi connection and reconnect
- Update drivers or firmware
- Factory reset the device
It's a good idea to reboot your equipment regularly, at least once every few months. Some modern routers and gateways even allow you to schedule reboots when everyone is offline.
Update Your Firmware
Updating your router's firmware is a simple yet effective way to boost your internet speeds and fix connectivity issues. It's like giving your router a software update, just like you would on your phone or computer.
Most modern routers have the update process built right into the administration interface, making it easy to hit the firmware upgrade button. Even if your wireless network isn't ailing, it's a good idea to update the firmware on a regular basis for performance improvements, better features, and security updates.
Older models may require a bit more effort, but it's still worth doing. You'll need to visit the manufacturer's website, download a firmware file from your router's support page, and upload it to the administration interface. It's a bit tedious, but it's a simple fix that can make a big difference.
It's also worth noting that automatic firmware updates are enabled by default on many newer routers and all mesh systems. However, it's still a good idea to check the firmware version to ensure you're up to date, and verify that firmware updates are enabled (and toggle them on if not).
You might like: Is Spectrum Internet Good
To get the most out of your current router, you can also consider installing a third-party firmware like DD-WRT. This can ramp up performance and give you access to more advanced networking features, including the ability to install a VPN right onto your router.
Here are some general steps to follow when updating your router's firmware:
- Check your router's administration interface for a firmware update tool
- Download and upload the firmware file from your router's support page
- Verify that firmware updates are enabled (and toggle them on if not)
Easy Setups
Easy setups can make a huge difference in your WiFi experience. The Nighthawk Mesh Extender system and Orbi WiFi Systems are designed to provide seamless WiFi coverage without the complexity of traditional extenders and routers.
NETGEAR's Orbi Mesh Systems are unique for their ease of use and powerful dedicated WiFi connections between nodes. They share the same network name and security credentials as your existing router, eliminating login disruptions and bandwidth issues.
You can choose the right Orbi for you by comparing the latest Orbi Mesh WiFi Systems. The Find My Orbi Tool can also help you find the perfect Orbi recommendation.
A unique perspective: T Mobile Internet Wifi Mesh Access Point
EasyMesh is a standard that allows compatible routers, access points, extenders, and adapters of any brand to create a mesh network. This means you can mix and match devices from different brands to create a seamless WiFi network.
In contrast, proprietary systems like TP-Link's OneMesh and ASUS AiMesh only work with specific devices. EasyMesh is becoming more widely available, showing up in router firmware updates and available out of the box for new network setups.
Suggestion: Wifi 6e Devices
Optimize Your Network
To achieve optimal router placement, keep your router surrounded by open air, away from walls and obstructions, to prevent interference and overheating.
Place your router in the center of the house, if possible, to ensure the signal reaches every corner with ease. If you can eliminate even one wall between your workspace and the router, you can drastically improve performance.
Wi-Fi boosters can also be a game-changer, but they only work on routers with removable antennas. They plug directly into the router's empty antenna port and broadcast a stronger signal than the router's original antenna.
To find the best channel group, install a free app like WiFi Analyzer or NetSpot and scan Wi-Fi channel use. This will help you determine the best channels by examining the scan's results.
Here are some key tips to keep in mind when optimizing your network:
- Keep the router away from walls and obstructions.
- Place the router in the center of the house.
- Eliminate walls between your workspace and the router.
- Avoid heavy-duty appliances or electronics.
- Elevate the router to get a better signal.
Optimal Placement
To achieve optimal Wi-Fi coverage, it's essential to place your router in a strategic location. Keep the router surrounded by open air, away from walls and obstructions, to prevent interference and overheating. This will help ensure a strong signal throughout your home.
The center of the house is usually the best spot for your router, as it allows the signal to reach every corner with ease. If you can't place it in the center, try to eliminate at least one wall between your workspace and the router to improve performance.
Heavy-duty appliances and electronics can impact Wi-Fi performance, so keep them at a distance. If your router has external antennas, orient them vertically to boost coverage. Elevating the router, such as mounting it high on the wall or on the top shelf, can also help improve the signal.
