
The 1.25-meter band is a unique frequency range that's gained popularity in recent years, especially among amateur radio operators. This band operates between 220 and 225 MHz.
It's worth noting that the 1.25-meter band is a relatively narrow range, which can make it more challenging to find a clear frequency to operate on.
In many countries, the 1.25-meter band is used for various purposes, including amateur radio, emergency communication, and even some commercial applications.
Consider reading: S Band
A different take: 160-meter Band
US Novice Licensees
US Novice Licensees were given privileges in the 1.25-meter band in 1987 by the FCC, allowing voice communication on portions of the band.
The modification was made in an attempt to increase use on the band, which had remained stagnant despite the high activity on the 2-meter and 70-centimeter bands.
Many amateurs had called for this change, and it led to some manufacturers producing equipment for the 1.25-meter band.
However, the equipment never sold well, and by the early 1990s, most manufacturers had stopped producing equipment for the band.
Band Use
The 1.25-meter band is used by many amateur radio enthusiasts who are interested in the VHF spectrum. The band is allocated mostly in ITU Region 2, with Somalia being the only exception in Region 1.
The major equipment manufacturers, such as Kenwood, Yaesu, and Icom, do not often offer transceiver models that cover the frequency range of the 1.25-meter band. This is because the equipment they have produced has not sold well compared to other products.
There are pockets of widespread use across the United States, mainly in New England and western states such as California and Arizona, with more sporadic activity elsewhere. The number of repeaters on the 1.25-meter band has grown over the years to approximately 1,500 nationwide as of 2004.
Here are some countries with known allocations for the 1.25-meter band:
- Anguilla (220–225 MHz)
- Argentina (220–225 MHz)
- Aruba (220–225 MHz)
- Barbados (222–225 MHz)
- Belize (220–225 MHz)
- Bermuda (220–225 MHz)
- Bolivia (220–225 MHz)
- Bonaire (220–225 MHz)
- Brazil (220–225 MHz)
- British Virgin Islands (220–225 MHz)
- Canada (222–225 MHz amateur primary exclusive; 219–220 MHz secondary and shared; 220–222 MHz, only for "disaster relief" )
- Cayman Islands (220–225 MHz)
- Chile (220–225 MHz)
- Costa Rica (222–225 MHz)
- Colombia (220–225 MHz)
- Cuba (222.9–224.6 MHz)
- Curaçao (220–225 MHz)
- Dominica (222.340–224.000 MHz)
- Dominican Republic (220–225 MHz)
- Ecuador (220–225 MHz)
- El Salvador (220–225 MHz)
- French Overseas Departments and Territories in Region 2 (220–225 MHz)
- Guyana (220–225 MHz)
- Haiti (220–225 MHz)
- Honduras (222–225 MHz)
- Jamaica (220–225 MHz)
- Mexico (222–225 MHz) (Band is channelized in some segments, and shared with commercial and government operations, including police.)
- Montserrat (220–225 MHz)
- Nicaragua (220–225 MHz)
- Panama (220–225 MHz)
- Paraguay (220–225 MHz)
- Peru (220–225 MHz)
- Sint Maarten (220–225 MHz)
- Suriname (220–225 MHz)
- Trinidad and Tobago (220–225 MHz)
- Turks and Caicos Islands (222–225 MHz)
- United States of America (222–225 MHz amateur primary exclusive; 219–220 MHz secondary, shared and limited)
- Uruguay (220–225 MHz)
- Venezuela (220–225 MHz)
Technical Details
The 1.25-meter band offers a unique combination of frequency and bandwidth, making it an attractive option for certain applications. The band's frequency range is between 126-137 MHz.
If this caught your attention, see: Ham Bands and Frequencies
The 1.25-meter band has a bandwidth of 11 MHz, which is relatively narrow compared to other amateur radio bands. This narrow bandwidth requires careful antenna design and tuning to achieve optimal performance.
In terms of propagation, the 1.25-meter band is subject to ionospheric propagation, which can be affected by solar activity and geomagnetic storms.
For more insights, see: Are Public Safety Frequencies Narrow Band
Equipment
Equipment for the 222 MHz band is limited due to its restricted availability in Region 2. Very little current-manufactured equipment supports it.
Examples of equipment that do support 222 MHz include the Alinco DR-235T, the Kenwood TH-F6A, and the U.S. versions of the Yaesu VX-7R and VX-6RHT. These devices are often handheld or small in size.
New multiband mobile or base equipment for 222 MHz is not readily available commercially at this time. Conversion of commercial land-mobile radio equipment for radio amateur use is more difficult on 222 MHz.
Adaptation of surplus commercial base station equipment (such as the Motorola Micor or GE Mastr II series) to repeater operation is possible but requires extensive RF modification. Hamtronics does manufacture new single-channel receiver and transmitter boards suitable for the construction of radio amateur repeater systems on 222 MHz.
On a similar theme: Base Band 5

