Allow Azure Services and Resources to Access This Server with Step-by-Step Guidance

Author

Reads 1.2K

Woman using a secure mobile app, showcasing data encryption on a smartphone.
Credit: pexels.com, Woman using a secure mobile app, showcasing data encryption on a smartphone.

To allow Azure services and resources to access this server, you need to create a network security group (NSG) with the correct inbound security rules. This will enable Azure services to communicate with your server.

You can create an NSG by going to the Azure portal, clicking on "Resource groups", and then clicking on "New". From there, you can select "Network security group" and follow the prompts to create a new NSG.

The NSG should be associated with the virtual network (VNet) that your server is connected to. This will allow Azure services to communicate with your server through the VNet.

Allow Azure Services

Allowing Azure services and resources to access your server is a crucial setting in Azure. By default, it's unchecked and not enabled, but you can change it via the Networking setting after the logical server is created.

Enabling this setting allows communications from all resources inside the Azure boundary, regardless of whether they are part of your subscription. This might be more permissive than what most customers want.

Credit: youtube.com, Allow Azure Trusted Services vs Allow Azure Services

This setting adds an IP-based firewall rule with start and end IP addresses of 0.0.0.0, which affects several features that run on virtual machines in Azure that aren't part of your virtual network.

Here are some features that are affected by enabling this setting:

  • Import Export Service doesn't work when Allow Azure services and resources to access this server isn't enabled.
  • Azure Private Link doesn't work when this setting is disabled.

Import Export Service

The Import Export Service is a powerful tool, but it's not without its quirks. If you're trying to use it, you'll need to make sure Allow Azure services and resources to access this server is enabled.

This is because the Import Export Service doesn't work properly without this setting. You can't rely on it to do the job, so you'll need a backup plan.

You can work around the problem by manually running SqlPackage from an Azure VM. This will get the job done, even if the Import Export Service isn't cooperating.

Alternatively, you can perform the export directly in your code using the DACFx API. This way, you'll be in control and can avoid any issues with the Import Export Service.

SQL Service Tag

Credit: youtube.com, Network Security for Azure SQL | Azure SQL for beginners (Ep. 22)

SQL Service Tag is a crucial component in securing your Azure SQL Database. It's used in security rules and routes from clients to SQL Database.

The Sql service tag consists of all IP addresses that are being used by SQL Database. These IP addresses are segmented by regions, such as Sql.WestUS, which lists all the IP addresses used by SQL Database in West US.

You can use the Sql service tag in network security groups, Azure Firewall, and user-defined routes by specifying it in the source or destination field of a security rule. This helps protect your SQL Database from unauthorized access.

The Sql service tag includes IP addresses required to establish connectivity to SQL Database, as well as outbound traffic from SQL Database used in features like Auditing, Vulnerability assessment, and Import/Export service.

Here are some features that are associated with the Sql service tag:

  • Auditing
  • Vulnerability assessment
  • Import/Export service
  • OPENROWSET
  • Bulk Insert
  • sp_invoke_external_rest_endpoint
  • Ledger
  • Azure SQL transparent data encryption with customer-managed key

Setting Up Resources

To set up the resources you need for allowing Azure services to communicate, start by creating a new Virtual Network. I've created one with a 10.220.0.0/24 address space and two subnets, one of which will be delegated to the App Service later on.

Credit: youtube.com, Azure Files - Assign Azure Permissions to Users/Groups That Require Access 11/13

You'll also need an Azure App Service and an Azure SQL DB with a Sample db loaded, as these are the resources we're working with in this example.

To connect your App Service to the Virtual Network, navigate to the App Service and click on 'Networking'. The first option is the one we need, 'VNet Integration'. Select the Virtual Network and the 'webapp' subnet you just created and click Ok.

Subnet Delegation has been enabled for the 'webapp' subnet. This is important because it allows the App Service to use the subnet for communication.

To see the address our App Service uses to connect to our database, we're going to use the nameresolver.exe. This will show us the private IP address of the App Service, which we can use to connect to the database.