Here are some key placement tips to keep in mind:
- Keep the router away from walls and obstructions.
- Place the router in the center of the house.
- Eliminate one wall between your workspace and the router.
- Avoid heavy-duty appliances and electronics.
- Orient external antennas vertically.
- Elevate the router for better signal strength.
Choose the Right Channel
Choosing the right Wi-Fi channel can make a big difference in your connection speed. Most routers automatically select channels, but you can change them to avoid interference.
The 2.4 GHz frequency is crowded and has overlapping channels, making it harder to find a clear one. Channels 1, 6, and 11 are the only ones with no overlap, but even these can lead to co-channel interference.
Changing the channel of one device may not solve the problem, as devices need to be on the same channel to communicate with each other. This is like using a two-way radio โ you need to select a channel not already in use to avoid interference.
Mesh-based systems try to avoid this issue by placing similar devices on the same channel, but this can still lead to interference from adjacent channels. Devices on the 2.4 GHz frequency can lose signal strength from other equipment that uses radio waves, like microwaves or baby monitors.
A higher frequency like 5 GHz can offer better connection speeds, but it's not always better. It depends on how you use it โ if you have a lot of equipment running on 5 GHz, you may need more access points to keep the signal at ideal levels.
Readers also liked: Wifi Connected but No Internet Only on One Device
Hardware Upgrades
Upgrading your router can significantly improve your internet Wi-Fi. A Wi-Fi 6 router can theoretically hit 10Gbps, compared to the 54Mbps of 802.11g and 300Mbps of 802.11n.
Older routers may be holding you back, especially if they're using outdated Wi-Fi generations. For instance, 802.11g and 802.11n have lower bandwidths and shorter ranges compared to newer standards.
If your router is five or more years old, it may be running on a standard two years behind the current one. This can compromise its effectiveness and limit your internet speeds.
Replacing your router is a practical choice if you're experiencing poor internet performance. When selecting a new router, consider your budget, maximum ISP speeds, distance needed to cover, and whether your modem needs an upgrade as well.
You can see which standard your current router uses by looking at the device. For example, 802.11ax is the most recent standard, commonly called Wi-Fi 6. Wi-Fi 5 refers to 802.11ac, and 802.11n is Wi-Fi 4.
Curious to learn more? Check out: Wifi 5 Speeds vs Wifi 6
A new router typically costs over $100, but it can be worth the investment if it improves your internet speeds and reliability. Consider buying a Wi-Fi 6 router, which can support higher speeds and more devices.
If you're renting your equipment from your provider, you can request new units if you feel they're causing poor network performance. However, buying your own modem and router can give you more control over the features, speeds, and security of your home network.
If your router uses an internal antenna, adding an external one can improve your signal strength. Choose a high-gain antenna, and consider a directional antenna if you have weak spots in specific areas.
Here are some key factors to consider when buying a new router:
- Budget: A new router typically costs over $100.
- Maximum ISP speeds: Make sure the new router supports your internet service provider's speeds.
- Distance needed to cover: Consider additional solutions if you have a large home.
- Modem upgrade: Check if your modem needs an upgrade as well.
By upgrading your router and considering these factors, you can improve your internet Wi-Fi and enjoy faster speeds and more reliable connections.
Network Configuration
To boost your internet WiFi, you need to consider your network configuration. A good starting point is to change your WiFi channel to a less crowded one, as having too many devices on the same channel can slow down your internet speed.
Here's an interesting read: What Wifi Channel
The ideal WiFi channel depends on your location and the devices connected to your network. In our previous section, we discussed how to find the least crowded channel using tools like WiFi Analyzer.
Channel bonding can also improve your WiFi speed. This feature allows your router to use multiple channels to increase the overall bandwidth.
Extending Your Network
If your router or gateway is in the best location, but you're still having speed or connectivity issues in certain areas of your home, you may need to extend your network's range.
There are a few different devices you can use to increase the reach of your network.
Wi-Fi extenders are a popular solution, and they can be set to Repeater or Access Point mode. With Repeater mode, the device uses Wi-Fi to connect to your router and rebroadcast the Wi-Fi network.