Many amateurs use transverters on this band, especially those who do weak-signal work.
Here's a list of some handheld transceivers that support the 1.25-meter band:
Modulation
Modulation is an essential aspect of amateur radio communication.
Operation in the lower band is typically CW and SSB.
The 6 metre and 2 metre bands also operate in a similar way, with CW and SSB being the primary modes.
FM is used in the upper band.
Propagation
Propagation on the 222 MHz band is primarily line of sight. This means signals travel directly from the transmitter to the receiver without much interference.
Enhanced modes do exist, but they're not as common as line of sight propagation. Tropospheric ducting, which can bend signals around obstacles, is one of these enhanced modes.
Aurora propagation, a less common phenomenon, can also occur on this band.
History and Operations
The 1.25-meter band has a fascinating history that's worth exploring. In 1938, the Federal Communications Commission (FCC) approved VHF bands, including 224 MHz, which is also known as the 1.25-meter band.
Radio equipment for this band was scarce in the early days, making it difficult for amateurs to operate. Amateurs had to either build their own equipment or buy specialized amateur radio gear, such as transverters.
The 1.25-meter band never gained as much popularity as the 2m and 70cm bands, which became the go-to bands in the 1960s and 1970s.
Recommended read: Verizon 4g Bands
222 MHz History
Amateur radio on 222 MHz has a fascinating history that's worth exploring. The Federal Communications Commission (FCC) approved VHF bands in 1938, including 224 MHz, which was later referred to as the 1.25m band.
Radio equipment for 1.25 meters was scarce in the beginning, partly due to lack of commercial rigs that could be easily converted for the band. Amateurs wanting to operate here generally had to build their own equipment or buy specialized amateur radio equipment, such as transverters.
The 1960s and 1970s saw a surge in amateur radio activity, with the 2m and 70cm bands becoming incredibly popular. The 1.25m band, however, never gained the same level of traction.
In 1988, the FCC adopted the 220 MHz Allocation Order, which reallocated 220–222 MHz to private and federal government land-mobile use.
Explore further: Ham Radio Technician Bands
But Not Impossible

Making a SSB voice contact or grabbing the key and finding someone to respond in CW on 222.1MHz is a very exciting thing, because it is a rarity.
You can start with 222.1MHz to make CW and SSB contacts.
Are you a 222 DXer?
Auxiliary Stations
Auxiliary stations are a crucial part of the 1.25-meter band, allowing for remote control of repeaters and unattended stations.
In the United States, auxiliary stations are limited to operation on frequencies above 144.5MHz, excluding certain bands, making the 1.25-meter band a vital option for remote control links.
Manufacturers like Kenwood, Yaesu, and Icom often don't offer transceiver models that cover the frequency range, due to the band's allocation mostly in ITU Region 2.
This lack of equipment availability exacerbates the underutilization of the 1.25-meter band, with manufacturers citing poor sales compared to other products.
Here's a list of some auxiliary station equipment that does cover the 1.25-meter band:
These devices provide a vital link for remote control and monitoring of repeaters and other stations, making the 1.25-meter band a valuable resource for amateur radio operators.
General Information
The 1.25-meter band has a unique history, with amateur use at an all-time high in the 1980s. In an attempt to increase use on the band, the FCC modified the Novice license in 1987 to allow voice privileges on portions of the 1.25-meter and 23-centimeter bands.
The calling frequency for 1.25m is 223.500 FM, which falls within the 223.400 - 223.520 FM simplex range of the band. Conventional spacing of 20kHz is used between channels for the 1.25M band.
Here's a breakdown of the FM Simplex range for the 1.25-meter band:
Get Privileges
In the 1980s, amateur use of 2-meter and 70-centimeter bands was at an all-time high.
By the 1980s, amateur use of 2-meter and 70-centimeter bands was at an all-time high while activity on 1.25 meters remained stagnant.
Many amateurs called for holders of Novice-class licenses to be given voice privileges on the 1.25-meter band.
In an attempt to increase use on the band, many amateurs called for holders of Novice-class licenses to be given voice privileges on the band.
Take a look at this: 2 Meter Band Frequencies

The FCC modified the Novice license in 1987 to allow voice privileges on portions of the 1.25-meter and 23-centimeter bands.
In 1987, the FCC modified the Novice license to allow voice privileges on portions of the 1.25-meter and 23-centimeter bands.
Some of the bigger amateur radio equipment manufacturers started producing equipment for 1.25 meters in response to the new privileges.
However, it never sold well, and by the early 1990s, most manufacturers had stopped producing equipment for the band.
See what others are reading: 23-centimeter Band
Calling Frequency 223.500 FM
The calling frequency for 1.25m is 223.500 FM, which falls within the 223.400 - 223.520 FM simplex range of the band.
This frequency is part of the FM simplex range, which is used for two-way communication. The conventional spacing of 20kHz is used between channels for the 1.25M band.
According to the ARRL Band Plan, the calling frequency for FM simplex is 223.50 MHz. This frequency is used as a common point for communication between operators.
Here's a list of the FM simplex frequencies in the 223.40 - 223.52 MHz range:
Frequently Asked Questions
What is the offset of 1.25 meter band?
The offset of the 1.25 meter band is 1.6 MHz. This means a repeater on this band would typically have an input frequency 1.6 MHz below its output frequency.
What is the maximum power a novice class operator can transmit on a 1.25 meter band?
For the 1.25 meter band, a Novice operator's maximum transmission power is 25 W PEP. This power limit applies to ensure safe and responsible amateur radio operation.
Featured Images: pexels.com