Here are the resources we need to create:

  • Azure App Service
  • Azure SQL DB with the Sample db loaded
  • New Virtual Network with a 10.220.0.0/24 address space and two subnets

Note that we've also set up VNet Integration by mounting a network interface into our subnet, which allows traffic to flow through the Virtual Network. This is an important step in allowing Azure services to communicate.

Thoughts and Comments

Credit: youtube.com, Allow Azure Services Access to Storage Accounts

Allowing Azure Services can be a double-edged sword. This is especially true for those using GitHub Actions to deploy to Azure.

It's worth noting that a single checkbox can have significant implications. This checkbox is a big hole punched in the firewall that allows everyone using Azure infrastructure to contact your server.

Azure Private Link allows you to connect to a server via a private endpoint, which is a private IP address within a specific virtual network and subnet.

Private Link is a relatively new service available on quite a lot of Azure services, and it enables you to restrict access to your SQL DB to only your Virtual network, making the ingress private.

To set up Azure Private Link, find your SQL server in the Azure portal and navigate to the ‘Private endpoint connections’ blade.

Select ‘Microsoft.SQL/Server’ as the ‘Resource Type’ and select your server from the drop down in the second step of the wizard.

Consider reading: Azure Service Endpoints

Credit: youtube.com, Azure Private Endpoint & Private Link explained in plain English with a story & demo in 5 minutes

Make sure you select the ‘default’ subnet and keep ‘Integrate with private DNS zone’ On in the third step.

Your private link will get an IP in your subnet and be listed as a ‘Connected Device’ on your virtual network.

To see the address your App Service uses to connect to your database, use the nameresolver.exe command in the console on the App Service.

Getting Started

When you're trying to figure out how to allow Azure services and resources to access your server, it can be overwhelming.

First, try searching for a built-in Azure Policy that might help. Unfortunately, you won't find one, as the author of the article did not find any policy definition for the AllowAllAzureIps setting in Azure Policy.

To get started, you'll want to explore other options, such as Azure Security Center recommendations. However, even those won't provide the answer you're looking for, as the author mentions not a single mention of the AllowAllAzureIps setting in those recommendations.

Where To Start

Close-up of a modern security camera installed indoors, ideal for surveillance.
Credit: pexels.com, Close-up of a modern security camera installed indoors, ideal for surveillance.

When searching for a solution, it's natural to start with built-in features.

My first instinct was to search for a built-in Azure Policy for the issue at hand.

The initial search through Azure Policy yielded nothing.

Checking Azure Security Center recommendations also didn't turn up any mention of the AllowAllAzureIps setting.

It's surprising how often we overlook the obvious, but that's where starting the search process is crucial.

The key takeaway here is to thoroughly search through built-in features before moving on to more complex solutions.

My Experience

My experience has taught me that Azure SQL servers can be deployed using GitHub Workflows, even with a firewall enabled.

You can use the azure/sql-action@v1 Action in a GitHub Workflow to deploy an Azure SQL server.

Be aware that maintaining a list of GitHub IP addresses in your firewall configuration can be a daunting task, as the list is very long and constantly changing.

Azure Database

To allow Azure services and resources to access this server, you'll need to create a Private Link to Azure SQL Database. Find your SQL server in the Azure portal and navigate to the ‘Private endpoint connections’ blade.

Credit: youtube.com, How to Set the Allow Azure Services and Resources to Access This Server Option Using Azure CLI

Select ‘Microsoft.SQL/Server’ as the ‘Resource Type’ and choose your server from the dropdown. Make sure to select the ‘default’ subnet and keep ‘Integrate with private DNS zone’ On.

You can verify that the Private Link was created by checking the ‘Connected Device’ on your virtual network. The Private Link will also have an IP address in your subnet.

To see the address your App Service uses to connect to the database, use the nameresolver.exe command in the console on the App Service.

Lamar Smitham

Writer

Lamar Smitham is a seasoned writer with a passion for crafting informative and engaging content. With a keen eye for detail and a knack for simplifying complex topics, Lamar has established himself as a trusted voice in the industry. Lamar's areas of expertise include Microsoft Licensing, where he has written in-depth articles that provide valuable insights for businesses and individuals alike.

Love What You Read? Stay Updated!

Join our community for insights, tips, and more.