Wi-Fi boosters are another option, but they only work on routers with removable antennas and plug directly into the router's empty antenna port.
Explore further: Wifi Repeater Disconnected from Internet
A wireless range extender is a product that can be added to your existing router and devices, but it may not work as effectively as a custom-designed system.
Wi-Fi repeaters are older technology than extenders, which means they may not be as effective, especially if you have a lot of devices using the same channel.
Range extenders, on the other hand, use a different channel to extend the Wi-Fi signal, making them a better option for stationary devices like televisions.
Powerline adapters can also be used to extend your network, and they plug into wall outlets to send network signals across your existing power lines.
Whole home coverage is also possible with devices that use mesh-based technology, like Smart Roaming, which intelligently connects your devices to the fastest WiFi signal.
For more insights, see: Why Is My Wifi Saying No Internet
Hardware Options
Upgrading your router can make a big difference in your internet speed. If you're still using an old router, it's likely running on an outdated Wi-Fi generation, which can cap at low bandwidths.
A good rule of thumb is to check the age of your router and its corresponding Wi-Fi standard. For instance, 802.11g (Wi-Fi 3) has a maximum throughput of 54Mbps, while 802.11n (Wi-Fi 4) caps out at 300Mbps. In contrast, a Wi-Fi 6 router can theoretically hit 10Gbps.
If you're due for an upgrade, consider the following factors: budget, maximum ISP speeds, distance needed to cover, and whether your modem needs an upgrade as well. A new router typically costs over $100, so it's essential to factor that into your budget.
Here are some key Wi-Fi standards to keep in mind:
- 802.11ax (Wi-Fi 6): allows the router to run at different frequencies at the same time
- 802.11ac (Wi-Fi 5): can match the frequency to the device
- 802.11n (Wi-Fi 4): can work with 5 GHz and 2.4 GHz frequencies, but not simultaneously
Dual Band 8 Gbps Wall Plug
A router upgrade can make a significant difference in your Wi-Fi speed and coverage. Routers become outdated quickly, and periodic firmware upgrades can only do so much.
You should consider the age of your router, as it affects the wireless standard it uses. Standards change about once every four to five years, so a router five or more years old may be running on a standard two years behind the current.
The wireless standard is a primary determiner of a router's quality, and it can compromise effectiveness if you skimp on a cheap or retired product. Homeowners can see which standard their current router uses by looking at the device.
A Dual-Band WiFi 6 Mesh Extender like the AX1600 4-Stream WiFi 6 Mesh Extender (EAX12) can provide a significant boost to your Wi-Fi speed and coverage. This extender has a speed of 1.8Gbps and can cover a large area with its internal antennas.
Here are some key features of the AX1600 4-Stream WiFi 6 Mesh Extender (EAX12):
- Speed: 1.8Gbps
- Standard: WiFi 6 (802.11ax)
- Distance: Covers a large area with internal antennas
- Power: Wall-plug design for easy installation
Powerful, Easy-to-Use App
The Nighthawk app is a game-changer for setting up your extender, allowing you to get started in just minutes. You can see your WiFi name and password at a glance, which is super helpful.
With the app, you can easily check what devices are connected to your extender, giving you a clear view of your network. This feature is especially useful for keeping an eye on who's online and what they're doing.
Router Selection
Choosing the right router is crucial to boosting your internet WiFi. A dual-band router can provide faster speeds and better coverage.
When selecting a router, consider the number of devices you need to connect. For example, if you have a large household with many devices, you'll want a router with a higher number of ports, such as the 16-port router mentioned in the "Router Types" section.
A router's range and speed can be affected by its frequency band. A router that supports both 2.4GHz and 5GHz frequencies can provide a stronger signal and faster speeds, as seen in the "Frequency Bands" section.
Recommended read: How to Make Spectrum Internet Faster
Nighthawk Dual Band
If you're looking for a reliable dual-band extender, consider the Nighthawk WiFi 7 Dual-Band Extender, also known as the AX3000 WiFi 6 Mesh Extender (EAX17).
This device is designed to boost your existing WiFi network, providing a strong and stable connection to all your devices.
The Nighthawk WiFi 7 Dual-Band Extender supports WiFi 6 technology, which is a significant upgrade over the older WiFi 5 standard.
With a maximum speed of AX3000, this extender can handle even the most demanding online activities, such as streaming 4K videos and online gaming.
The AX3000 WiFi 6 Mesh Extender (EAX17) is a great option if you need a plug-and-play solution that's easy to set up and use.
Nighthawk Xs Tri-Band, 3Gbps
The Nighthawk Xs Tri-Band, 3Gbps router is a top-notch option for heavy internet users. It features a tri-band design, which allows for dedicated 5GHz channels for devices and a 2.4GHz channel for IoT devices and older devices.
This router is capable of delivering speeds of up to 3Gbps. This is made possible by its powerful processor and advanced Wi-Fi technology.
The Nighthawk Xs Tri-Band router also has a large number of LAN ports, making it easy to connect multiple devices at once.
Internet-Provider Friendly
The Nighthawk Mesh Extender is designed to work with any WiFi router, including the most basic ISP-provided equipment.
This means you can use it with your existing router, no matter what brand or manufacturer it is. It's a great option if you want to expand your WiFi coverage without having to upgrade your entire system.
NETGEAR WiFi 6 Mesh Extenders are also compatible with virtually all internet service providers' equipment to extend coverage.
This compatibility makes it easy to get started, and you can be confident that your extender will work with your internet service provider's equipment.
Router Models
Let's take a look at some popular router models that can help boost your internet WiFi. The Netgear Nighthawk R7000 is a top pick for many users, offering fast speeds and a strong range.
One of the key features of the R7000 is its dual-band technology, which allows for simultaneous 2.4GHz and 5GHz connections. This means you can enjoy fast speeds and reliable connections on all your devices.
The Asus RT-AC86U is another highly-rated router model that's known for its excellent performance and range. It features a powerful 1.8GHz dual-core processor and MU-MIMO technology for seamless connectivity.
The Google Wifi system is a great option for those who want a simple and easy-to-use solution for boosting their WiFi. It features a mesh network design that provides strong and reliable coverage throughout your home.
The Linksys EA9200 is a fast and feature-packed router that's perfect for heavy internet users. It offers fast speeds, a strong range, and advanced security features like WPA3 encryption.
Understanding Your Network
Wi-Fi boosters are a great way to amplify your internet signal, but they only work with routers that have removable antennas.
Wi-Fi boosters plug directly into the router's empty antenna port and broadcast a stronger signal than the router's original antenna.
Some routers have removable antennas, making them compatible with Wi-Fi boosters.
Worth a look: Do Wifi Boosters Increase Internet Speed
Find Your Perfect Spot
Finding the perfect spot for your router can make a huge difference in your Wi-Fi signal. This is often overlooked, but it's a crucial step in getting a strong connection.
The ideal spot for your router is not necessarily the center of your home, but rather the center of where you need the connection the most. If you don't need a strong signal in a remote part of the basement, you don't need to target your router in that direction.
A common mistake is placing the router in the kitchen, thinking it's the perfect spot because it's central to the home. However, the kitchen is often full of devices that can block the signal, like metal equipment and appliances.
Take a look at this: Call Center Internet
To get a better signal, place your router several feet away from any devices or equipment. This will help minimize interference and ensure a stronger connection.
Here are some general rules to follow for router placement:
- several feet away from any devices or equipment
- in the center of a large room
- near the center of the home
- away from heavy wood or metal furniture
- high up, possibly on a higher floor
If you have a router with multiple antennae, make sure they're pointed in the right direction. This can significantly affect the signal, especially if they're directional antennae.
Systems
Wi-Fi boosters can be a good option for improving your network, but they only work with routers that have removable antennas. They plug directly into the router's empty antenna port and broadcast a stronger signal than the router's original antenna.
Mesh systems are a more advanced solution that can provide seamless coverage throughout your home. They work by creating a network of interconnected devices that communicate with each other to provide a strong and stable connection.
A mesh system can be especially useful if you have a large home or a lot of obstacles that can interfere with your Wi-Fi signal. The devices can be placed in strategic locations to provide coverage to areas that were previously dead zones.
Broaden your view: How to Get Internet Wifi at Home
Mesh systems can also be more convenient than traditional Wi-Fi extenders, as they often have a simpler setup process and don't require you to log in to multiple networks. Some mesh systems, like the Orbi Mesh Extender, have a dedicated connection to your router that isn't shared with your devices, which can improve performance.
One thing to keep in mind when choosing a mesh system is that it's best to use two or more units that are placed in line of sight with each other to beam Wi-Fi around objects and corners. You can also consider using a mesh system that allows you to add more units as needed, so you can expand your coverage area over time.
Here are some key differences between mesh systems and traditional Wi-Fi extenders:
- Mesh systems use dedicated wireless channels, while traditional Wi-Fi extenders use the same channel as your router.
- Mesh systems are designed to work together seamlessly, while traditional Wi-Fi extenders can cause login disruptions and bandwidth issues.
- Mesh systems are often easier to set up and use than traditional Wi-Fi extenders.
By understanding the different types of systems available, you can make an informed decision about which one is right for your home and your needs.
Know Your Speed
Knowing your internet speed is crucial to troubleshooting connections. Simply log in to your account using your provider's mobile app or web interface to get the number in megabits per second (Mbps).
Your internet plan's advertised speed should be listed, so take note of that number. Compare it to the speed test results provided below.
It's normal for speeds to vary, but if you're getting speeds far below what you expect, it's time to troubleshoot.
Curious to learn more? Check out: Wifi 6 Speed
Reviews and Comparisons
Boosting your internet WiFi can be a game-changer for your online activities.
Many WiFi boosters on the market claim to improve your internet speed, but some stand out from the rest, such as the Netgear N600 WiFi Range Extender, which can cover up to 1,000 square feet.
For those with larger homes or offices, a mesh WiFi system like Google Wifi might be a better option, providing strong coverage for up to 4,500 square feet.
If you're looking for a budget-friendly option, the TP-Link RE200 WiFi Extender is a great choice, priced under $50 and able to cover up to 1,000 square feet.
Synology Wrx500 Review

If you're in the market for a new router, setting it up won't be too daunting. I've found that following a comprehensive guide can make all the difference.
You might still have older devices that fall back to outdated wireless standards, like 802.11ac. This is a common issue, especially if you have devices that are over 10 years old.
Buying a Wi-Fi adapter can be a cost-effective solution to improve connectivity for these older machines. This way, you don't have to replace a computer entirely just to take advantage of new Wi-Fi technology.
See what others are reading: New Light Connection Wifi Internet
Wyze Pro Review
The Wyze Pro Router is a great option for those looking to upgrade their home network. It's a Wi-Fi 6E router that offers fast speeds and reliable connections.
Some newer routers, like the TP-Link Archer AX11000, have features like Multi-User Multiple Input Multiple Output (MU-MIMO) that allow for multiple data streams to be sent and received simultaneously.
Eero Pro Review
The Eero Pro 6E is a solid choice for a mesh system, but keep in mind that you may still experience some performance loss on the far ends of your house.
To get the best results, place the main unit in the center of the house. Connecting the nodes with Ethernet cables will produce the best results, and it's worth calling an electrician to run the wires if you want problem-free Wi-Fi.
One of the downsides of Wi-Fi mesh systems is that they're generally more expensive than range extenders, but prices are coming down. The Eero line is priced lower than much of its mesh competition.
Here are some tips to consider when choosing between a mesh router and a range extender:
- Place the main unit in the center of the house
- Connect nodes with Ethernet cables
- Consider the cost and potential performance loss on the far ends of your house
Frequently Asked Questions
Does Boost provide home internet service?
Yes, Boost Mobile offers home internet service, utilizing 5G network technology for wireless broadband connectivity. Learn more about Boost's home internet plans and features.
Featured Images: pexels.com


